Re: [PATCH V2] misc : ROHM BH1780GLI Ambient light sensor Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/26/10 09:30, Hemanth V wrote:
>> From: Hemanth V <hemanthv@xxxxxx>
>> Date: Fri, 21 May 2010 15:52:03 +0530
>> Subject: [PATCH] misc: ROHM BH1780GLI Ambient light sensor Driver
>>
>> This patch adds support for ROHM BH1780GLI Ambient light sensor.
>>
>> BH1780 supports I2C interface. Driver supports read/update of power state and
>> read of lux value (through SYSFS). Writing value 3 to power_state enables the
>> sensor and current lux value could be read.
>>
> Jonathan, Daniel
> 
> If there are no more comments, do you know howto push this to linus tree.
It's in misc, so send a copy (with reference back to review thread)
to Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>

Andrew tends to pick things up eventually for lkml, but he'll notice
it quicker if you cc him in on relevant emails!

Jonathan
> 
> Thanks
> Hemanth
> 
>> Signed-off-by: Hemanth V <hemanthv@xxxxxx>
>> Reviewed-by: Daniel Mack <daniel@xxxxxxxx>
>> Acked-by: Jonathan Cameron <jic23@xxxxxxxxx>
>> ---
>>  drivers/misc/Kconfig     |   10 ++
>>  drivers/misc/Makefile    |    1 +
>>  drivers/misc/bh1780gli.c |  273 ++++++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 284 insertions(+), 0 deletions(-)
>>  create mode 100644 drivers/misc/bh1780gli.c
>>
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index 0d0d625..3f5bf0f 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -278,6 +278,16 @@ config SENSORS_TSL2550
>>  	  This driver can also be built as a module.  If so, the module
>>  	  will be called tsl2550.
>>
>> +config SENSORS_BH1780
>> +	tristate "ROHM BH1780GLI ambient light sensor"
>> +	depends on I2C && SYSFS
>> +	help
>> +	  If you say yes here you get support for the ROHM BH1780GLI
>> +	  ambient light sensor.
>> +
>> +	  This driver can also be built as a module.  If so, the module
>> +	  will be called bh1780gli.
>> +
>>  config EP93XX_PWM
>>  	tristate "EP93xx PWM support"
>>  	depends on ARCH_EP93XX
>> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
>> index 7b6f7ee..c479d91 100644
>> --- a/drivers/misc/Makefile
>> +++ b/drivers/misc/Makefile
>> @@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
>>  obj-y				+= eeprom/
>>  obj-y				+= cb710/
>>  obj-$(CONFIG_VMWARE_BALLOON)	+= vmware_balloon.o
>> +obj-$(CONFIG_SENSORS_BH1780)	+= bh1780gli.o
>> diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
>> new file mode 100644
>> index 0000000..774531d
>> --- /dev/null
>> +++ b/drivers/misc/bh1780gli.c
>> @@ -0,0 +1,273 @@
>> +/*
>> + * bh1780gli.c
>> + * ROHM Ambient Light Sensor Driver
>> + *
>> + * Copyright (C) 2010 Texas Instruments
>> + * Author: Hemanth V <hemanthv@xxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/i2c.h>
>> +#include <linux/slab.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>> +
>> +#define BH1780_REG_CONTROL	0x80
>> +#define BH1780_REG_PARTID	0x8A
>> +#define BH1780_REG_MANFID	0x8B
>> +#define BH1780_REG_DLOW	0x8C
>> +#define BH1780_REG_DHIGH	0x8D
>> +
>> +#define BH1780_REVMASK		(0xf)
>> +#define BH1780_POWMASK		(0x3)
>> +#define BH1780_POFF		(0x0)
>> +#define BH1780_PON		(0x3)
>> +
>> +/* power on settling time in ms */
>> +#define BH1780_PON_DELAY	2
>> +
>> +struct bh1780_data {
>> +	struct i2c_client *client;
>> +	int power_state;
>> +	/* lock for sysfs operations */
>> +	struct mutex lock;
>> +};
>> +
>> +static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg)
>> +{
>> +	int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
>> +	if (ret < 0)
>> +		dev_err(&ddata->client->dev,
>> +			"i2c_smbus_write_byte_data failed error %d\
>> +			Register (%s)\n", ret, msg);
>> +	return ret;
>> +}
>> +
>> +static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
>> +{
>> +	int ret = i2c_smbus_read_byte_data(ddata->client, reg);
>> +	if (ret < 0)
>> +		dev_err(&ddata->client->dev,
>> +			"i2c_smbus_read_byte_data failed error %d\
>> +			 Register (%s)\n", ret, msg);
>> +	return ret;
>> +}
>> +
>> +static ssize_t bh1780_show_lux(struct device *dev,
>> +				struct device_attribute *attr, char *buf)
>> +{
>> +	struct platform_device *pdev = to_platform_device(dev);
>> +	struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> +	int lsb, msb;
>> +
>> +	lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW");
>> +	if (lsb < 0)
>> +		return lsb;
>> +
>> +	msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH");
>> +	if (msb < 0)
>> +		return msb;
>> +
>> +	return sprintf(buf, "%d\n", (msb << 8) | lsb);
>> +}
>> +
>> +static ssize_t bh1780_show_power_state(struct device *dev,
>> +					struct device_attribute *attr,
>> +					char *buf)
>> +{
>> +	struct platform_device *pdev = to_platform_device(dev);
>> +	struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> +	int state;
>> +
>> +	state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
>> +	if (state < 0)
>> +		return state;
>> +
>> +	return sprintf(buf, "%d\n", state & BH1780_POWMASK);
>> +}
>> +
>> +static ssize_t bh1780_store_power_state(struct device *dev,
>> +					struct device_attribute *attr,
>> +					const char *buf, size_t count)
>> +{
>> +	struct platform_device *pdev = to_platform_device(dev);
>> +	struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> +	unsigned long val;
>> +	int error;
>> +
>> +	error = strict_strtoul(buf, 0, &val);
>> +	if (error)
>> +		return error;
>> +
>> +	if (val < BH1780_POFF || val > BH1780_PON)
>> +		return -EINVAL;
>> +
>> +	mutex_lock(&ddata->lock);
>> +
>> +	error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL");
>> +	if (error < 0) {
>> +		mutex_unlock(&ddata->lock);
>> +		return error;
>> +	}
>> +
>> +	msleep(BH1780_PON_DELAY);
>> +	ddata->power_state = val;
>> +	mutex_unlock(&ddata->lock);
>> +
>> +	return count;
>> +}
>> +
>> +static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL);
>> +
>> +static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
>> +		bh1780_show_power_state, bh1780_store_power_state);
>> +
>> +static struct attribute *bh1780_attributes[] = {
>> +	&dev_attr_power_state.attr,
>> +	&dev_attr_lux.attr,
>> +	NULL
>> +};
>> +
>> +static const struct attribute_group bh1780_attr_group = {
>> +	.attrs = bh1780_attributes,
>> +};
>> +
>> +static int __devinit bh1780_probe(struct i2c_client *client,
>> +						const struct i2c_device_id *id)
>> +{
>> +	int ret;
>> +	struct bh1780_data *ddata = NULL;
>> +	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
>> +
>> +	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
>> +		ret = -EIO;
>> +		goto err_op_failed;
>> +	}
>> +
>> +	ddata = kzalloc(sizeof(struct bh1780_data), GFP_KERNEL);
>> +	if (ddata == NULL) {
>> +		ret = -ENOMEM;
>> +		goto err_op_failed;
>> +	}
>> +
>> +	ddata->client = client;
>> +	i2c_set_clientdata(client, ddata);
>> +
>> +	ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID");
>> +	if (ret < 0)
>> +		goto err_op_failed;
>> +
>> +	dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n",
>> +			(ret & BH1780_REVMASK));
>> +
>> +	mutex_init(&ddata->lock);
>> +
>> +	ret = sysfs_create_group(&client->dev.kobj, &bh1780_attr_group);
>> +	if (ret)
>> +		goto err_op_failed;
>> +
>> +	return 0;
>> +
>> +err_op_failed:
>> +	kfree(ddata);
>> +	return ret;
>> +}
>> +
>> +static int __devexit bh1780_remove(struct i2c_client *client)
>> +{
>> +	struct bh1780_data *ddata;
>> +
>> +	ddata = i2c_get_clientdata(client);
>> +	sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
>> +	i2c_set_clientdata(client, NULL);
>> +	kfree(ddata);
>> +
>> +	return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
>> +{
>> +	struct bh1780_data *ddata;
>> +	int state, ret;
>> +
>> +	ddata = i2c_get_clientdata(client);
>> +	state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
>> +	if (state < 0)
>> +		return state;
>> +
>> +	ddata->power_state = state & BH1780_POWMASK;
>> +
>> +	ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF,
>> +				"CONTROL");
>> +
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return 0;
>> +}
>> +
>> +static int bh1780_resume(struct i2c_client *client)
>> +{
>> +	struct bh1780_data *ddata;
>> +	int state, ret;
>> +
>> +	ddata = i2c_get_clientdata(client);
>> +	state = ddata->power_state;
>> +
>> +	ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
>> +				"CONTROL");
>> +
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return 0;
>> +}
>> +#else
>> +#define bh1780_suspend NULL
>> +#define bh1780_resume NULL
>> +#endif /* CONFIG_PM */
>> +
>> +static const struct i2c_device_id bh1780_id[] = {
>> +	{ "bh1780", 0 },
>> +	{ },
>> +};
>> +
>> +static struct i2c_driver bh1780_driver = {
>> +	.probe		= bh1780_probe,
>> +	.remove		= bh1780_remove,
>> +	.id_table	= bh1780_id,
>> +	.suspend	= bh1780_suspend,
>> +	.resume		= bh1780_resume,
>> +	.driver = {
>> +		.name = "bh1780"
>> +	},
>> +};
>> +
>> +static int __init bh1780_init(void)
>> +{
>> +	return i2c_add_driver(&bh1780_driver);
>> +}
>> +
>> +static void __exit bh1780_exit(void)
>> +{
>> +	i2c_del_driver(&bh1780_driver);
>> +}
>> +
>> +module_init(bh1780_init)
>> +module_exit(bh1780_exit)
>> +
>> +MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Hemanth V <hemanthv@xxxxxx>");
>> --
>> 1.5.6.3
>>
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux