On Fri, 7 May 2010 18:18:31 +0300 Carlos Chinea wrote: > Adds HSI framework in to the linux kernel. > > High Speed Synchronous Serial Interface (HSI) is a > serial interface mainly used for connecting application > engines (APE) with cellular modem engines (CMT) in cellular > handsets. > > HSI provides multiplexing for up to 16 logical channels, > low-latency and full duplex communication. > > Signed-off-by: Carlos Chinea <carlos.chinea@xxxxxxxxx> > --- > drivers/Kconfig | 2 + > drivers/Makefile | 1 + > drivers/hsi/Kconfig | 13 ++ > drivers/hsi/Makefile | 4 + > drivers/hsi/hsi.c | 489 +++++++++++++++++++++++++++++++++++++++++++++++ > include/linux/hsi/hsi.h | 369 +++++++++++++++++++++++++++++++++++ > 6 files changed, 878 insertions(+), 0 deletions(-) > create mode 100644 drivers/hsi/Kconfig > create mode 100644 drivers/hsi/Makefile > create mode 100644 drivers/hsi/hsi.c > create mode 100644 include/linux/hsi/hsi.h > > diff --git a/drivers/Kconfig b/drivers/Kconfig > index a2b902f..4fe39f9 100644 > --- a/drivers/Kconfig > +++ b/drivers/Kconfig > @@ -50,6 +50,8 @@ source "drivers/i2c/Kconfig" > > source "drivers/spi/Kconfig" > > +source "drivers/hsi/Kconfig" > + > source "drivers/pps/Kconfig" > > source "drivers/gpio/Kconfig" > diff --git a/drivers/Makefile b/drivers/Makefile > index 2c4f277..24ca5bd 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -45,6 +45,7 @@ obj-$(CONFIG_SCSI) += scsi/ > obj-$(CONFIG_ATA) += ata/ > obj-$(CONFIG_MTD) += mtd/ > obj-$(CONFIG_SPI) += spi/ > +obj-$(CONFIG_HSI) += hsi/ > obj-y += net/ > obj-$(CONFIG_ATM) += atm/ > obj-$(CONFIG_FUSION) += message/ > diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig > new file mode 100644 > index 0000000..5af62ce > --- /dev/null > +++ b/drivers/hsi/Kconfig > @@ -0,0 +1,13 @@ > +# > +# HSI driver configuration > +# > +menuconfig HSI > + bool "HSI support" Why is this bool instead of tristate? IOW, why can it not be built as a loadable module? > + ---help--- > + The "High speed synchronous Serial Interface" is > + synchronous serial interface used mainly to connect > + application engines and cellular modems. > + > +if HSI > + > +endif # HSI > diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile > new file mode 100644 > index 0000000..b42b6cf > --- /dev/null > +++ b/drivers/hsi/Makefile > @@ -0,0 +1,4 @@ > +# > +# Makefile for HSI > +# > +obj-$(CONFIG_HSI) += hsi.o --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
