[PATCH v5 2/5] omap3: pm: Using separate clk/volt setup_time for RET and OFF states

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch will use separate clk/volt setup_time for RET and OFF state,
also create separate copies of vc parameters for each Si in voltage.c.

Re-programing the setup time according to the target state of CORE power domain.
The voltsetup2 is used only when the device exits sys_off mode
(with PRM_VOLTCTRL[3]SEL_OFF set to 1).

Changed vdd0_/vdd1_ to vdd1_/vdd2_ in prcm vc setuptime structure.

Signed-off-by: Lesly A M <x0080970@xxxxxx>
Cc: Nishanth Menon <nm@xxxxxx> 
Cc: David Derrick <dderrick@xxxxxx>
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
---
 arch/arm/mach-omap2/board-3430sdp.c |   21 +----
 arch/arm/mach-omap2/board-3630sdp.c |    4 +-
 arch/arm/mach-omap2/board-zoom2.c   |    4 +-
 arch/arm/mach-omap2/board-zoom3.c   |    4 +-
 arch/arm/mach-omap2/pm.h            |   18 ----
 arch/arm/mach-omap2/pm34xx.c        |   26 +-----
 arch/arm/mach-omap2/voltage.c       |  157 ++++++++++++++++++++++++++--------
 arch/arm/mach-omap2/voltage.h       |   31 +++++++
 8 files changed, 165 insertions(+), 100 deletions(-)

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index e80f8d4..9cc8569 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -48,7 +48,6 @@
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "hsmmc.h"
-#include "pm.h"
 #include "voltage.h"
 #include "omap3-opp.h"
 #include "smartreflex-class3.h"
@@ -79,23 +78,6 @@ static struct cpuidle_params omap3_cpuidle_params_table[] = {
 	{1, 10000, 30000, 300000},
 };
 
-/* FIXME: These are not the optimal setup values to be used on 3430sdp*/
-static struct prm_setup_vc omap3_setuptime_table = {
-	.clksetup = 0xff,
-	.voltsetup_time1 = 0xfff,
-	.voltsetup_time2 = 0xfff,
-	.voltoffset = 0xff,
-	.voltsetup2 = 0xff,
-	.vdd0_on = 0x30,
-	.vdd0_onlp = 0x20,
-	.vdd0_ret = 0x1e,
-	.vdd0_off = 0x00,
-	.vdd1_on = 0x2c,
-	.vdd1_onlp = 0x20,
-	.vdd1_ret = 0x1e,
-	.vdd1_off = 0x00,
-};
-
 static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -348,7 +330,6 @@ static void __init omap_3430sdp_init_irq(void)
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	omap3_pm_init_opp_table();
 	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
-	omap_voltage_init_vc(&omap3_setuptime_table);
 	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
@@ -897,6 +878,8 @@ static struct omap_musb_board_data musb_board_data = {
 
 static void __init omap_3430sdp_init(void)
 {
+	omap_voltage_init_vc(NULL);
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 2fc1d0b..19ecd67 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -25,8 +25,8 @@
 
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
-#include "pm.h"
 #include "omap3-opp.h"
+#include "voltage.h"
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 
@@ -101,6 +101,8 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 static void __init omap_sdp_init(void)
 {
+	omap_voltage_init_vc(NULL);
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	omap_serial_init();
 	zoom_peripherals_init();
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 50924d4..20247f8 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -25,8 +25,8 @@
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "pm.h"
 #include "omap3-opp.h"
+#include "voltage.h"
 
 static void __init omap_zoom2_init_irq(void)
 {
@@ -82,6 +82,8 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 static void __init omap_zoom2_init(void)
 {
+	omap_voltage_init_vc(NULL);
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	zoom_peripherals_init();
 	zoom_debugboard_init();
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index a175ffe..d42e5d2 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -24,8 +24,8 @@
 
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
-#include "pm.h"
 #include "omap3-opp.h"
+#include "voltage.h"
 
 static void __init omap_zoom_map_io(void)
 {
@@ -70,6 +70,8 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 static void __init omap_zoom_init(void)
 {
+	omap_voltage_init_vc(NULL);
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
 	zoom_debugboard_init();
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 55bde0d..7e3726d 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -40,24 +40,6 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
 }
 #endif
 
-struct prm_setup_vc {
-	u16 clksetup;
-	u16 voltsetup_time1;
-	u16 voltsetup_time2;
-	u16 voltoffset;
-	u16 voltsetup2;
-/* PRM_VC_CMD_VAL_0 specific bits */
-	u16 vdd0_on;
-	u16 vdd0_onlp;
-	u16 vdd0_ret;
-	u16 vdd0_off;
-/* PRM_VC_CMD_VAL_1 specific bits */
-	u16 vdd1_on;
-	u16 vdd1_onlp;
-	u16 vdd1_ret;
-	u16 vdd1_off;
-};
-
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index f3994c0..b7a604e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -423,20 +423,12 @@ void omap_sram_idle(void)
 	if (core_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(0);
 		omap_uart_prepare_idle(1);
-		if (core_next_state == PWRDM_POWER_OFF) {
-			u32 voltctrl = OMAP3430_AUTO_OFF;
+		/* Update the voltsetup time for RET/OFF */
+		omap_voltage_vc_update(core_next_state);
 
