> -----Original Message-----
> From: Sin, David
> Sent: Saturday, July 24, 2010 4:52 AM
> To: linux-arm-kernel@xxxxxxxxxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx;
> Tony Lindgren; Russell King
> Cc: Kanigeri, Hari; Ohad Ben-Cohen; Hiremath, Vaibhav; Shilimkar, Santosh;
> Sin, David; Molnar, Lajos
> Subject: [RFC 1/8] TILER-DMM: DMM-PAT driver for TI TILER
>
> This patch adds support for DMM-PAT initialization and programming.
>
[Hiremath, Vaibhav] Sorry for delayed response, always better late than never.
> Signed-off-by: David Sin <davidsin@xxxxxx>
> Signed-off-by: Lajos Molnar <molnar@xxxxxx>
> ---
> arch/arm/mach-omap2/include/mach/dmm.h | 128 ++++++++++++++++++++
> drivers/media/video/tiler/dmm.c | 200
> ++++++++++++++++++++++++++++++++
> 2 files changed, 328 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-omap2/include/mach/dmm.h
> create mode 100644 drivers/media/video/tiler/dmm.c
>
[Hiremath, Vaibhav] If I understand correctly, DMM stands for dynamic memory manager. Is it something which can only be used with Video devices? Any specific reason why this is part of drivers/media/video/ directory,
> diff --git a/arch/arm/mach-omap2/include/mach/dmm.h b/arch/arm/mach-
> omap2/include/mach/dmm.h
> new file mode 100644
> index 0000000..68b798a
> --- /dev/null
> +++ b/arch/arm/mach-omap2/include/mach/dmm.h
> @@ -0,0 +1,128 @@
> +/*
> + * dmm.h
> + *
> + * DMM driver support functions for TI DMM-TILER hardware block.
> + *
> + * Author: David Sin <davidsin@xxxxxx>
> + *
> + * Copyright (C) 2009-2010 Texas Instruments, Inc.
> + *
> + * This package is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
> + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
> + */
> +
> +#ifndef DMM_H
> +#define DMM_H
> +
> +#define DMM_BASE 0x4E000000
> +#define DMM_SIZE 0x800
[Hiremath, Vaibhav] Unused definition (DMM_SIZE), do we required it?
> +
> +#define DMM_REVISION 0x000
> +#define DMM_HWINFO 0x004
> +#define DMM_LISA_HWINFO 0x008
> +#define DMM_DMM_SYSCONFIG 0x010
> +#define DMM_LISA_LOCK 0x01C
> +#define DMM_LISA_MAP__0 0x040
> +#define DMM_LISA_MAP__1 0x044
> +#define DMM_TILER_HWINFO 0x208
> +#define DMM_TILER_OR__0 0x220
> +#define DMM_TILER_OR__1 0x224
> +#define DMM_PAT_HWINFO 0x408
> +#define DMM_PAT_GEOMETRY 0x40C
> +#define DMM_PAT_CONFIG 0x410
> +#define DMM_PAT_VIEW__0 0x420
> +#define DMM_PAT_VIEW__1 0x424
> +#define DMM_PAT_VIEW_MAP__0 0x440
> +#define DMM_PAT_VIEW_MAP_BASE 0x460
> +#define DMM_PAT_IRQ_EOI 0x478
> +#define DMM_PAT_IRQSTATUS_RAW 0x480
> +#define DMM_PAT_IRQSTATUS 0x490
> +#define DMM_PAT_IRQENABLE_SET 0x4A0
> +#define DMM_PAT_IRQENABLE_CLR 0x4B0
> +#define DMM_PAT_STATUS__0 0x4C0
> +#define DMM_PAT_STATUS__1 0x4C4
> +#define DMM_PAT_STATUS__2 0x4C8
> +#define DMM_PAT_STATUS__3 0x4CC
> +#define DMM_PAT_DESCR__0 0x500
> +#define DMM_PAT_AREA__0 0x504
> +#define DMM_PAT_CTRL__0 0x508
> +#define DMM_PAT_DATA__0 0x50C
[Hiremath, Vaibhav] Not sure whether somebody has given same comment or not, any specific reason behind double _ here?
> +#define DMM_PEG_HWINFO 0x608
> +#define DMM_PEG_PRIO 0x620
> +#define DMM_PEG_PRIO_PAT 0x640
> +
> +/**
> + * PAT refill programming mode.
> + */
> +enum pat_mode {
> + MANUAL,
> + AUTO
> +};
> +
> +/**
> + * Area definition for DMM physical address translator.
