> -----Original Message----- > From: DebBarma, Tarun Kanti > Sent: Thursday, June 03, 2010 12:49 PM > To: Hiremath, Vaibhav; linux-media@xxxxxxxxxxxxxxx > Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux-omap@xxxxxxxxxxxxxxx > Subject: RE: [PATCH-V1 2/2] AM3517: Add VPFE Capture driver support to board > file > > Vaibhav, > > > > -----Original Message----- > > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Hiremath, Vaibhav > > Sent: Thursday, June 03, 2010 12:12 PM > > To: linux-media@xxxxxxxxxxxxxxx > > Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux- > > omap@xxxxxxxxxxxxxxx; Hiremath, Vaibhav > > Subject: [PATCH-V1 2/2] AM3517: Add VPFE Capture driver support to board > > file > > > > From: Vaibhav Hiremath <hvaibhav@xxxxxx> > > > > Also created vpfe master/slave clock aliases, since naming > > convention is different in both Davinci and AM3517 devices. > > > > Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> > > --- > > arch/arm/mach-omap2/board-am3517evm.c | 161 > > +++++++++++++++++++++++++++++++++ > > 1 files changed, 161 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach- > > omap2/board-am3517evm.c > > index c1c4389..f2ff751 100644 > > --- a/arch/arm/mach-omap2/board-am3517evm.c > > +++ b/arch/arm/mach-omap2/board-am3517evm.c > > @@ -30,15 +30,168 @@ > > > > #include <plat/board.h> > > #include <plat/common.h> > > +#include <plat/control.h> > > #include <plat/usb.h> > > #include <plat/display.h> > > > > +#include <media/tvp514x.h> > > +#include <media/davinci/vpfe_capture.h> > > + > > #include "mux.h" > > > > #define LCD_PANEL_PWR 176 > > #define LCD_PANEL_BKLIGHT_PWR 182 > > #define LCD_PANEL_PWM 181 > > > > +/* > > + * VPFE - Video Decoder interface > > + */ > > +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) > > + > > +/* Inputs available at the TVP5146 */ > > +static struct v4l2_input tvp5146_inputs[] = { > > + { > > + .index = 0, > > + .name = "Composite", > > + .type = V4L2_INPUT_TYPE_CAMERA, > > + .std = TVP514X_STD_ALL, > > + }, > > + { > > + .index = 1, > > + .name = "S-Video", > > + .type = V4L2_INPUT_TYPE_CAMERA, > > + .std = TVP514X_STD_ALL, > > + }, > > +}; > > + > > +static struct tvp514x_platform_data tvp5146_pdata = { > > + .clk_polarity = 0, > > + .hs_polarity = 1, > > + .vs_polarity = 1 > > +}; > > + > > +static struct vpfe_route tvp5146_routes[] = { > > + { > > + .input = INPUT_CVBS_VI1A, > > + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, > > + }, > > + { > > + .input = INPUT_SVIDEO_VI2C_VI1C, > > + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, > > + }, > > +}; > > + > > +static struct vpfe_subdev_info vpfe_sub_devs[] = { > > + { > > + .name = "tvp5146", > > + .grp_id = 0, > > + .num_inputs = ARRAY_SIZE(tvp5146_inputs), > > + .inputs = tvp5146_inputs, > > + .routes = tvp5146_routes, > > + .can_route = 1, > > + .ccdc_if_params = { > > + .if_type = VPFE_BT656, > > + .hdpol = VPFE_PINPOL_POSITIVE, > > + .vdpol = VPFE_PINPOL_POSITIVE, > > + }, > > + .board_info = { > > + I2C_BOARD_INFO("tvp5146", 0x5C), > > + .platform_data = &tvp5146_pdata, > > + }, > > + }, > > +}; > > + > > +static void am3517_evm_clear_vpfe_intr(int vdint) > > +{ > > + unsigned int vpfe_int_clr; > > + > > + vpfe_int_clr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); > > + > > + switch (vdint) { > > + /* VD0 interrrupt */ > > + case INT_35XX_CCDC_VD0_IRQ: > > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD0_INT_CLR; > > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD0_INT_CLR; > > + break; > > + /* VD1 interrrupt */ > > + case INT_35XX_CCDC_VD1_IRQ: > > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD1_INT_CLR; > > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD1_INT_CLR; > > + break; > > + /* VD2 interrrupt */ > > + case INT_35XX_CCDC_VD2_IRQ: > > + vpfe_int_clr &= ~AM35XX_VPFE_CCDC_VD2_INT_CLR; > > + vpfe_int_clr |= AM35XX_VPFE_CCDC_VD2_INT_CLR; > > + break; > > + /* Clear all interrrupts */ > > + default: > > + vpfe_int_clr &= ~(AM35XX_VPFE_CCDC_VD0_INT_CLR | > > + AM35XX_VPFE_CCDC_VD1_INT_CLR | > > + AM35XX_VPFE_CCDC_VD2_INT_CLR); > > + vpfe_int_clr |= (AM35XX_VPFE_CCDC_VD0_INT_CLR | > > + AM35XX_VPFE_CCDC_VD1_INT_CLR | > > + AM35XX_VPFE_CCDC_VD2_INT_CLR); > > + break; > > + } > > + omap_ctrl_writel(vpfe_int_clr, AM35XX_CONTROL_LVL_INTR_CLEAR); > > + vpfe_int_clr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); > > Is it necessary to assign to the local variable (vpfe_int_clr)? If not, we > can reduce the size of this routine by two assembly instructions: > One: copying the result to a register > Two: pushing the register value to stack > [Hiremath, Vaibhav] How are you going to achieve this? How are you going to define the switch case values here? Also currently this covers only VPFE Capture related interrupts but this function may required for other modules which are part of IPSS, like HECC, EMAC and USBOTG. Thanks, Vaibhav > -Tarun > > > > +} > > + > > +static struct vpfe_config vpfe_cfg = { > > + .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), > > + .i2c_adapter_id = 3, > > + .sub_devs = vpfe_sub_devs, > > + .clr_intr = am3517_evm_clear_vpfe_intr, > > + .card_name = "AM3517 EVM", > > + .ccdc = "DM6446 CCDC", > > +}; > > + > > +static struct resource vpfe_resources[] = { > > + { > > + .start = INT_35XX_CCDC_VD0_IRQ, > > + .end = INT_35XX_CCDC_VD0_IRQ, > > + .flags = IORESOURCE_IRQ, > > + }, > > + { > > + .start = INT_35XX_CCDC_VD1_IRQ, > > + .end = INT_35XX_CCDC_VD1_IRQ, > > + .flags = IORESOURCE_IRQ, > > + }, > > +}; > > + > > +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); > > +static struct platform_device vpfe_capture_dev = { > > + .name = CAPTURE_DRV_NAME, > > + .id = -1, > > + .num_resources = ARRAY_SIZE(vpfe_resources), > > + .resource = vpfe_resources, > > + .dev = { > > + .dma_mask = &vpfe_capture_dma_mask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + .platform_data = &vpfe_cfg, > > + }, > > +}; > > + > > +static struct resource am3517_ccdc_resource[] = { > > + /* CCDC Base address */ > > + { > > + .start = AM35XX_IPSS_VPFE_BASE, > > + .end = AM35XX_IPSS_VPFE_BASE + 0xffff, > > + .flags = IORESOURCE_MEM, > > + }, > > +}; > > + > > +static struct platform_device am3517_ccdc_dev = { > > + .name = "dm644x_ccdc", > > + .id = -1, > > + .num_resources = ARRAY_SIZE(am3517_ccdc_resource), > > + .resource = am3517_ccdc_resource, > > + .dev = { > > + .dma_mask = &vpfe_capture_dma_mask, > > + .coherent_dma_mask = DMA_BIT_MASK(32), > > + }, > > +}; > > + > > static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = { > > { > > I2C_BOARD_INFO("s35390a", 0x30), > > @@ -46,6 +199,7 @@ static struct i2c_board_info __initdata > > am3517evm_i2c_boardinfo[] = { > > }, > > }; > > > > + > > /* > > * RTC - S35390A > > */ > > @@ -261,6 +415,8 @@ static struct omap_board_config_kernel > > am3517_evm_config[] __initdata = { > > > > static struct platform_device *am3517_evm_devices[] __initdata = { > > &am3517_evm_dss_device, > > + &am3517_ccdc_dev, > > + &vpfe_capture_dev, > > }; > > > > static void __init am3517_evm_init_irq(void) > > @@ -313,6 +469,11 @@ static void __init am3517_evm_init(void) > > > > i2c_register_board_info(1, am3517evm_i2c_boardinfo, > > ARRAY_SIZE(am3517evm_i2c_boardinfo)); > > + > > + clk_add_alias("master", "dm644x_ccdc", "master", > > + &vpfe_capture_dev.dev); > > + clk_add_alias("slave", "dm644x_ccdc", "slave", > > + &vpfe_capture_dev.dev); > > } > > > > static void __init am3517_evm_map_io(void) > > -- > > 1.6.2.4 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
