Tony, > > Enable network chip Micrel KS8851 for OMAP4430 SDP > > > > - Based on mainline version 2.6.34 rc7 > > - Tested in OMAP4430 SDP > > > > Throughput measurements using nuttcp application: > > 11.9375 MB / 10.06 sec = 9.9519 Mbps 92 %TX 0 %RX 0 retrans 7.87 msRTT > > > > -- > > > > All patches have been tagged as version 3 > > > > [PATCH v3 1/3] OMAP4: SPI: Fix Driver Kconfig > > [PATCH v3 2/3] OMAP4: Ethernet: KS8851 Board Support > > [PATCH v3 3/3] OMAP4: Networking: Defconfig Support > > > > -- > > > > arch/arm/configs/omap_4430sdp_defconfig | 57 +++++++++++++++++++++- > > arch/arm/mach-omap2/board-4430sdp.c | 82 > ++++++++++++++++++++++++++++++++ > > drivers/spi/Kconfig | 6 +- > > 3 files changed, 140 insertions(+), 5 deletions(-) > > I've applied all three into omap for-next branch. Thanks! Best Regards Abraham -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html