> + */
> +struct pat_area {
> + s32 x0:8;
> + s32 y0:8;
> + s32 x1:8;
> + s32 y1:8;
> +};
> +
> +/**
> + * DMM physical address translator control.
> + */
> +struct pat_ctrl {
> + s32 start:4;
> + s32 dir:4;
> + s32 lut_id:8;
> + s32 sync:12;
> + s32 ini:4;
> +};
> +
> +/**
> + * PAT descriptor.
> + */
> +struct pat {
> + struct pat *next;
> + struct pat_area area;
> + struct pat_ctrl ctrl;
> + u32 data;
> +};
> +
> +/**
> + * DMM device data
> + */
> +struct dmm {
> + void __iomem *base;
> +};
> +
> +/**
> + * Create and initialize the physical address translator.
> + * @param id PAT id
> + * @return pointer to device data
> + */
> +struct dmm *dmm_pat_init(u32 id);
> +
> +/**
> + * Program the physical address translator.
> + * @param dmm Device data
> + * @param desc PAT descriptor
> + * @param mode programming mode
> + * @return an error status.
> + */
> +s32 dmm_pat_refill(struct dmm *dmm, struct pat *desc, enum pat_mode mode);
> +
> +/**
> + * Clean up the physical address translator.
> + * @param dmm Device data
> + * @return an error status.
> + */
> +void dmm_pat_release(struct dmm *dmm);
> +
> +#endif
> diff --git a/drivers/media/video/tiler/dmm.c
> b/drivers/media/video/tiler/dmm.c
> new file mode 100644
> index 0000000..e715936
> --- /dev/null
> +++ b/drivers/media/video/tiler/dmm.c
> @@ -0,0 +1,200 @@
> +/*
> + * dmm.c
> + *
> + * DMM driver support functions for TI OMAP processors.
> + *
> + * Authors: David Sin <davidsin@xxxxxx>
> + * Lajos Molnar <molnar@xxxxxx>
> + *
> + * Copyright (C) 2009-2010 Texas Instruments, Inc.
> + *
> + * This package is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
> + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h> /* platform_device() */
> +#include <linux/io.h> /* ioremap() */
[Hiremath, Vaibhav] No need to specify comments here actually?
> +#include <linux/errno.h>
> +#include <linux/slab.h>
> +
> +#include <mach/dmm.h>
> +
> +#define MASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb))
> +#define SET_FLD(reg, msb, lsb, val) \
> +(((reg) & ~MASK((msb), (lsb))) | (((val) << (lsb)) & MASK((msb), (lsb))))
> +
> +static struct platform_driver dmm_driver_ldm = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "dmm",
> + },
> + .probe = NULL,
> + .shutdown = NULL,
> + .remove = NULL,
> +};
> +
> +s32 dmm_pat_refill(struct dmm *dmm, struct pat *pd, enum pat_mode mode)
> +{
> + void __iomem *r;
> + u32 v;
> +
> + /* Only manual refill supported */
> + if (mode != MANUAL)
> + return -EFAULT;
> +
> + /* Check that the DMM_PAT_STATUS register has not reported an error */
> + r = dmm->base + DMM_PAT_STATUS__0;
> + v = __raw_readl(r);
> + if (WARN(v & 0xFC00, KERN_ERR "dmm_pat_refill() error.\n"))
> + return -EIO;
> +
> + /* Set "next" register to NULL */
> + r = dmm->base + DMM_PAT_DESCR__0;
> + v = __raw_readl(r);
> + v = SET_FLD(v, 31, 4, (u32) NULL);
> + __raw_writel(v, r);
> +
> + /* Set area to be refilled */
> + r = dmm->base + DMM_PAT_AREA__0;
> + v = __raw_readl(r);
> + v = SET_FLD(v, 30, 24, pd->area.y1);
> + v = SET_FLD(v, 23, 16, pd->area.x1);
> + v = SET_FLD(v, 14, 8, pd->area.y0);
> + v = SET_FLD(v, 7, 0, pd->area.x0);
> + __raw_writel(v, r);
> + wmb();
> +
> + /* First, clear the DMM_PAT_IRQSTATUS register */
> + r = dmm->base + DMM_PAT_IRQSTATUS;
> + __raw_writel(0xFFFFFFFF, r);
> + wmb();
> +
> + r = dmm->base + DMM_PAT_IRQSTATUS_RAW;
> + while (__raw_readl(r) != 0)
> + ;
> +
[Hiremath, Vaibhav] Get rid of infinite loop??
