Hi,
2010/5/6 Kyungmin Park <kmpark@xxxxxxxxxxxxx>:
> Hi,
>
> What's your chip version? maybe some mis-probe it seems to be probed
> at 4KiB pagesize OneNAND.
Is a 4-Gbit DDP OneNAND device from Numonyx composed of two 2-Gbit 2KB
page dice stacked together, the device is equipped with two DataRAMs,
and two-plane NAND Flash memory array,
These two component enables simultaneous program of 4KiB (
CONFIG_MTD_ONENAND_2X_PROGRAM)
Cheers,
Enric
>
> Thank you,
> Kyungmin Park
>
> On Thu, May 6, 2010 at 8:22 PM, Enric Balletbò i Serra
> <eballetbo@xxxxxxxxx> wrote:
>> Hi,
>>
>> 2010/5/6 Kyungmin Park <kyungmin.park@xxxxxxxxxxx>:
>>> Hi,
>>>
>>> Can you add this statement at below the code?
>>> printk("%s[%d] page %d, %d, %d\n", __func__, __LINE__, page, (int)
>>> onenand_addr(this, block), ((int) addr >> this->page_shift) &
>>> this->page_mask);
>>
>> Yes,
>>
>> With this code nandtest fails:
>>
>> onenand_base.c
>>
>> 377: default:
>> block = onenand_block(this, addr);
>> /* (line disabled) page = (int) (addr >> this->page_shift); */
>> page = (int) (addr - onenand_addr(this, block)) >>
>> this->page_shift;
>>
>> printk("%s[%d] page %d, %d, %d\n", __func__, __LINE__,
>> page, (int)
>> onenand_addr(this, block), ((int) addr >>
>> this->page_shift) &
>> this->page_mask);
>>
>> if (ONENAND_IS_2PLANE(this)) {
>> /* Make the even block number */
>> block &= ~1;
>> /* Is it the odd plane? */
>> if (addr & this->writesize)
>> block++;
>> page >>= 1;
>> }
>> page &= this->page_mask;
>> break;
>>
>>
>> --- start log nandtest fail ---
>> # nandtest -l 262144 /dev/mtd3
>> ECC corrections: 0
>> ECC failures : 0
>> Bad blocks : 0
>> BBT blocks : 0
>> 00000000: writing...
>> [ 243.144287] onenand_command[382] page 0, 2621440, 0
>> [ 243.150787] onenand_command[382] page 2, 2621440, 2
>> [ 243.156158] onenand_command[382] page 4, 2621440, 4
>> (...)
>> [ 243.310729] onenand_command[382] page 60, 2621440, 60
>> [ 243.316223] onenand_command[382] page 62, 2621440, 62
>> [ 243.322204] onenand_command[382] page 0, 2752512, 0
>> [ 243.327636] onenand_command[382] page 2, 2752512, 2
>> [ 243.332977] onenand_command[382] page 4, 2752512, 4
>> (...)
>> [ 243.487487] onenand_command[382] page 60, 2752512, 60
>> [ 243.493041] onenand_command[382] page 62, 2752512, 62
>> 00000000: reading...
>> [ 243.498535] onenand_command[382] page 0, 2621440, 0
>> [ 243.505249] onenand_wait: ECC error = 0x8488
>> [ 243.509552] onenand_command[382] page 1, 2621440, 1
>> [ 243.514587] onenand_wait: ECC error = 0x8488
>> [ 243.518890] onenand_command[382] page 2, 2621440, 2
>> (...)
>> [ 244.089050] onenand_command[382] page 62, 2621440, 62
>> [ 244.094268] onenand_wait: ECC error = 0x8448
>> [ 244.098602] onenand_command[382] page 63, 2621440, 63
>> [ 244.103790] onenand_wait: ECC error = 0x8488
>> [ 244.109191] onenand_command[382] page 0, 2752512, 0
>> [ 244.114196] onenand_wait: ECC error = 0x8488
>> [ 244.118469] onenand_command[382] page 1, 2752512, 1
>> [ 244.123535] onenand_wait: ECC error = 0x8488
>> [ 244.127838] onenand_command[382] page 2, 2752512, 2
>> (...)
>> [ 244.698150] onenand_command[382] page 62, 2752512, 62
>> [ 244.703369] onenand_wait: ECC error = 0x8448
>> [ 244.707672] onenand_command[382] page 63, 2752512, 63
>> [ 244.712890] onenand_wait: ECC error = 0x8488
>>
>> ECC failed at 00000000
>> 00000000: checking...
>> compare failed. seed 1804289383
>> Byte 0x1 is 5a should be da
>> Byte 0x3 is 82 should be 92
>> Byte 0x4 is 10 should be 1a
>> Byte 0x5 is 21 should be b7
>>
>> --- end log nandtest fail ---
>>
>>
>> With this other code nandtest pass
>>
>> onenand_base.c
>>
>> 377: default:
>> block = onenand_block(this, addr);
>> page = (int) (addr >> this->page_shift);
>> /* (line disabled) page = (int) (addr - onenand_addr(this, block)) >>
>> this->page_shift; */
>>
>> printk("%s[%d] page %d, %d, %d\n", __func__, __LINE__,
>> page, (int)
>> onenand_addr(this, block), ((int) addr >>
>> this->page_shift) &
>> this->page_mask);
>>
>> if (ONENAND_IS_2PLANE(this)) {
>> /* Make the even block number */
>> block &= ~1;
>> /* Is it the odd plane? */
>> if (addr & this->writesize)
>> block++;
>> page >>= 1;
>> }
>> page &= this->page_mask;
>> break;
>>
>> --- start log nandtest pass ---
>> # nandtest -l 262144 /dev/mtd3
>> ECC corrections: 0
>> ECC failures : 33
>> Bad blocks : 0
>> BBT blocks : 0
>> 00000000: writing...
