The MMC1 and MMC2 cards have seperate LDO supplies. Current code assumes that they are powered by same LDO. This patch fixes the same and has VAUX1 as supply to MMC2 card. Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> Signed-off-by: Sukumar Ghorai <s-ghorai@xxxxxx> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx> Tested-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> --- Tested with omap3_defconfig on OMAP4430SDP arch/arm/mach-omap2/board-4430sdp.c | 12 ++++++++---- 1 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 7a78986..f62042e 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -384,14 +384,16 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { +static struct regulator_consumer_supply sdp4430_vaux_supply[] = { { .supply = "vmmc", - .dev_name = "mmci-omap-hs.0", + .dev_name = "mmci-omap-hs.1", }, +}; +static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { { .supply = "vmmc", - .dev_name = "mmci-omap-hs.1", + .dev_name = "mmci-omap-hs.0", }, }; @@ -447,6 +449,8 @@ static struct regulator_init_data sdp4430_vaux1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = 1, + .consumer_supplies = sdp4430_vaux_supply, }; static struct regulator_init_data sdp4430_vaux2 = { @@ -487,7 +491,7 @@ static struct regulator_init_data sdp4430_vmmc = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 2, + .num_consumer_supplies = 1, .consumer_supplies = sdp4430_vmmc_supply, }; -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html