> + /* Fill data register */
> + r = dmm->base + DMM_PAT_DATA__0;
> + v = __raw_readl(r);
> +
> + v = SET_FLD(v, 31, 4, pd->data >> 4);
> + __raw_writel(v, r);
> + wmb();
> +
> + /* Read back PAT_DATA__0 to see if write was successful */
> + while (__raw_readl(r) != pd->data)
> + ;
> +
> + r = dmm->base + DMM_PAT_CTRL__0;
> + v = __raw_readl(r);
> + v = SET_FLD(v, 31, 28, pd->ctrl.ini);
> + v = SET_FLD(v, 16, 16, pd->ctrl.sync);
> + v = SET_FLD(v, 9, 8, pd->ctrl.lut_id);
> + v = SET_FLD(v, 6, 4, pd->ctrl.dir);
> + v = SET_FLD(v, 0, 0, pd->ctrl.start);
> + __raw_writel(v, r);
> + wmb();
> +
> + /* Check if PAT_IRQSTATUS_RAW is set after the PAT has been refilled
> */
> + r = dmm->base + DMM_PAT_IRQSTATUS_RAW;
> + while ((__raw_readl(r) & 0x3) != 0x3)
> + ;
> +
> + /* Again, clear the DMM_PAT_IRQSTATUS register */
> + r = dmm->base + DMM_PAT_IRQSTATUS;
> + __raw_writel(0xFFFFFFFF, r);
> + wmb();
> +
> + r = dmm->base + DMM_PAT_IRQSTATUS_RAW;
> + while (__raw_readl(r) != 0)
> + ;
[Hiremath, Vaibhav] Do you want to wait on whole register value or one specific bit here?
> +
> + /* Again, set "next" register to NULL to clear any PAT STATUS errors
> */
> + r = dmm->base + DMM_PAT_DESCR__0;
> + v = __raw_readl(r);
> + v = SET_FLD(v, 31, 4, (u32) NULL);
[Hiremath, Vaibhav] Why NULL, can't pass directly 0 here?
Thanks,
Vaibhav
> + __raw_writel(v, r);
> +
> + /*
> + * Now, check that the DMM_PAT_STATUS register
> + * has not reported an error before exiting.
> + */
> + r = dmm->base + DMM_PAT_STATUS__0;
> + v = __raw_readl(r);
> + if (WARN(v & 0xFC00, KERN_ERR "dmm_pat_refill() error.\n"))
> + return -EIO;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dmm_pat_refill);
> +
> +struct dmm *dmm_pat_init(u32 id)
> +{
> + u32 base;
> + struct dmm *dmm;
> + switch (id) {
> + case 0:
> + /* only support id 0 for now */
> + base = DMM_BASE;
> + break;
> + default:
> + return NULL;
> + }
> +
> + dmm = kzalloc(sizeof(*dmm), GFP_KERNEL);
> + if (!dmm)
> + return NULL;
> +
> + dmm->base = ioremap(base, DMM_SIZE);
> + if (!dmm->base) {
> + kfree(dmm);
> + return NULL;
> + }
> +
> + __raw_writel(0x88888888, dmm->base + DMM_PAT_VIEW__0);
> + __raw_writel(0x88888888, dmm->base + DMM_PAT_VIEW__1);
> + __raw_writel(0x80808080, dmm->base + DMM_PAT_VIEW_MAP__0);
> + __raw_writel(0x80000000, dmm->base + DMM_PAT_VIEW_MAP_BASE);
> + __raw_writel(0x88888888, dmm->base + DMM_TILER_OR__0);
> + __raw_writel(0x88888888, dmm->base + DMM_TILER_OR__1);
> +
> + return dmm;
> +}
> +EXPORT_SYMBOL(dmm_pat_init);
> +
> +/**
> + * Clean up the physical address translator.
> + * @param dmm Device data
> + * @return an error status.
> + */
> +void dmm_pat_release(struct dmm *dmm)
> +{
> + if (dmm) {
> + iounmap(dmm->base);
> + kfree(dmm);
> + }
> +}
> +EXPORT_SYMBOL(dmm_pat_release);
> +
> +static s32 __init dmm_init(void)
> +{
> + return platform_driver_register(&dmm_driver_ldm);
> +}
> +
> +static void __exit dmm_exit(void)
> +{
> + platform_driver_unregister(&dmm_driver_ldm);
> +}
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("davidsin@xxxxxx");
> +MODULE_AUTHOR("molnar@xxxxxx");
> +module_init(dmm_init);
> +module_exit(dmm_exit);
> --
> 1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