>> [ 2024.624664] onenand_command[382] page 1280, 2621440, 0
>> [ 2024.631530] onenand_command[382] page 1282, 2621440, 2
>> [ 2024.637145] onenand_command[382] page 1284, 2621440, 4
>> (...)
>> [ 2024.796813] onenand_command[382] page 1340, 2621440, 60
>> [ 2024.802520] onenand_command[382] page 1342, 2621440, 62
>> [ 2024.808593] onenand_command[382] page 1344, 2752512, 0
>> [ 2024.814239] onenand_command[382] page 1346, 2752512, 2
>> (...)
>> [ 2024.979644] onenand_command[382] page 1404, 2752512, 60
>> [ 2024.985351] onenand_command[382] page 1406, 2752512, 62
>> 00000000: reading...
>> [ 2024.990997] onenand_command[382] page 1280, 2621440, 0
>> [ 2024.997985] onenand_command[382] page 1281, 2621440, 1
>> [ 2025.003295] onenand_command[382] page 1282, 2621440, 2
>> (...)
>>
>> [ 2025.326782] onenand_command[382] page 1342, 2621440, 62
>> [ 2025.332214] onenand_command[382] page 1343, 2621440, 63
>> [ 2025.338592] onenand_command[382] page 1344, 2752512, 0
>> [ 2025.343811] onenand_command[382] page 1345, 2752512, 1
>> [ 2025.349151] onenand_command[382] page 1346, 2752512, 2
>> (...)
>> [ 2025.672576] onenand_command[382] page 1406, 2752512, 62
>> [ 2025.677978] onenand_command[382] page 1407, 2752512, 63
>> 00000000: checking...
>> Finished pass 1 successfully
>> --- end log nandtest pass ---
>>
>>>
>>> In my test environment, it displays the correct page number.
>>> (addr - onenand_addr(this, block) >> this->page_shift is same as
>>> '(addr >> this->page_shift) & this->page_mask'.
>>>
>>
>> Looks like page number is wrong ?
>>
>> Cheers,
>>
>> Enric
>>
>>> Thank you,
>>> Kyungmin Park
>>>
>>> On Fri, Apr 30, 2010 at 7:05 PM, Enric Balletbò i Serra
>>> <eballetbo@xxxxxxxxx> wrote:
>>>> Hello all,
>>>>
>>>> After commit 5988af2319781bc8e0ce418affec4e09cfa77907 (mtd:
>>>> Flex-OneNAND support) the onenand support for my device is broken.
>>>>
>>>> Before this commit when I run the nandtest program all is ok
>>>> ---
>>>> # nandtest /dev/mtd3
>>>> ECC corrections: 0
>>>> ECC failures : 0
>>>> Bad blocks : 0
>>>> BBT blocks : 0
>>>> 002c0000: checking...
>>>> Finished pass 1 successfully
>>>> --
>>>>
>>>> Introduced commit 5988af2319781bc8e0ce418affec4e09cfa7790 the nandtest
>>>> fails with:
>>>> ---
>>>> # nandtest /dev/mtd3
>>>> ECC corrections: 0
>>>> ECC failures : 0
>>>> Bad blocks : 0
>>>> BBT blocks : 0
>>>> 00000000: reading...
>>>> [ 299.092041] onenand_wait: ECC error = 0x8488
>>>> ( ... lots of ECC errors ... )
>>>> [ 299.092041] onenand_wait: ECC error = 0x8488
>>>> ECC failed at 00000000
>>>> 00000000: checking...
>>>> compare failed. seed 1804289383
>>>> Byte 0x1 is 5a should be da
>>>> Byte 0x3 is 82 should be 92
>>>> Byte 0x4 is 10 should be 1a
>>>> ( ... )
>>>> ---
>>>>
>>>> Investigating a little I see a significant difference introduced by
>>>> this patch. In line
>>>>
>>>> 347: page = (int) (addr - onenand_addr(this, block)) >>
>>>> this->page_shift; (patch applied)
>>>>
>>>> instead of
>>>>
>>>> 347: page = (int) (addr >> this->page_shift); (without patch)
>>>>
>>>> I applied commit 5988af2319781bc8e0ce418affec4e09cfa7790 and replaced
>>>> the line 347 and now works again. Fantastic, but I suspect this is not
>>>> the proper solution (probably this breaks other onenands devices, I
>>>> can't test).
>>>>
>>>> I'm just introducing in OneNAND devices so anyone can help me to
>>>> understand and solve the problem ? Note that my device is a Numonyx
>>>> 4-Gbit DDP (DUAL DIE PLAN) OneNAND flash memory ( 2 dice of 2Gb, 2KB
>>>> page )
>>>>
>>>> Thanks in advance,
>>>>
>>>> ///:~Enric
>>>>
>>>> ---
>>>> diff --git a/drivers/mtd/onenand/onenand_base.c
>>>> b/drivers/mtd/onenand/onenand_base.c
>>>> index 081f97d..b1d50a3 100644
>>>> --- a/drivers/mtd/onenand/onenand_base.c
>>>> +++ b/drivers/mtd/onenand/onenand_base.c
>>>> @@ -344,7 +344,7 @@ static int onenand_command(struct mtd_info *mtd,
>>>> int cmd, loff_t addr, size_t le
>>>>
>>>> default:
>>>> block = (int) onenand_block(this, addr);
>>>> - page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
>>>> + page = (int) (addr >> this->page_shift);
>>>>
>>>> if (ONENAND_IS_2PLANE(this)) {
>>>> /* Make the even block number */
>>>> ---
>>>>
>>>> ______________________________________________________
>>>> Linux MTD discussion mailing list
>>>> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>>>>
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
