* kishore kadiyala <kishore.kadiyala@xxxxxx> [100421 11:16]:
> This patch adds PBIAS Configuration during POWER ON and OFF.
> Also it adds MMC1 Card detect configuration on Phoenix
>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
> ---
> arch/arm/mach-omap2/hsmmc.c | 145 +++++++++++++++++++++++------
> arch/arm/plat-omap/include/plat/control.h | 17 ++++
> 2 files changed, 134 insertions(+), 28 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
> index ca3d4c9..7653434 100644
> --- a/arch/arm/mach-omap2/hsmmc.c
> +++ b/arch/arm/mach-omap2/hsmmc.c
> @@ -26,11 +26,18 @@
>
> static u16 control_pbias_offset;
> static u16 control_devconf1_offset;
> +static u16 control_mmc1;
>
> #define HSMMC_NAME_LEN 9
>
> /* Phoenix Registers */
> -#define TWL6030_MMCCTRL 0xEE
> +#define TWL6030_MMCCTRL 0xEE
> +#define VMMC_AUTO_OFF (0x1 << 3)
> +#define SW_FC (0x1 << 2)
> +
> +#define TWL6030_CFG_INPUT_PUPD3 0xF2
> +#define MMC_PU (0x1 << 3)
> +#define MMC_PD (0x1 << 2)
These defines need to go to twl code.
> static struct hsmmc_controller {
> struct omap_mmc_platform_data *mmc;
> @@ -120,27 +127,38 @@ static void hsmmc1_before_set_reg(struct device *dev, int slot,
> reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
> omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
> }
> + if (!cpu_is_omap44xx()) {
> + if (mmc->slots[0].internal_clock) {
> + reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
> + reg |= OMAP2_MMCSDIO1ADPCLKISEL;
> + omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
> + }
>
> - if (mmc->slots[0].internal_clock) {
> - reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
> - reg |= OMAP2_MMCSDIO1ADPCLKISEL;
> - omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
> - }
> -
> - reg = omap_ctrl_readl(control_pbias_offset);
> - if (cpu_is_omap3630()) {
> - /* Set MMC I/O to 52Mhz */
> - prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
> - prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
> - omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
> + reg = omap_ctrl_readl(control_pbias_offset);
> + if (cpu_is_omap3630()) {
> + /* Set MMC I/O to 52Mhz */
> + prog_io =
> + omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
> + prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
> + omap_ctrl_writel(prog_io,
> + OMAP343X_CONTROL_PROG_IO1);
> + } else {
> + reg |= OMAP2_PBIASSPEEDCTRL0;
> + }
> + reg &= ~OMAP2_PBIASLITEPWRDNZ0;
> } else {
> - reg |= OMAP2_PBIASSPEEDCTRL0;
> + reg = omap_ctrl_readl(control_pbias_offset);
> + reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ |
> + OMAP4_MMC1_PWRDNZ);
> }
> - reg &= ~OMAP2_PBIASLITEPWRDNZ0;
> omap_ctrl_writel(reg, control_pbias_offset);
> } else {
> reg = omap_ctrl_readl(control_pbias_offset);
> - reg &= ~OMAP2_PBIASLITEPWRDNZ0;
> + if (!cpu_is_omap44xx())
> + reg &= ~OMAP2_PBIASLITEPWRDNZ0;
> + else
> + reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ |
> + OMAP4_MMC1_PWRDNZ);
> omap_ctrl_writel(reg, control_pbias_offset);
> }
> }
> @@ -155,16 +173,36 @@ static void hsmmc1_after_set_reg(struct device *dev, int slot,
>
> if (power_on) {
> reg = omap_ctrl_readl(control_pbias_offset);
> - reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
> - if ((1 << vdd) <= MMC_VDD_165_195)
> - reg &= ~OMAP2_PBIASLITEVMODE0;
> + if (!cpu_is_omap44xx())
> + reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
> else
> - reg |= OMAP2_PBIASLITEVMODE0;
> + reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ;
> + if ((1 << vdd) <= MMC_VDD_165_195) {
> + if (!cpu_is_omap44xx()) {
> + reg &= ~OMAP2_PBIASLITEVMODE0;
> + } else {
> + reg &= ~OMAP4_MMC1_PBIASLITE_VMODE;
> + reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
> + OMAP4_MMC1_PWRDNZ);
> + }
> + } else {
> + if (!cpu_is_omap44xx())
> + reg |= OMAP2_PBIASLITEVMODE0;
> + else
> + reg |= (OMAP4_MMC1_PBIASLITE_VMODE |
> + OMAP4_MMC1_PBIASLITE_PWRDNZ |
> + OMAP4_MMC1_PWRDNZ);
> + }
> omap_ctrl_writel(reg, control_pbias_offset);
> } else {
> reg = omap_ctrl_readl(control_pbias_offset);
> - reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
> - OMAP2_PBIASLITEVMODE0);
> + if (!cpu_is_omap44xx())
> + reg |= (OMAP2_PBIASSPEEDCTRL0 |
> + OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASLITEVMODE0);
> + else
> + reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
> + OMAP4_MMC1_PBIASLITE_VMODE |
> + OMAP4_MMC1_PWRDNZ);
> omap_ctrl_writel(reg, control_pbias_offset);
> }
> }
This all should be set once during init. Please don't sprinkle
cpu_is_omapxxxx() tests all over the code. That makes the code
hard to maintain.
Instead, please just register the omap4 specific functions
once during init. If something cannot be currently defined
that way, making that change should be a separate patch
before adding the omap4 code.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
