Hi, On Wed, 23 Jun 2010, Kevin Hilman wrote: > From: Rajendra Nayak <rnayak@xxxxxx> > > Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> > Signed-off-by: Benoit Cousson <b-cousson@xxxxxx> > Cc: Paul Walmsley <paul@xxxxxxxxx> > Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> This patch has been updated to include Benoît's compile fix; revised patch below. - Paul OMAP4: hwmod: Enable omap_device build for OMAP4 From: Rajendra Nayak <rnayak@xxxxxx> Enable omap_device layer support for OMAP4, so that drivers can use them to enable/idle/shutdown devices. Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> Signed-off-by: Benoit Cousson <b-cousson@xxxxxx> Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/plat-omap/Makefile | 1 + 2 files changed, 2 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 6c6d7c6..2fa3418 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -15,7 +15,7 @@ clock-common = clock.o clock_common_data.o \ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) -obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) +obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 98f0191..9405831 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o +obj-$(CONFIG_ARCH_OMAP4) += omap_device.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
