On Wed, Jun 23, 2010 at 4:03 PM, Ghorai, Sukumar <s-ghorai@xxxxxx> wrote: > [Ghorai] It's working for me. it's good to hear ! This is what I see: ## Booting image at 81c00000 ... Image Name: Linux-2.6.35-rc3-00001-g945a7eb Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2409672 Bytes = 2.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. (and then nothing happens, you don't even see the penguin on the screen) > 1. console=ttyS0 are you sure ? all TI's docs state ttyS2 (and this works for me with TI's BSP kernels) but since I don't see the penguin on the screen, I don't think this is the problem btw I see there is CMDLINE in the .config, and also boot cmds that I pass via uboot.. I wonder if they should be the same.. > 2. And can you try omap3_defconfig it doesn't compile: arch/arm/mach-omap2/built-in.o: In function `ads7846_dev_init': linux-2.6/arch/arm/mach-omap2/board-omap3stalker.c:542: undefined reference to `omap_set_gpio_debounce' linux-2.6/arch/arm/mach-omap2/board-omap3stalker.c:543: undefined reference to `omap_set_gpio_debounce_time' I'll see what I can do about it... thank you ! ~pnesh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
