Only removed error codes which now does not exist, previously those were not used in the code. Signed-off-by: Omar Ramirez Luna <omar.ramirez@xxxxxx> --- arch/arm/plat-omap/include/dspbridge/chnl.h | 1 - arch/arm/plat-omap/include/dspbridge/cod.h | 3 --- arch/arm/plat-omap/include/dspbridge/dblldefs.h | 2 -- arch/arm/plat-omap/include/dspbridge/dev.h | 14 -------------- arch/arm/plat-omap/include/dspbridge/disp.h | 3 --- arch/arm/plat-omap/include/dspbridge/dspdefs.h | 4 ---- arch/arm/plat-omap/include/dspbridge/io.h | 1 - arch/arm/plat-omap/include/dspbridge/nldrdefs.h | 1 - arch/arm/plat-omap/include/dspbridge/node.h | 9 +-------- arch/arm/plat-omap/include/dspbridge/proc.h | 11 ----------- arch/arm/plat-omap/include/dspbridge/strm.h | 1 - 11 files changed, 1 insertions(+), 49 deletions(-) diff --git a/arch/arm/plat-omap/include/dspbridge/chnl.h b/arch/arm/plat-omap/include/dspbridge/chnl.h index ac9acd9..a166d1b 100644 --- a/arch/arm/plat-omap/include/dspbridge/chnl.h +++ b/arch/arm/plat-omap/include/dspbridge/chnl.h @@ -67,7 +67,6 @@ extern dsp_status chnl_close(struct chnl_object *chnl_obj); * -ENOMEM: Insufficient memory for requested resources. * -EIO: Unable to plug channel ISR for configured IRQ. * -ECHRNG: This manager cannot handle this many channels. - * CHNL_E_INVALIDIRQ: Invalid IRQ number. Must be 0 <= birq <= 15. * -EEXIST: Channel manager already exists for this device. * Requires: * chnl_init(void) called. diff --git a/arch/arm/plat-omap/include/dspbridge/cod.h b/arch/arm/plat-omap/include/dspbridge/cod.h index e27f942..16e95c3 100644 --- a/arch/arm/plat-omap/include/dspbridge/cod.h +++ b/arch/arm/plat-omap/include/dspbridge/cod.h @@ -83,7 +83,6 @@ extern void cod_close(struct cod_libraryobj *lib); * will cause default attrs to be used. * Returns: * 0: Success. - * COD_E_NOZLFUNCTIONS: Could not initialize ZL functions. * -ESPIPE: ZL_Create failed. * -ENOSYS: attrs was not NULL. We don't yet support * non default values of attrs. @@ -285,7 +284,6 @@ extern bool cod_init(void); * Returns: * 0: Success. * -EBADF: Failed to open target code. - * COD_E_LOADFAILED: Failed to load code onto target. * Requires: * COD module initialized. * hmgr is valid. @@ -356,7 +354,6 @@ extern dsp_status cod_open_base(struct cod_manager *hmgr, IN char *pszCoffPath, * Returns: * 0: on success, error code on failure * -ESPIPE: Symbols have not been loaded onto the board. - * COD_E_READFAILED: Failed to read content of code section. * Requires: * COD module initialized. * valid cod_mgr_obj. diff --git a/arch/arm/plat-omap/include/dspbridge/dblldefs.h b/arch/arm/plat-omap/include/dspbridge/dblldefs.h index 7b79207..e1a0364 100644 --- a/arch/arm/plat-omap/include/dspbridge/dblldefs.h +++ b/arch/arm/plat-omap/include/dspbridge/dblldefs.h @@ -338,7 +338,6 @@ typedef bool(*dbll_init_fxn) (void); * Returns: * 0: Success. * -EBADF: File read failed. - * DSP_EFWRITE: Write to target failed. * -EILSEQ: Failure in dynamic loader library. * Requires: * DBL initialized. @@ -360,7 +359,6 @@ typedef dsp_status(*dbll_load_fxn) (struct dbll_library_obj *lib, * Returns: * 0: Success. * -ENXIO: Section not found. - * DSP_EFWRITE: Write function failed. * -ENOSYS: Function not implemented. * Requires: * Valid lib. diff --git a/arch/arm/plat-omap/include/dspbridge/dev.h b/arch/arm/plat-omap/include/dspbridge/dev.h index eb9ea39..b4350de 100644 --- a/arch/arm/plat-omap/include/dspbridge/dev.h +++ b/arch/arm/plat-omap/include/dspbridge/dev.h @@ -76,14 +76,7 @@ extern u32 dev_brd_write_fxn(void *pArb, * Returns: * 0: Module is loaded, device object has been created * -ENOMEM: Insufficient memory to create needed resources. - * DEV_E_NEWWMD: The WMD was compiled for a newer version of WCD. - * DEV_E_NULLWMDINTF: WMD passed back a NULL fxn Interface Struct Ptr - * DEV_E_NOCODMODULE: No ZL file name was specified in the registry - * for