Adding a flag to determine the card detect type which can be
either GPIO or NON-GPIO.MMC1 Controller of OMAP4 have NON-GPIO
interrupt line from twl6030 for card detect.
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
---
arch/arm/mach-omap2/board-2430sdp.c | 2 ++
arch/arm/mach-omap2/board-3430sdp.c | 3 +++
arch/arm/mach-omap2/board-cm-t35.c | 3 +++
arch/arm/mach-omap2/board-devkit8000.c | 2 ++
arch/arm/mach-omap2/board-igep0020.c | 3 +++
arch/arm/mach-omap2/board-ldp.c | 2 ++
arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
arch/arm/mach-omap2/board-omap3evm.c | 2 ++
arch/arm/mach-omap2/board-omap3pandora.c | 4 ++++
arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++
arch/arm/mach-omap2/board-overo.c | 3 +++
arch/arm/mach-omap2/board-rx51-peripherals.c | 3 +++
arch/arm/mach-omap2/board-zoom-peripherals.c | 3 +++
arch/arm/mach-omap2/hsmmc.h | 1 +
arch/arm/plat-omap/include/plat/mmc.h | 4 ++++
15 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index a11a575..c7dec0e 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -37,6 +37,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
+#include <plat/mmc.h>
#include "hsmmc.h"
@@ -196,6 +197,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
.ext_clock = 1,
},
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index e7d629b..cfb20a0 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -40,6 +40,7 @@
#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
+#include <plat/mmc.h>
#include <mach/board-sdp.h>
@@ -356,11 +357,13 @@ static struct omap2_hsmmc_info mmc[] = {
* so the SIM card isn't used; else 4 bits.
*/
.wires = 8,
+ .cd_type = GPIO,
.gpio_wp = 4,
},
{
.mmc = 2,
.wires = 8,
+ .cd_type = GPIO,
.gpio_wp = 7,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e679a2c..89cfd1a 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -46,6 +46,7 @@
#include <plat/usb.h>
#include <plat/display.h>
#include <plat/mcspi.h>
+#include <plat/mmc.h>
#include <mach/hardware.h>
@@ -599,6 +600,7 @@ static struct omap2_hsmmc_info mmc[] = {
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
},
@@ -607,6 +609,7 @@ static struct omap2_hsmmc_info mmc[] = {
.wires = 4,
.transceiver = 1,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
.ocr_mask = 0x00100000, /* 3.3V */
},
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77022b5..114820f 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -45,6 +45,7 @@
#include <plat/usb.h>
#include <plat/timer-gp.h>
#include <plat/display.h>
+#include <plat/mmc.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -122,6 +123,7 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
+ .cd_type = GPIO,
.gpio_wp = 29,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d55c57b..3d5d506 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -30,6 +30,7 @@
#include <plat/usb.h>
#include <plat/display.h>
#include <plat/onenand.h>
+#include <plat/mmc.h>
#include "mux.h"
#include "hsmmc.h"
@@ -250,12 +251,14 @@ static struct omap2_hsmmc_info mmc[] = {
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 5fcb52e..efe3b1b 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -38,6 +38,7 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
+#include <plat/mmc.h>
#include <asm/delay.h>
#include <plat/control.h>
@@ -364,6 +365,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 962d377..d79adff 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -43,6 +43,7 @@
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/timer-gp.h>
+#include <plat/mmc.h>
#include "mux.h"
#include "hsmmc.h"
@@ -112,6 +113,7 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
+ .cd_type = GPIO,
.gpio_wp = 29,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index cfbe695..9d2f240 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -42,6 +42,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
#include <plat/display.h>
+#include <plat/mmc.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -372,6 +373,7 @@ static struct omap2_hsmmc_info mmc[] = {
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = 63,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 395d049..ba5043c 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -41,6 +41,7 @@
#include <plat/mcspi.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/mmc.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -232,6 +233,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = 126,
.ext_clock = 0,
},
@@ -239,6 +241,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
.mmc = 2,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = 127,
.ext_clock = 1,
.transceiver = true,
@@ -247,6 +250,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
.mmc = 3,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2504d41..e6cab4a 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -48,6 +48,7 @@
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/timer-gp.h>
+#include <plat/mmc.h>
#include "mux.h"
#include "hsmmc.h"
@@ -126,6 +127,7 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
+ .cd_type = GPIO,
.gpio_wp = 29,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 79ac414..a2d1e74 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -45,6 +45,7 @@
#include <mach/hardware.h>
#include <plat/nand.h>
#include <plat/usb.h>
+#include <plat/mmc.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -289,12 +290,14 @@ static struct omap2_hsmmc_info mmc[] = {
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.wires = 4,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
.transceiver = true,
.ocr_mask = 0x00100000, /* 3.3V */
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 966f5f8..c9c204a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -32,6 +32,7 @@
#include <plat/gpmc.h>
#include <plat/onenand.h>
#include <plat/gpmc-smc91x.h>
+#include <plat/mmc.h>
#include "mux.h"
#include "hsmmc.h"
@@ -256,6 +257,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.wires = 4,
.cover_only = true,
.gpio_cd = 160,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
.power_saving = true,
},
@@ -264,6 +266,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.mmc = 2,
.wires = 8, /* See also rx51_mmc2_remux */
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
.nonremovable = true,
.power_saving = true,
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6b39849..018a813 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -23,6 +23,7 @@
#include <plat/common.h>
#include <plat/usb.h>
+#include <plat/mmc.h>
#include "mux.h"
#include "hsmmc.h"
@@ -156,6 +157,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.name = "external",
.mmc = 1,
.wires = 4,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
.power_saving = true,
},
@@ -164,6 +166,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.mmc = 2,
.wires = 8,
.gpio_cd = -EINVAL,
+ .cd_type = GPIO,
.gpio_wp = -EINVAL,
.nonremovable = true,
.power_saving = true,
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 36f0ba8..10690b9 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -17,6 +17,7 @@ struct omap2_hsmmc_info {
bool no_off; /* power_saving and power is not to go off */
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
int gpio_cd; /* or -EINVAL */
+ bool cd_type; /* GPIO or NON_GPIO */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index c835f1e..ed60c0f 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -43,6 +43,9 @@
#define OMAP_MMC_MAX_SLOTS 2
+#define NON_GPIO 0
+#define GPIO 1
+
struct omap_mmc_platform_data {
/* back-link to device */
struct device *dev;
@@ -107,6 +110,7 @@ struct omap_mmc_platform_data {
unsigned features;
int switch_pin; /* gpio (card detect) */
+ unsigned cd_type:1; /* GPIO or NON_GPIO */
int gpio_wp; /* gpio (write protect) */
int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