-			if (voltage_off_while_idle)
-				voltctrl |= OMAP3430_SEL_OFF;
-			prm_set_mod_reg_bits(voltctrl,
-					     OMAP3430_GR_MOD,
-					     OMAP3_PRM_VOLTCTRL_OFFSET);
+		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_prcm_save_context();
-		} else if (core_next_state == PWRDM_POWER_RET) {
-			prm_set_mod_reg_bits(OMAP3430_AUTO_RET,
-						OMAP3430_GR_MOD,
-						OMAP3_PRM_VOLTCTRL_OFFSET);
 		}
 		/* Enable IO-PAD and IO-CHAIN wakeups */
 		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
@@ -496,18 +488,6 @@ void omap_sram_idle(void)
 		}
 		omap_uart_resume_idle(0);
 		omap_uart_resume_idle(1);
-		if (core_next_state == PWRDM_POWER_OFF) {
-			u32 voltctrl = OMAP3430_AUTO_OFF;
-
-			if (voltage_off_while_idle)
-				voltctrl |= OMAP3430_SEL_OFF;
-			prm_clear_mod_reg_bits(voltctrl,
-					       OMAP3430_GR_MOD,
-					       OMAP3_PRM_VOLTCTRL_OFFSET);
-		} else if (core_next_state == PWRDM_POWER_RET)
-			prm_clear_mod_reg_bits(OMAP3430_AUTO_RET,
-						OMAP3430_GR_MOD,
-						OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
 	omap3_intc_resume_idle();
 
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 11aeb69..bb80631 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -127,25 +127,70 @@ struct vc_reg_info {
 } vc_reg;
 
 /*
- * Default voltage controller settings for OMAP3
+ * Default voltage controller settings for OMAP3430
  */
-static struct prm_setup_vc vc_config = {
-	.clksetup = 0xff,
-	.voltsetup_time1 = 0xfff,
-	.voltsetup_time2 = 0xfff,
-	.voltoffset = 0xff,
-	.voltsetup2 = 0xff,
-	.vdd0_on = 0x30,        /* 1.2v */
-	.vdd0_onlp = 0x20,      /* 1.0v */
-	.vdd0_ret = 0x1e,       /* 0.975v */
-	.vdd0_off = 0x00,       /* 0.6v */
-	.vdd1_on = 0x2c,        /* 1.15v */
+struct __initdata prm_setup_vc omap3430_vc_config = {
+	/* CLK & VOLT SETUPTIME for RET */
+	.ret = {
+		.clksetup = 0x1,
+		.voltsetup1_vdd1 = 0x005B,
+		.voltsetup1_vdd2 = 0x0055,
+		.voltsetup2 = 0x0,
+		.voltoffset = 0x0,
+	},
+	/* CLK & VOLT SETUPTIME for OFF */
+	.off = {
+		.clksetup = 0x14A,
+		.voltsetup1_vdd1 = 0x00B3,
+		.voltsetup1_vdd2 = 0x00A0,
+		.voltsetup2 = 0x118,
+		.voltoffset = 0x32,
+	},
+	/* VC COMMAND VALUES for VDD1/VDD2 */
+	.vdd1_on = 0x30,        /* 1.2v */
 	.vdd1_onlp = 0x20,      /* 1.0v */
-	.vdd1_ret = 0x1e,       /* .975v */
+	.vdd1_ret = 0x1e,       /* 0.975v */
 	.vdd1_off = 0x00,       /* 0.6v */
+	.vdd2_on = 0x2c,        /* 1.15v */
+	.vdd2_onlp = 0x20,      /* 1.0v */
+	.vdd2_ret = 0x1e,       /* 0.975v */
+	.vdd2_off = 0x00,       /* 0.6v */
 };
 
