Use the new mux function for that.
Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Cc: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/board-apollon.c | 3 +++
drivers/video/omap/lcd_apollon.c | 3 ---
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index b86a879..bc67026 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -332,6 +332,9 @@ static void __init omap_apollon_init(void)
/* REVISIT: where's the correct place */
omap_cfg_reg(W19_24XX_SYS_NIRQ);
+ /* LCD PWR_EN */
+ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
+
/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
v |= (1 << 24);
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
index 2be94eb..10459d8 100644
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -25,7 +25,6 @@
#include <linux/platform_device.h>
#include <mach/gpio.h>
-#include <plat/mux.h>
#include "omapfb.h"
@@ -34,8 +33,6 @@
static int apollon_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
- /* configure LCD PWR_EN */
- omap_cfg_reg(M21_242X_GPIO11);
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
