Kevin,
On 6/25/2010 1:44 AM, Kevin Hilman wrote:
From: Rajendra Nayak<rnayak@xxxxxx>
Enable omap_device layer support for OMAP4, so that drivers can
use them to enable/idle/shutdown devices.
Signed-off-by: Rajendra Nayak<rnayak@xxxxxx>
Signed-off-by: Benoit Cousson<b-cousson@xxxxxx>
Cc: Paul Walmsley<paul@xxxxxxxxx>
Signed-off-by: Kevin Hilman<khilman@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/plat-omap/Makefile | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 98f0191..9405831 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
You need as well to enable omap_hwmod.c build otherwise it cannot build
on OMAP4.
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8ed47ea..5de06c3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -15,7 +15,7 @@ clock-common = clock.o
clock_common_data.o \
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common)
$(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common)
$(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
