Re: [PATCH v5 2/2] OMAP4 HSMMC: Adding card detect support for MMC1 Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 29, 2010 at 1:00 PM, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
> ext kishore kadiyala wrote:
>>
>> Adrian ,
>>
>> Sorry for the late response
>>
>> <snip>
>>>
>>> As per my email 5/5/10, I would suggest the only change to omap_hsmmc is:
>>
>> Agreed  and followed the changes mostly but made some more changes on top
>> of it.
>>
>> <snip>
>>>
>>> And that the late init function is used to do the rest e.g.
>>> find a home for these 3 functions:
>>
>> I agree just having the 3 functions makes it work.
>>
>>> static int omap4_twl6030_hsmmc_late_init(struct device *dev)
>>> {
>>>       int ret = 0;
>>>       struct platform_device *pdev = container_of(dev,
>>>                                       struct platform_device, dev);
>>>       struct omap_mmc_platform_data *pdata = dev->platform_data;
>>>
>>>       /* MMC1 Card detect Configuration */
>>>       if (pdev->id == 0) {
>>>               ret = omap4_hsmmc1_card_detect_config();
>>>               if (ret < 0)
>>>                       pr_err("Unable to configure Card detect for
>>> MMC1\n");
>>>               pdata->slots[0].card_detect = twl6030_mmc_card_detect;
>>>               pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
>>>                                                 MMCDETECT_INTR_OFFSET;
>>>       }
>>>       return ret;
>>
>> <snip>
>>
>> Few Comments below:
>>
>> 1) In the above function, initializing "card_detect"  in the driver as
>> done in omap_hsmmc_gpio_init might be more readable and this has been
>> done in nongpio_init instead.
>> Even having initialization of  "card_detect_irq" inside nongpio_init is
>> fine.
>
> The problem is that referencing twl6030 from omap_hsmmc.c is not ok.
> The driver must work with any platform and that is the reason that
> platform data provides callbacks.

ok, in that case how about having handler initialized in
mach-omap2/hsmmc.c  for both gpio and non-gpio case.

-Kishore
>
>>
>> 2)Also calling omap_hsmmc_gpio_init in case of a card detect line
>> which is not GPIO
>> doesn't make sense though it assigns -EINVAL to switch_pin in case of
>> invalid GPIO
>> which is intended for a non-removable card .
>>
>> 3) And also having some thing like GPIO and NON_GPIO flag to
>> distinguish might make sense.
>>
>> Regards,
>> Kishore
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux