The following set of patches applies on top of master branch. http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git Patches verified on: omap3430-SDP, omap3630-sdp, zoom3 and beagle board And these are the patches required to address the following input - 1. The NAND driver needs to stop tinkering with the GPMC registers The omap General Purpose Memory Controller (GPMC) registers are omap specific, and not driver specific. Tinkering with these registers can cause issues with the other devices on the GPMC. 2. Passing hardcoded GPMC_CS0_BASE needs to go from the board files Passing hardcoded GPMC virtual addressess is sure way to mess up things. This should all become unnecessary once the NAND drivers stops messing with the GPMC registers directly. Sukumar Ghorai (3): omap3: GPMC register definition at common location omap3 nand: cleanup for not to use GPMC virtual address omap3 nand: fix issue in board file to detect the nand arch/arm/mach-omap2/board-cm-t35.c | 20 +---- arch/arm/mach-omap2/board-devkit8000.c | 25 +------ arch/arm/mach-omap2/board-omap3beagle.c | 24 +----- arch/arm/mach-omap2/board-omap3touchbook.c | 25 +------ arch/arm/mach-omap2/board-overo.c | 24 +----- arch/arm/mach-omap2/gpmc.c | 67 +++++----------- arch/arm/plat-omap/include/plat/gpmc.h | 41 ++++++++- arch/arm/plat-omap/include/plat/nand.h | 6 +- drivers/mtd/nand/omap2.c | 125 ++++++++++------------------ 9 files changed, 109 insertions(+), 248 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
