Davinci's MDIO controller is present on other TI devices, without an
accompanying EMAC. For example, on tnetv107x, the same MDIO module is used in
conjunction with a 3-port switch hardware.
By separating the MDIO controller code into its own platform driver, this
patch allows common logic to be reused on such platforms.
Signed-off-by: Cyril Chemparathy <cyril@xxxxxx>
---
drivers/net/Kconfig | 10 +
drivers/net/Makefile | 1 +
drivers/net/davinci_mdio.c | 386 ++++++++++++++++++++++++++++++++++++++++++
include/linux/davinci_emac.h | 4 +
4 files changed, 401 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/davinci_mdio.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2decc59..fe6658a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -947,6 +947,16 @@ config TI_DAVINCI_EMAC
To compile this driver as a module, choose M here: the module
will be called davinci_emac_driver. This is recommended.
+config TI_DAVINCI_MDIO
+ tristate "TI DaVinci MDIO Support"
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ select PHYLIB
+ help
+ This driver supports TI's DaVinci MDIO module.
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_mdio. This is recommended.
+
config DM9000
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0a0512a..84cf18d 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_PHYLIB) += phy/
obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
+obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_E1000E) += e1000e/
diff --git a/drivers/net/davinci_mdio.c b/drivers/net/davinci_mdio.c
new file mode 100644
index 0000000..d34a53a
--- /dev/null
+++ b/drivers/net/davinci_mdio.c
@@ -0,0 +1,386 @@
+/*
+ * DaVinci MDIO Module driver
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * Shamelessly ripped out of davinci_emac.c, original copyrights follow:
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ---------------------------------------------------------------------------
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/davinci_emac.h>
+
+#define PHY_REG_MASK 0x1f
+#define PHY_ID_MASK 0x1f
+
+#define DEF_OUT_FREQ 2200000 /* 2.2 MHz */
+
+struct davinci_mdio_regs {
+ u32 version;
+ u32 control;
+#define CONTROL_IDLE BIT(31)
+#define CONTROL_ENABLE BIT(30)
+#define CONTROL_MAX_DIV (0xff)
+
+ u32 alive;
+ u32 link;
+ u32 linkintraw;
+ u32 linkintmasked;
+ u32 __reserved_0[2];
+ u32 userintraw;
+ u32 userintmasked;
+ u32 userintmaskset;
+ u32 userintmaskclr;
+ u32 __reserved_1[20];
+
+ struct {
+ u32 access;
+#define USERACCESS_GO BIT(31)
+#define USERACCESS_WRITE BIT(30)
+#define USERACCESS_ACK BIT(29)
+#define USERACCESS_READ (0)
+#define USERACCESS_DATA (0xffff)
+
+ u32 physel;
+ } user[0];
+};
+
+struct mdio_platform_data default_pdata = {
+ .bus_freq = DEF_OUT_FREQ,
+};
+
+struct davinci_mdio_data {
+ struct mdio_platform_data pdata;
+ struct davinci_mdio_regs __iomem *regs;
+ spinlock_t lock;
+ struct clk *clk;
+ struct device *dev;
+ struct mii_bus *bus;
+ bool suspended;
+};
+
+/* wait until hardware is ready for another user access */
+static inline u32 wait_for_user_access(struct davinci_mdio_data *data)
+{
+ struct davinci_mdio_regs __iomem *regs = data->regs;
+ u32 reg;
+
+ while ((reg = __raw_readl(®s->user[0].access)) & USERACCESS_GO)
+ ;
+
+ return reg;
+}
+
+/* wait until hardware state machine is idle */
+static inline void wait_for_idle(struct davinci_mdio_data *data)
+{
+ struct davinci_mdio_regs __iomem *regs = data->regs;
+
+ while ((__raw_readl(®s->control) & CONTROL_IDLE) == 0)