 /*
+ * Default voltage controller settings for OMAP3630
+ */
+struct __initdata prm_setup_vc omap3630_vc_config = {
+	/* CLK & VOLT SETUPTIME for RET */
+	.ret = {
+		.clksetup = 0x1,
+		.voltsetup1_vdd1 = 0x005B,
+		.voltsetup1_vdd2 = 0x0055,
+		.voltsetup2 = 0x0,
+		.voltoffset = 0x0,
+	},
+	/* CLK & VOLT SETUPTIME for OFF */
+	.off = {
+		.clksetup = 0x14A,
+		.voltsetup1_vdd1 = 0x00B3,
+		.voltsetup1_vdd2 = 0x00A0,
+		.voltsetup2 = 0x118,
+		.voltoffset = 0x32,
+	},
+	/* VC COMMAND VALUES for VDD1/VDD2 */
+	.vdd1_on = 0x28,	/* 1.1v */
+	.vdd1_onlp = 0x20,	/* 1.0v */
+	.vdd1_ret = 0x13,	/* 0.83v */
+	.vdd1_off = 0x00,	/* 0.6v */
+	.vdd2_on = 0x2B,	/* 1.1375v */
+	.vdd2_onlp = 0x20,	/* 1.0v */
+	.vdd2_ret = 0x13,	/* 0.83v */
+	.vdd2_off = 0x00,	/* 0.6v */
+};
+
+static struct prm_setup_vc vc_config;
+
+/*
  * Structures containing OMAP3430 voltage supported and various data
  * associated with it per voltage domain basis. Smartreflex Ntarget
  * vales are left as 0 as they have to be populated by smartreflex
@@ -221,28 +266,28 @@ static void __init init_voltagecontroller(void)
 			VC_VOLRA0_SHIFT));
 
 	voltage_write_reg(vc_reg.cmdval0_reg,
-			(vc_config.vdd0_on << VC_CMD_ON_SHIFT) |
-			(vc_config.vdd0_onlp << VC_CMD_ONLP_SHIFT) |
-			(vc_config.vdd0_ret << VC_CMD_RET_SHIFT) |
-			(vc_config.vdd0_off << VC_CMD_OFF_SHIFT));
-
-	voltage_write_reg(vc_reg.cmdval1_reg,
 			(vc_config.vdd1_on << VC_CMD_ON_SHIFT) |
 			(vc_config.vdd1_onlp << VC_CMD_ONLP_SHIFT) |
 			(vc_config.vdd1_ret << VC_CMD_RET_SHIFT) |
 			(vc_config.vdd1_off << VC_CMD_OFF_SHIFT));
 
+	voltage_write_reg(vc_reg.cmdval1_reg,
+			(vc_config.vdd2_on << VC_CMD_ON_SHIFT) |
+			(vc_config.vdd2_onlp << VC_CMD_ONLP_SHIFT) |
+			(vc_config.vdd2_ret << VC_CMD_RET_SHIFT) |
+			(vc_config.vdd2_off << VC_CMD_OFF_SHIFT));
+
 	voltage_write_reg(vc_ch_conf_reg, VC_CMD1 | VC_RAV1);
 
 	voltage_write_reg(vc_i2c_cfg_reg, VC_MCODE_SHIFT | VC_HSEN);
 
 	/* Write setup times */
-	voltage_write_reg(prm_clksetup_reg, vc_config.clksetup);
+	voltage_write_reg(prm_clksetup_reg, vc_config.ret.clksetup);
 	voltage_write_reg(prm_voltsetup1_reg,
-			(vc_config.voltsetup_time2 << VC_SETUP_TIME2_SHIFT) |
-			(vc_config.voltsetup_time1 << VC_SETUP_TIME1_SHIFT));
-	voltage_write_reg(prm_voltoffset_reg, vc_config.voltoffset);
-	voltage_write_reg(prm_voltsetup2_reg, vc_config.voltsetup2);
+		(vc_config.ret.voltsetup1_vdd2 << VC_SETUP_TIME2_SHIFT) |
+		(vc_config.ret.voltsetup1_vdd1 << VC_SETUP_TIME1_SHIFT));
+	voltage_write_reg(prm_voltoffset_reg, vc_config.ret.voltoffset);
+	voltage_write_reg(prm_voltsetup2_reg, vc_config.ret.voltsetup2);
 }
 
 static void vp_latch_vsel(int vp_id)
@@ -833,22 +878,60 @@ void omap_change_voltscale_method(int voltscale_method)
  */
 void __init omap_voltage_init_vc(struct prm_setup_vc *setup_vc)
 {
+	if (cpu_is_omap3430())
+		memcpy(&vc_config, &omap3430_vc_config,
+				sizeof(struct prm_setup_vc));
+	else if (cpu_is_omap3630())
+		memcpy(&vc_config, &omap3630_vc_config,
+				sizeof(struct prm_setup_vc));
+
 	if (!setup_vc)
 		return;
 