this dev_node_obj. - * LDR_E_FILEUNABLETOOPEN: Unable to open the specified WMD. - * LDR_E_NOMEMORY: PELDR is out of resources. * -EPERM: Unable to find WMD entry point function. - * COD_E_NOZLFUNCTIONS: One or more ZL functions exports not found. * -ESPIPE: Unable to load ZL DLL. * Requires: * DEV Initialized. @@ -118,14 +111,7 @@ extern dsp_status dev_create_device(OUT struct dev_object * Returns: * 0: Module is loaded, device object has been created * -ENOMEM: Insufficient memory to create needed resources. - * DEV_E_NEWWMD: The WMD was compiled for a newer version of WCD. - * DEV_E_NULLWMDINTF: WMD passed back a NULL fxn Interface Struct Ptr - * DEV_E_NOCODMODULE: No ZL file name was specified in the registry - * for this dev_node_obj. - * LDR_E_FILEUNABLETOOPEN: Unable to open the specified WMD. - * LDR_E_NOMEMORY: PELDR is out of resources. * -EPERM: Unable to find WMD entry point function. - * COD_E_NOZLFUNCTIONS: One or more ZL functions exports not found. * -ESPIPE: Unable to load ZL DLL. * Requires: * DEV Initialized. diff --git a/arch/arm/plat-omap/include/dspbridge/disp.h b/arch/arm/plat-omap/include/dspbridge/disp.h index 22f3b63..c34e08c 100644 --- a/arch/arm/plat-omap/include/dspbridge/disp.h +++ b/arch/arm/plat-omap/include/dspbridge/disp.h @@ -132,10 +132,7 @@ extern dsp_status disp_node_change_priority(struct disp_object * output. * Returns: * 0: Success. - * DSP_ETASK: Unable to create the node's task or process on the DSP. - * DSP_ESTREAM: Stream creation failure on the DSP. * -ETIME: A timeout occurred before the DSP responded. - * DSP_EUSER: A user-defined failure occurred. * -EPERM: A failure occurred, unable to create node. * Requires: * disp_init(void) called. diff --git a/arch/arm/plat-omap/include/dspbridge/dspdefs.h b/arch/arm/plat-omap/include/dspbridge/dspdefs.h index 2a52983..7436539 100644 --- a/arch/arm/plat-omap/include/dspbridge/dspdefs.h +++ b/arch/arm/plat-omap/include/dspbridge/dspdefs.h @@ -58,7 +58,6 @@ struct bridge_dev_context; * hDevContext: Handle to mini-driver defined device context. * Returns: * 0: Success. - * WMD_E_HARDWARE: A test of hardware assumptions/integrity failed. * -ETIMEDOUT: Timeout occured waiting for a response from hardware. * -EPERM: Other, unspecified error. * Requires: @@ -656,9 +655,6 @@ typedef dsp_status(*fxn_chnl_registernotify) * Returns: * 0: Success. * -ENOMEM: Unable to allocate memory for device context. - * WMD_E_BADCONFIG: One or more of the host or DSP configuration - * parameters did not satisfy hardware assumptions - * made by this WMD. * Requires: * phDevContext != NULL; * hdev_obj != NULL; diff --git a/arch/arm/plat-omap/include/dspbridge/io.h b/arch/arm/plat-omap/include/dspbridge/io.h index 7ff2451..6c248ce 100644 --- a/arch/arm/plat-omap/include/dspbridge/io.h +++ b/arch/arm/plat-omap/include/dspbridge/io.h @@ -41,7 +41,6 @@ * 0: Success; * -ENOMEM: Insufficient memory for requested resources. * -EIO: Unable to plug channel ISR for configured IRQ. - * CHNL_E_INVALIDIRQ: Invalid IRQ number. Must be 0 <= birq <= 15. * -EINVAL: Invalid DSP word size (must be > 0). * Invalid base address for DSP communications. * Requires: diff --git a/arch/arm/plat-omap/include/dspbridge/nldrdefs.h b/arch/arm/plat-omap/include/dspbridge/nldrdefs.h index 9ab99d3..440d831 100644 --- a/arch/arm/plat-omap/include/dspbridge/nldrdefs.h +++ b/arch/arm/plat-omap/include/dspbridge/nldrdefs.h @@ -250,7 +250,6 @@ typedef bool(*nldr_initfxn) (void); * -ENXIO: Can't overlay phase because overlay memory * is already in use. * -EILSEQ: Failure in dynamic loader library. - * DSP_EFWRITE: Failed to write phase's code or date to target. * Requires: * nldr_init(void) called. * Valid nldr_node_obj. diff --git a/arch/arm/plat-omap/include/dspbridge/node.h b/arch/arm/plat-omap/include/dspbridge/node.h index ff2c673..d5764b7 100644 --- a/arch/arm/plat-omap/include/dspbridge/node.h +++ b/arch/arm/plat-omap/include/dspbridge/node.h @@ -105,8 +105,6 @@ extern dsp_status node_alloc_msg_buf(struct node_object *hnode, * -EBADR: Node is not in the NODE_ALLOCATED, NODE_PAUSED, * or NODE_RUNNING state. * -ETIME: A timeout occurred before the DSP responded. - * DSP_ERESTART: A critical error has occurred and the DSP is - * being restarted. * Requires: * node_init(void) called. * Ensures: @@ -202,10 +200,7 @@ extern dsp_status node_connect(struct node_object *hNode1, * -ESPIPE: Create function not found in the COFF file. * -EBADR: Node is not in the NODE_ALLOCATED state. * -ENOMEM: Memory allocation failure on the DSP. - * DSP_ETASK: Unable to create node's task or process on the DSP. - * DSP_ESTREAM: Stream creation failure on the DSP. * -ETIME: A timeout occurred before the DSP responded. - * DSP_EUSER1-16: A user-defined failure occurred on the DSP. * -EPERM: A failure occurred, unable to create node. * Requires: * node_init(void) called. @@ -252,8 +247,6 @@ extern dsp_status node_create_mgr(OUT struct node_mgr **phNodeMgr, * 0: Success. * -EFAULT: Invalid hnode. * -ETIME: A timeout occurred before the DSP responded. - * DSP_EDELETE: A deletion failure occurred. - * DSP_EUSER1-16: Node specific failure occurred on the DSP. * -EPERM: A failure occurred in deleting the node. * -ESPIPE: Delete function not found in the COFF file. * Requires: @@ -537,7 +530,7 @@ extern dsp_status node_run(struct node_object *hnode); * hnode: Node object representing a node currently * running on the DSP. * pstatus: Location to store execute-phase function return - * value (DSP_EUSER1-16). + * value. * Returns: * 0: Success. * -EFAULT: Invalid hnode. diff --git a/arch/arm/plat-omap/include/dspbridge/proc.h b/arch/arm/plat-omap/include/dspbridge/proc.h index 561842e..5da3ac2 100644 --- a/arch/arm/plat-omap/include/dspbridge/proc.h +++ b/arch/arm/plat-omap/include/dspbridge/proc.h @@ -91,10 +91,6 @@ extern dsp_status proc_auto_start(struct cfg_devnode *dev_node_obj, * -EFAULT : Invalid processor handle. * -ETIME: A Timeout Occured before the Control information * could be sent. - * DSP_EACCESSDENIED: Client does not have the access rights required - * to call this function. - * DSP_ERESTART: A Critical error has occured and the DSP is being - * restarted. * -EPERM : General Failure. * Requires: * PROC Initialized. @@ -175,8 +171,6 @@ extern dsp_status proc_enum_nodes(void *hprocessor, * -EBADR: The processor is not in the PROC_RUNNING state. * -ETIME: A timeout occured before the DSP responded to the * querry. - * DSP_ERESTART: A Critical error has occured and the DSP is being - * restarted. * -EPERM : Unable to get Resource Information * Requires: * resource_info is not NULL. @@ -322,11 +316,6 @@ extern dsp_status proc_get_trace(void *hprocessor, u8 * pbuf, u32 max_size); * 0: Success. * -ENOENT: The DSP Execuetable was not found. * -EFAULT: Invalid processor handle. - * DSP_ECORRUTFILE: Unable to Parse the DSP Execuetable - * DSP_EATTACHED: Abort because a GPP Client is attached to the - * specified Processor - * DSP_EACCESSDENIED: Client does not have the required access rights - * to reset and load the Processor * -EPERM : Unable to Load the Processor * Requires: * user_args is not NULL diff --git a/arch/arm/plat-omap/include/dspbridge/strm.h b/arch/arm/plat-omap/include/dspbridge/strm.h index 5a8a922..13de4b7 100644 --- a/arch/arm/plat-omap/include/dspbridge/strm.h +++ b/arch/arm/plat-omap/include/dspbridge/strm.h @@ -201,7 +201,6 @@ extern dsp_status strm_get_info(struct strm_object *hStrm, * 0: Success. * -EFAULT: Invalid hStrm. * -ETIME: A timeout occurred before the stream could be idled. - * DSP_ERESTART: A critical error occurred, DSP is being restarted. * -EPERM: Unable to idle stream. * Requires: * strm_init(void) called. -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