+ ;
+}
+
+static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg)
+{
+ struct davinci_mdio_data *data = bus->priv;
+ u32 reg;
+
+ if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
+ return -EINVAL;
+
+ spin_lock(&data->lock);
+
+ if (data->suspended) {
+ spin_unlock(&data->lock);
+ return -ENODEV;
+ }
+
+ wait_for_user_access(data);
+ reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) |
+ (phy_id << 16));
+ __raw_writel(reg, &data->regs->user[0].access);
+ reg = wait_for_user_access(data);
+ spin_unlock(&data->lock);
+
+ return (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO;
+}
+
+static int davinci_mdio_write(struct mii_bus *bus, int phy_id,
+ int phy_reg, u16 phy_data)
+{
+ struct davinci_mdio_data *data = bus->priv;
+ u32 reg;
+
+ if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
+ return -EINVAL;
+
+ spin_lock(&data->lock);
+
+ if (data->suspended) {
+ spin_unlock(&data->lock);
+ return -ENODEV;
+ }
+
+ wait_for_user_access(data);
+ reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) |
+ (phy_id << 16) | (phy_data & USERACCESS_DATA));
+ __raw_writel(reg, &data->regs->user[0].access);
+ wait_for_user_access(data);
+ spin_unlock(&data->lock);
+
+ return 0;
+}
+
+static int __devinit davinci_mdio_probe(struct platform_device *pdev)
+{
+ struct mdio_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct davinci_mdio_data *data;
+ struct resource *res;
+ u32 mdio_in_freq, mdio_out_freq, div, phy_mask, ver;
+ struct phy_device *phy;
+ int ret, addr;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(dev, "failed to alloc device data\n");
+ return -ENOMEM;
+ }
+
+ data->pdata = pdata ? (*pdata) : default_pdata;
+
+ data->bus = mdiobus_alloc();
+ if (!data->bus) {
+ dev_err(dev, "failed to alloc mii bus\n");
+ ret = -ENOMEM;
+ goto bail_out;
+ }
+
+ data->bus->name = dev_name(dev);
+ data->bus->read = davinci_mdio_read,
+ data->bus->write = davinci_mdio_write,
+ data->bus->parent = dev;
+ data->bus->priv = data;
+ snprintf(data->bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
+
+ data->clk = clk_get(dev, NULL);
+ if (IS_ERR(data->clk)) {
+ data->clk = NULL;
+ dev_err(dev, "failed to get device clock\n");
+ ret = PTR_ERR(data->clk);
+ goto bail_out;
+ }
+
+ clk_enable(data->clk);
+
+ dev_set_drvdata(dev, data);
+ data->dev = dev;
+ spin_lock_init(&data->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "could not find register map resource\n");
+ ret = -ENOENT;
+ goto bail_out;
+ }
+
+ res = devm_request_mem_region(dev, res->start, resource_size(res),
+ dev_name(dev));
+ if (!res) {
+ dev_err(dev, "could not allocate register map resource\n");
+ ret = -ENXIO;
+ goto bail_out;
+ }
+
+ data->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
+ if (!data->regs) {
+ dev_err(dev, "could not map mdio registers\n");
+ ret = -ENOMEM;
+ goto bail_out;
+ }
+
+ mdio_in_freq = clk_get_rate(data->clk);
+ div = (mdio_in_freq / data->pdata.bus_freq) - 1;
+ if (div > CONTROL_MAX_DIV)
+ div = CONTROL_MAX_DIV;
+ mdio_out_freq = mdio_in_freq / (div + 1);
+
+ /* set enable and clock divider */
+ __raw_writel(div | CONTROL_ENABLE, &data->regs->control);
+
+ /*
+ * wait for scan logic to settle:
+ * the scan time consists of (a) a large fixed component, and (b) a
+ * small component that varies with the mii bus frequency. These
+ * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x
+ * silicon. Since the effect of (b) was found to be largely
+ * negligible, we keep things simple here.
+ */
+ mdelay(1);
+
+ /* dump hardware version info */
+ ver = __raw_readl(&data->regs->version);
+ dev_info(dev, "davinci mdio revision %d.%d\n",
+ (ver >> 8) & 0xff, ver & 0xff);
+
+ /* get phy mask from the alive register */
+ phy_mask = __raw_readl(&data->regs->alive);
+ if (phy_mask) {
+ /* restrict mdio bus to live phys only */
+ dev_info(dev, "detected phy mask %x\n", ~phy_mask);
+ phy_mask = ~phy_mask;
+ } else {
+ /* desperately scan all phys */
+ dev_warn(dev, "failed to detect live phys, scanning all\n");
+ phy_mask = 0;
+ }
+ data->bus->phy_mask = phy_mask;
+
+ /* register the mii bus */
+ ret = mdiobus_register(data->bus);
+ if (ret)
+ goto bail_out;
+
+ /* scan and dump the bus */
+ for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+ phy = data->bus->phy_map[addr];
+ if (phy) {
+ dev_info(dev, "phy[%d]: device %s, driver %s\n",
+ phy->addr, dev_name(&phy->dev),
+ phy->drv ? phy->drv->name : "unknown");
+ }
+ }
+
+ return 0;
+
+bail_out:
+ if (data->bus)
+ mdiobus_free(data->bus);
+
+ if (data->clk) {
+ clk_disable(data->clk);
+ clk_put(data->clk);
+ }
+
+ kfree(data);
+
+ return ret;
+}
+
+static int __devexit davinci_mdio_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct davinci_mdio_data *data = dev_get_drvdata(dev);
+
+ if (data->bus)
+ mdiobus_free(data->bus);
+
+ if (data->clk) {
+ clk_disable(data->clk);
+ clk_put(data->clk);
+ }
+
+ dev_set_drvdata(dev, NULL);
+
+ kfree(data);
+
+ return 0;
+}
+
+static int davinci_mdio_suspend(struct device *dev)
+{
+ struct davinci_mdio_data *data = dev_get_drvdata(dev);
+ u32 ctrl;
+
+ spin_lock(&data->lock);
+
+ /* shutdown the scan state machine */
+ ctrl = __raw_readl(&data->regs->control);
+ ctrl &= ~CONTROL_ENABLE;
+ __raw_writel(ctrl, &data->regs->control);
+ wait_for_idle(data);
+
+ if (data->clk)
+ clk_disable(data->clk);
+
+ data->suspended = true;
+ spin_unlock(&data->lock);
+
+ return 0;
+}
+
+static int davinci_mdio_resume(struct device *dev)
+{
+ struct davinci_mdio_data *data = dev_get_drvdata(dev);
+ u32 ctrl;
+
+ spin_lock(&data->lock);
+ if (data->clk)
+ clk_enable(data->clk);
+
+ /* restart the scan state machine */
+ ctrl = __raw_readl(&data->regs->control);
+ ctrl |= CONTROL_ENABLE;
+ __raw_writel(ctrl, &data->regs->control);
+
+ data->suspended = false;
+ spin_unlock(&data->lock);
+
+ return 0;
+}
+
+static const struct dev_pm_ops davinci_mdio_pm_ops = {
+ .suspend = davinci_mdio_suspend,
+ .resume = davinci_mdio_resume,
+};
+
+static struct platform_driver davinci_mdio_driver = {
+ .driver = {
+ .name = "davinci_mdio",
+ .owner = THIS_MODULE,
+ .pm = &davinci_mdio_pm_ops,
+ },
+ .probe = davinci_mdio_probe,
+ .remove = __devexit_p(davinci_mdio_remove),
+};
+
+static int __init davinci_mdio_init(void)
+{
+ return platform_driver_register(&davinci_mdio_driver);
+}
+device_initcall(davinci_mdio_init);
+
+static void __exit davinci_mdio_exit(void)
+{
+ platform_driver_unregister(&davinci_mdio_driver);
+}
+module_exit(davinci_mdio_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DaVinci MDIO driver");
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index 7c930db..a04fd8c 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -14,6 +14,10 @@
#include <linux/if_ether.h>
#include <linux/memory.h>
+struct mdio_platform_data {
+ unsigned long bus_freq;
+};
+
struct emac_platform_data {
char mac_addr[ETH_ALEN];
u32 ctrl_reg_offset;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
