This patch adds the i2c board support for OMAP4430 SDP platform. The necessary drivers support patch is posted earlier. https://patchwork.kernel.org/patch/80659/ Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> Signed-off-by: Balaji T K <balajitk@xxxxxx> --- arch/arm/configs/omap_4430sdp_defconfig | 46 ++++++++++++++++++++++++++++++- arch/arm/mach-omap2/board-4430sdp.c | 14 +++++++++- arch/arm/plat-omap/i2c.c | 21 +++++++++++++- 3 files changed, 77 insertions(+), 4 deletions(-) diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index d87a349..a555305 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -490,14 +490,58 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set CONFIG_SPI_OMAP24XX=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # # PPS support diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 6cce6f2..41fed92 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -135,11 +135,23 @@ static struct omap_musb_board_data musb_board_data = { .mode = MUSB_PERIPHERAL, .power = 100, }; - +static int __init omap4_i2c_init(void) +{ + /* + * Phoenix Audio IC needs I2C1 to + * start with 400 KHz or less + */ + omap_register_i2c_bus(1, 400, NULL, 0); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(4, 400, NULL, 0); + return 0; +} static void __init omap_4430sdp_init(void) { int status; + omap4_i2c_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); /* OMAP4 SDP uses internal transceiver so register nop transceiver */ diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 624e262..87bc3f1 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -35,6 +35,7 @@ #define OMAP2_I2C_BASE1 0x48070000 #define OMAP2_I2C_BASE2 0x48072000 #define OMAP2_I2C_BASE3 0x48060000 +#define OMAP2_I2C_BASE4 0x48350000 static const char name[] = "i2c_omap"; @@ -54,9 +55,16 @@ static struct resource i2c_resources[][2] = { #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) }, #endif +#if defined(CONFIG_ARCH_OMAP4) + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, OMAP44XX_IRQ_I2C2) }, +#endif #if defined(CONFIG_ARCH_OMAP3) { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) }, #endif +#if defined(CONFIG_ARCH_OMAP4) + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, OMAP44XX_IRQ_I2C3) }, + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE4, OMAP44XX_IRQ_I2C4) }, +#endif }; #define I2C_DEV_BUILDER(bus_id, res, data) \ @@ -73,12 +81,15 @@ static struct resource i2c_resources[][2] = { static u32 i2c_rate[ARRAY_SIZE(i2c_resources)]; static struct platform_device omap_i2c_devices[] = { I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]), -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2PLUS) I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]), #endif -#if defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]), #endif +#if defined(CONFIG_ARCH_OMAP4) + I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_rate[3]), +#endif }; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) @@ -93,6 +104,8 @@ static int __init omap_i2c_nr_ports(void) ports = 2; else if (cpu_is_omap34xx()) ports = 3; + else if (cpu_is_omap44xx()) + ports = 4; return ports; } @@ -113,6 +126,10 @@ static int __init omap_i2c_add_bus(int bus_id) base = OMAP2_I2C_BASE1; irq = INT_24XX_I2C1_IRQ; } + if (cpu_is_omap44xx()) { + base = OMAP2_I2C_BASE1; + irq = OMAP44XX_IRQ_I2C1; + } res[0].start = base; res[0].end = base + OMAP_I2C_SIZE; res[1].start = irq; -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