-	vc_config.clksetup = setup_vc->clksetup;
-	vc_config.voltsetup_time1 = setup_vc->voltsetup_time1;
-	vc_config.voltsetup_time2 = setup_vc->voltsetup_time2;
-	vc_config.voltoffset = setup_vc->voltoffset;
-	vc_config.voltsetup2 = setup_vc->voltsetup2;
-	vc_config.vdd0_on = setup_vc->vdd0_on;
-	vc_config.vdd0_onlp = setup_vc->vdd0_onlp;
-	vc_config.vdd0_ret = setup_vc->vdd0_ret;
-	vc_config.vdd0_off = setup_vc->vdd0_off;
-	vc_config.vdd1_on = setup_vc->vdd1_on;
-	vc_config.vdd1_onlp = setup_vc->vdd1_onlp;
-	vc_config.vdd1_ret = setup_vc->vdd1_ret;
-	vc_config.vdd1_off = setup_vc->vdd1_off;
+	/* CLK SETUPTIME for RET & OFF */
+	vc_config.ret.clksetup = setup_vc->ret.clksetup;
+	vc_config.off.clksetup = setup_vc->off.clksetup;
+}
+
+void omap_voltage_vc_update(int core_next_state)
+{
+	u32 voltctrl = 0;
+
+	/* update voltsetup time */
+	if (core_next_state == PWRDM_POWER_OFF) {
+		voltctrl = OMAP3430_AUTO_OFF;
+		prm_write_mod_reg(vc_config.off.clksetup, OMAP3430_GR_MOD,
+				OMAP3_PRM_CLKSETUP_OFFSET);
+		prm_write_mod_reg((vc_config.off.voltsetup1_vdd2 <<
+				OMAP3430_SETUP_TIME2_SHIFT) |
+				(vc_config.off.voltsetup1_vdd1 <<
+				OMAP3430_SETUP_TIME1_SHIFT),
+				OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
+
+		if (voltage_off_while_idle) {
+			voltctrl |= OMAP3430_SEL_OFF;
+			prm_write_mod_reg(vc_config.off.voltsetup2,
+					OMAP3430_GR_MOD,
+					OMAP3_PRM_VOLTSETUP2_OFFSET);
+		}
+
+	} else if (core_next_state == PWRDM_POWER_RET) {
+		voltctrl = OMAP3430_AUTO_RET;
+		prm_write_mod_reg(vc_config.ret.clksetup, OMAP3430_GR_MOD,
+				OMAP3_PRM_CLKSETUP_OFFSET);
+		prm_write_mod_reg((vc_config.ret.voltsetup1_vdd2 <<
+				OMAP3430_SETUP_TIME2_SHIFT) |
+				(vc_config.ret.voltsetup1_vdd1 <<
+				OMAP3430_SETUP_TIME1_SHIFT),
+				OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
+
+		/* clear voltsetup2_reg if sys_off not enabled */
+		prm_write_mod_reg(vc_config.ret.voltsetup2, OMAP3430_GR_MOD,
+				OMAP3_PRM_VOLTSETUP2_OFFSET);
+	}
+
+	prm_set_mod_reg_bits(voltctrl, OMAP3430_GR_MOD,
+				OMAP3_PRM_VOLTCTRL_OFFSET);
 }
 
 /**
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 473a953..b0cf1db 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -8,12 +8,41 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+#ifndef __ARCH_ARM_MACH_OMAP3_VOLTAGE_H
+#define __ARCH_ARM_MACH_OMAP3_VOLTAGE_H
+
 #include "pm.h"
 
 /* VoltageDomain instances */
 #define VDD1	0
 #define VDD2	1
 
+struct setuptime_vc{
+	u16 clksetup;
+	u16 voltsetup1_vdd1;
+	u16 voltsetup1_vdd2;
+	u16 voltsetup2;
+	u16 voltoffset;
+};
+
+struct prm_setup_vc {
+/* CLK & VOLT SETUPTIME for RET */
+	struct setuptime_vc ret;
+/* CLK & VOLT SETUPTIME for OFF */
+	struct setuptime_vc off;
+/* PRM_VC_CMD_VAL_0 specific bits */
+	u16 vdd1_on;
+	u16 vdd1_onlp;
+	u16 vdd1_ret;
+	u16 vdd1_off;
+/* PRM_VC_CMD_VAL_1 specific bits */
+	u16 vdd2_on;
+	u16 vdd2_onlp;
+	u16 vdd2_ret;
+	u16 vdd2_off;
+};
+
 #define VOLTSCALE_VPFORCEUPDATE		1
 #define VOLTSCALE_VCBYPASS		2
 
@@ -87,6 +116,7 @@ struct omap_volt_data {
 void omap_voltageprocessor_enable(int vp_id);
 void omap_voltageprocessor_disable(int vp_id);
 void omap_voltage_init_vc(struct prm_setup_vc *setup_vc);
+void omap_voltage_vc_update(int core_next_state);
 void omap_voltage_init(void);
 int omap_voltage_scale(int vdd, unsigned long target_volt,
 					unsigned long current_volt);
@@ -97,3 +127,4 @@ int omap_match_volt(int vdd, unsigned long volt,
 				struct omap_volt_data *volt_data);
 unsigned long get_curr_vdd1_voltage(void);
 unsigned long get_curr_vdd2_voltage(void);
+#endif
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux