Re: [PATCHv3 1/3] TCA6416 keypad : Implement keypad driver for keys interfaced to TCA6416

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 23, 2010 at 08:40:33PM +0530, Sriramakrishnan wrote:
> This patch implements a simple Keypad driver that functions
> as an I2C client. It handles key press events for keys
> connected to TCA6416 I2C based IO expander.
> 
> Signed-off-by: Sriramakrishnan <srk@xxxxxx>
> ---
>  drivers/input/keyboard/Kconfig          |   16 ++
>  drivers/input/keyboard/Makefile         |    1 +
>  drivers/input/keyboard/tca6416-keypad.c |  354 +++++++++++++++++++++++++++++++
>  include/linux/tca6416_keypad.h          |   34 +++
>  4 files changed, 405 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/input/keyboard/tca6416-keypad.c
>  create mode 100644 include/linux/tca6416_keypad.h
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 64c1023..cf7fca9 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -192,6 +192,22 @@ config KEYBOARD_GPIO
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called gpio_keys.
>  
> +config KEYBOARD_TCA6416
> +	tristate "TCA6416 Keypad Support"
> +	depends on I2C
> +	help
> +	  This driver implements basic keypad functionality
> +	  for keys connected through TCA6416 IO expander
> +
> +	  Say Y here if your device has keys connected to
> +	  TCA6416 IO expander. Your board-specific setup logic
> +	  must also provide pin-mask details(of which TCA6416 pins
> +	  are used for keypad).
> +
> +	  If enabled the complete TCA6416 device will be managed through
> +	  this driver.
> +
> +
>  config KEYBOARD_MATRIX
>  	tristate "GPIO driven matrix keypad support"
>  	depends on GENERIC_GPIO
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 706c6b5..47e267c 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
>  obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
>  obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
>  obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
> +obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
>  obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
>  obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
>  obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
> diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
> new file mode 100644
> index 0000000..17df832
> --- /dev/null
> +++ b/drivers/input/keyboard/tca6416-keypad.c
> @@ -0,0 +1,354 @@
> +/*
> + * Driver for keys on TCA6416 I2C IO expander
> + *
> + * Copyright (C) 2010 Texas Instruments
> + *
> + * Author : Sriramakrishnan.A.G. <srk@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/gpio.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/tca6416_keypad.h>
> +#include <linux/workqueue.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +
> +#define TCA6416_INPUT          0
> +#define TCA6416_OUTPUT         1
> +#define TCA6416_INVERT         2
> +#define TCA6416_DIRECTION      3
> +
> +static const struct i2c_device_id tca6416_id[] = {
> +	{ "tca6416-keys", 16, },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, tca6416_id);
> +
> +struct tca6416_drv_data {
> +	struct input_dev *input;
> +	struct tca6416_button data[0];
> +};

No need for a separate structure.

> +
> +struct tca6416_keypad_chip {
> +	uint16_t reg_output;
> +	uint16_t reg_direction;
> +	uint16_t reg_input;
> +
> +	struct i2c_client *client;
> +	struct tca6416_drv_data  *drv_data;
> +	struct delayed_work dwork;
> +	uint16_t pinmask;

u16 in kernel is preferred.

> +	int irqnum;
> +	int use_polling;

boolean.

> +};
> +
> +static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg,
> +				uint16_t val)
> +{
> +	int ret;
> +
> +	ret = i2c_smbus_write_word_data(chip->client, reg << 1, val);
> +
> +	if (ret < 0) {
> +		dev_err(&chip->client->dev, "failed writing register\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg,
> +				uint16_t *val)
> +{
> +	int ret;
> +
> +	ret = i2c_smbus_read_word_data(chip->client, reg << 1);
> +
> +	if (ret < 0) {
> +		dev_err(&chip->client->dev, "failed reading register\n");
> +		return ret;
> +	}
> +
> +	*val = (uint16_t)ret;
> +	return 0;
> +}
> +
> +static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
> +{
> +	struct tca6416_keypad_chip *chip =
> +		(struct tca6416_keypad_chip *) dev_id;
> +
> +	disable_irq(irq);
> +	schedule_delayed_work(&chip->dwork, 0);
> +	return IRQ_HANDLED;
> +
> +}
> +
> +static void tca6416_keys_work_func(struct work_struct *workstruct)
> +{
> +	struct delayed_work *delay_work =
> +		container_of(workstruct, struct delayed_work, work);
> +	struct tca6416_keypad_chip *chip =
> +		container_of(delay_work, struct tca6416_keypad_chip, dwork);
> +	struct tca6416_drv_data *ddata = chip->drv_data;
> +	uint16_t reg_val, val;
> +	int ret, i, pin_index;
> +
> +	ret = tca6416_read_reg(chip, TCA6416_INPUT, &reg_val);
> +	if (ret)
> +		return;
> +
> +	reg_val &= chip->pinmask;
> +
> +	/* Figure out which lines have changed */
> +	val = reg_val ^ (chip->reg_input);
> +	chip->reg_input = reg_val;
> +
> +	for (i = 0, pin_index = 0; i < 16; i++) {
> +		if (val & (1 << i)) {
> +			struct tca6416_button *button = &ddata->data[pin_index];
> +			struct input_dev *input = ddata->input;
> +			unsigned int type = button->type ?: EV_KEY;
> +			int state = ((reg_val & (1 << i)) ? 1 : 0)
> +						^ button->active_low;
> +
> +			input_event(input, type, button->code, !!state);
> +			input_sync(input);
> +		}
> +
> +		if (chip->pinmask & (1 << i))
> +			pin_index++;
> +	}
> +
> +	if (chip->use_polling)
> +		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
> +	else
> +		enable_irq(chip->irqnum);
> +
> +}
> +
> +
> +static int __devinit tca6416_keypad_probe(struct i2c_client *client,
> +				   const struct i2c_device_id *id)
> +{
> +	struct tca6416_keys_platform_data *pdata;
> +	struct tca6416_keypad_chip *chip;
> +	struct tca6416_drv_data *ddata;
> +	struct input_dev *input;
> +	int i, ret, pin_index, err;
> +	uint16_t reg_val;
> +
> +	/* Check functionality */
> +	err = i2c_check_functionality(client->adapter,
> +			I2C_FUNC_SMBUS_BYTE);
> +	if (!err) {
> +		dev_err(&client->dev, "%s adapter not supported\n",
> +			dev_driver_string(&client->adapter->dev));
> +		return -ENODEV;
> +	}
> +
> +
> +	chip = kzalloc(sizeof(struct tca6416_keypad_chip), GFP_KERNEL);
> +	if (chip == NULL)
> +		return -ENOMEM;
> +
> +	pdata = client->dev.platform_data;
> +	if (pdata == NULL) {
> +		dev_dbg(&client->dev, "no platform data\n");
> +		ret = -EINVAL;
> +		goto fail1;
> +	}
> +
> +	chip->client = client;
> +	chip->pinmask = pdata->pinmask;
> +
> +	/* initialize cached registers from their original values.
> +	 * we can't share this chip with another i2c master.
> +	 */
> +	ret = tca6416_read_reg(chip, TCA6416_OUTPUT, &chip->reg_output);
> +	if (ret)
> +		goto fail1;
> +
> +	ret = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
> +	if (ret)
> +		goto fail1;
> +
> +	/* ensure that keypad pins are set to input */
> +	reg_val = chip->reg_direction | chip->pinmask;
> +	ret = tca6416_write_reg(chip, TCA6416_DIRECTION, reg_val);
> +	if (ret)
> +		goto fail1;
> +
> +	ret = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
> +	if (ret)
> +		goto fail1;
> +
> +	ret = tca6416_read_reg(chip, TCA6416_INPUT, &chip->reg_input);
> +	if (ret)
> +		goto fail1;
> +
> +	i2c_set_clientdata(client, chip);
> +
> +
> +	ddata = kzalloc(sizeof(struct tca6416_drv_data) +
> +			pdata->nbuttons * sizeof(struct tca6416_button),
> +			GFP_KERNEL);
> +	if (!ddata) {
> +		ret = -ENOMEM;
> +		goto fail1;
> +	}
> +
> +	input = input_allocate_device();
> +	if (!input) {
> +		dev_dbg(&client->dev, "failed to allocate state\n");
> +		ret = -ENOMEM;
> +		kfree(ddata);
> +		goto fail2;
> +	}
> +
> +	input->phys = "tca6416-keys/input0";
> +	input->name = client->name;
> +	input->dev.parent = &client->dev;
> +
> +	input->id.bustype = BUS_HOST;
> +	input->id.vendor = 0x0001;
> +	input->id.product = 0x0001;
> +	input->id.version = 0x0100;
> +
> +	/* Enable auto repeat feature of Linux input subsystem */
> +	if (pdata->rep)
> +		__set_bit(EV_REP, input->evbit);
> +
> +	ddata->input = input;
> +
> +	for (i = 0; i < pdata->nbuttons; i++) {
> +		unsigned int type;
> +
> +		ddata->data[i] = pdata->buttons[i];
> +		type = (pdata->buttons[i].type) ?: EV_KEY;
> +		input_set_capability(input, type, (pdata->buttons[i].code));
> +	}
> +
> +	chip->drv_data = ddata;
> +	chip->use_polling = pdata->use_polling;
> +
> +	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
> +
> +	if (!chip->use_polling) {
> +		if (pdata->irq_is_gpio)
> +			chip->irqnum = gpio_to_irq(client->irq);
> +		else
> +			chip->irqnum = client->irq;
> +
> +		ret = request_irq(chip->irqnum, tca6416_keys_isr,
> +				IRQF_SHARED | IRQF_TRIGGER_FALLING ,
> +				"tca6416-keypad", chip);
> +		if (ret) {
> +			dev_dbg(&client->dev,
> +				"Unable to claim irq %d; error %d\n",
> +				chip->irqnum, ret);
> +			goto fail3;
> +		}
> +		disable_irq(chip->irqnum);

If I unload the driver without anyone opening the device IRQ will be
left dosabled forever.

> +	}
> +
> +	ret = input_register_device(input);
> +	if (ret) {
> +		dev_dbg(&client->dev, "Unable to register input device, "
> +			"error: %d\n", ret);
> +		goto fail4;
> +	}
> +
> +	/* get current state of buttons */
> +
> +	ret = tca6416_read_reg(chip, TCA6416_INPUT, &reg_val);
> +	if (ret)
> +		goto fail5;
> +
> +	chip->reg_input = reg_val & chip->pinmask;
> +
> +	for (i = 0, pin_index = 0; i < 16; i++) {
> +		if (chip->pinmask & (1 << i)) {
> +			struct tca6416_button *button = &ddata->data[pin_index];
> +			unsigned int type = button->type ?: EV_KEY;
> +			int state = ((reg_val & (1 << i)) ? 1 : 0)
> +						^ button->active_low;
> +
> +			input_event(input, type, button->code, !!state);
> +			input_sync(input);
> +			pin_index++;
> +		}
> +	}

Duplicated code.

> +	input_sync(input);
> +
> +	if (chip->use_polling)
> +		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
> +	else
> +		enable_irq(chip->irqnum);
> +
> +	return 0;
> +
> +fail5:
> +	input_unregister_device(input);
> +fail4:
> +	if (!chip->use_polling)
> +		free_irq(chip->irqnum, chip);
> +fail3:
> +	input_free_device(input);
> +fail2:
> +	kfree(ddata);
> +fail1:
> +	kfree(chip);
> +	return ret;
> +}
> +
> +static int tca6416_keypad_remove(struct i2c_client *client)

__devexit

> +{
> +	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
> +	struct tca6416_drv_data *ddata = chip->drv_data;
> +	struct input_dev *input = ddata->input;
> +
> +	if (!chip->use_polling)
> +		free_irq(chip->irqnum, chip);
> +	cancel_delayed_work_sync(&chip->dwork);

This may leave IRQ disabled if you happen to really cancel the work.

> +	input_unregister_device(input);
> +	input_free_device(input);

input_free_device should not be called after unregister.

> +	kfree(ddata);
> +	kfree(chip);
> +	return 0;
> +}
> +
> +
> +static struct i2c_driver tca6416_keypad_driver = {
> +	.driver = {
> +		.name	= "tca6416-keypad",
> +	},
> +	.probe		= tca6416_keypad_probe,
> +	.remove		= tca6416_keypad_remove,

__devexit_p

> +	.id_table	= tca6416_id,
> +};
> +
> +static int __init tca6416_keypad_init(void)
> +{
> +	return i2c_add_driver(&tca6416_keypad_driver);
> +}
> +
> +subsys_initcall(tca6416_keypad_init);
> +
> +static void __exit tca6416_keypad_exit(void)
> +{
> +	i2c_del_driver(&tca6416_keypad_driver);
> +}
> +module_exit(tca6416_keypad_exit);
> +
> +MODULE_AUTHOR("Sriramakrishnan <srk@xxxxxx>");
> +MODULE_DESCRIPTION("Keypad driver over tca6146 IO expander");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/tca6416_keypad.h b/include/linux/tca6416_keypad.h
> new file mode 100644
> index 0000000..7bd266f
> --- /dev/null
> +++ b/include/linux/tca6416_keypad.h
> @@ -0,0 +1,34 @@
> +/*
> + * tca6416 keypad platform support
> + *
> + * Copyright (C) 2010 Texas Instruments
> + *
> + * Author: Sriramakrishnan <srk@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _TCA6416_KEYS_H
> +#define _TCA6416_KEYS_H
> +
> +#include <linux/types.h>
> +
> +struct tca6416_button {
> +	/* Configuration parameters */
> +	int code;		/* input event code (KEY_*, SW_*) */
> +	int active_low;

bool?

> +	int type;		/* input event type (EV_KEY, EV_SW) */

Wierd ordeting, make type, code, polarity.

> +};
> +
> +struct tca6416_keys_platform_data {
> +	struct tca6416_button *buttons;
> +	int nbuttons;
> +	unsigned int rep:1;	/* enable input subsystem auto repeat */

bool.

> +	uint16_t pinmask;
> +	uint16_t invert;

Does not seep to be used.

> +	int irq_is_gpio;

bool.

> +	int use_polling;	/* use polling if Interrupt is not connected*/

bool.

> +};
> +#endif

Does the driver still work if you aplly the patch below on top?

Thanks.

-- 
Dmitry

Input: tca6416 - misc fixes

Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---

 drivers/input/keyboard/tca6416-keypad.c |  327 +++++++++++++++----------------
 1 files changed, 160 insertions(+), 167 deletions(-)


diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 17df832..0943af3 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -10,16 +10,17 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/types.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/tca6416_keypad.h>
-#include <linux/workqueue.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
 
 #define TCA6416_INPUT          0
 #define TCA6416_OUTPUT         1
@@ -43,79 +44,63 @@ struct tca6416_keypad_chip {
 	uint16_t reg_input;
 
 	struct i2c_client *client;
-	struct tca6416_drv_data  *drv_data;
+	struct input_dev *input;
 	struct delayed_work dwork;
-	uint16_t pinmask;
+	u16 pinmask;
 	int irqnum;
-	int use_polling;
+	bool use_polling;
+	struct tca6416_button buttons[0];
 };
 
-static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg,
-				uint16_t val)
+static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val)
 {
-	int ret;
-
-	ret = i2c_smbus_write_word_data(chip->client, reg << 1, val);
-
-	if (ret < 0) {
-		dev_err(&chip->client->dev, "failed writing register\n");
-		return ret;
+	int error;
+
+	error = i2c_smbus_write_word_data(chip->client, reg << 1, val);
+	if (error < 0) {
+		dev_err(&chip->client->dev,
+			"%s failed, reg: %d, val: %d, error: %d\n",
+			__func__, reg, val, error);
+		return error;
 	}
 
 	return 0;
 }
 
-static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg,
-				uint16_t *val)
+static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
 {
-	int ret;
-
-	ret = i2c_smbus_read_word_data(chip->client, reg << 1);
+	int retval;
 
-	if (ret < 0) {
-		dev_err(&chip->client->dev, "failed reading register\n");
-		return ret;
+	retval = i2c_smbus_read_word_data(chip->client, reg << 1);
+	if (retval < 0) {
+		dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n",
+			__func__, reg, retval);
+		return retval;
 	}
 
-	*val = (uint16_t)ret;
+	*val = (u16)retval;
 	return 0;
 }
 
-static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
-{
-	struct tca6416_keypad_chip *chip =
-		(struct tca6416_keypad_chip *) dev_id;
-
-	disable_irq(irq);
-	schedule_delayed_work(&chip->dwork, 0);
-	return IRQ_HANDLED;
-
-}
-
-static void tca6416_keys_work_func(struct work_struct *workstruct)
+static void tca6416_keys_scan(struct tca6416_keypad_chip *chip)
 {
-	struct delayed_work *delay_work =
-		container_of(workstruct, struct delayed_work, work);
-	struct tca6416_keypad_chip *chip =
-		container_of(delay_work, struct tca6416_keypad_chip, dwork);
-	struct tca6416_drv_data *ddata = chip->drv_data;
-	uint16_t reg_val, val;
-	int ret, i, pin_index;
+	struct input_dev *input = chip->input;
+	u16 reg_val, val;
+	int error, i, pin_index;
 
-	ret = tca6416_read_reg(chip, TCA6416_INPUT, &reg_val);
-	if (ret)
+	error = tca6416_read_reg(chip, TCA6416_INPUT, &reg_val);
+	if (error)
 		return;
 
 	reg_val &= chip->pinmask;
 
 	/* Figure out which lines have changed */
-	val = reg_val ^ (chip->reg_input);
+	val = reg_val ^ chip->reg_input;
 	chip->reg_input = reg_val;
 
 	for (i = 0, pin_index = 0; i < 16; i++) {
 		if (val & (1 << i)) {
-			struct tca6416_button *button = &ddata->data[pin_index];
-			struct input_dev *input = ddata->input;
+			struct tca6416_button *button = &chip->buttons[pin_index];
 			unsigned int type = button->type ?: EV_KEY;
 			int state = ((reg_val & (1 << i)) ? 1 : 0)
 						^ button->active_low;
@@ -127,97 +112,128 @@ static void tca6416_keys_work_func(struct work_struct *workstruct)
 		if (chip->pinmask & (1 << i))
 			pin_index++;
 	}
+}
+
+/*
+ * This is threaded IRQ handler and this can (and will) sleep.
+ */
+static irqreturn_t tca6416_keys_isr(int irq, void *dev_id)
+{
+	struct tca6416_keypad_chip *chip = dev_id;
+
+	tca6416_keys_scan(chip);
+
+	return IRQ_HANDLED;
+}
+
+static void tca6416_keys_work_func(struct work_struct *work)
+{
+	struct tca6416_keypad_chip *chip =
+		container_of(work, struct tca6416_keypad_chip, dwork.work);
+
+	tca6416_keys_scan(chip);
+	schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
+}
+
+static int tca6416_keys_open(struct input_dev *dev)
+{
+	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
+
+	/* Get initial device state in case it has switches */
+	tca6416_keys_scan(chip);
 
 	if (chip->use_polling)
 		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
 	else
 		enable_irq(chip->irqnum);
 
+	return 0;
+}
+
+static void tca6416_keys_close(struct input_dev *dev)
+{
+	struct tca6416_keypad_chip *chip = input_get_drvdata(dev);
+
+	if (chip->use_polling)
+		cancel_delayed_work_sync(&chip->dwork);
+	else
+		free_irq(chip->irqnum, chip);
 }
 
+static int __devinit tca6416_setup_registers(struct tca6416_keypad_chip *chip)
+{
+	int error;
+
+	error = tca6416_read_reg(chip, TCA6416_OUTPUT, &chip->reg_output);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
+	if (error)
+		return error;
+
+	/* ensure that keypad pins are set to input */
+	error = tca6416_write_reg(chip, TCA6416_DIRECTION,
+				  chip->reg_direction | chip->pinmask);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
+	if (error)
+		return error;
+
+	error = tca6416_read_reg(chip, TCA6416_INPUT, &chip->reg_input);
+	if (error)
+		return error;
+
+	return 0;
+}
 
 static int __devinit tca6416_keypad_probe(struct i2c_client *client,
 				   const struct i2c_device_id *id)
 {
 	struct tca6416_keys_platform_data *pdata;
 	struct tca6416_keypad_chip *chip;
-	struct tca6416_drv_data *ddata;
 	struct input_dev *input;
-	int i, ret, pin_index, err;
-	uint16_t reg_val;
+	int error;
+	int i;
 
 	/* Check functionality */
-	err = i2c_check_functionality(client->adapter,
-			I2C_FUNC_SMBUS_BYTE);
-	if (!err) {
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
 		dev_err(&client->dev, "%s adapter not supported\n",
 			dev_driver_string(&client->adapter->dev));
 		return -ENODEV;
 	}
 
-
-	chip = kzalloc(sizeof(struct tca6416_keypad_chip), GFP_KERNEL);
-	if (chip == NULL)
-		return -ENOMEM;
-
 	pdata = client->dev.platform_data;
-	if (pdata == NULL) {
+	if (!pdata) {
 		dev_dbg(&client->dev, "no platform data\n");
-		ret = -EINVAL;
+		return -EINVAL;
+	}
+
+	chip = kzalloc(sizeof(struct tca6416_keypad_chip) +
+		       pdata->nbuttons * sizeof(struct tca6416_button),
+		       GFP_KERNEL);
+	input = input_allocate_device();
+	if (!chip || !input) {
+		error = -ENOMEM;
 		goto fail1;
 	}
 
 	chip->client = client;
+	chip->input = input;
 	chip->pinmask = pdata->pinmask;
+	chip->use_polling = pdata->use_polling;
 
-	/* initialize cached registers from their original values.
-	 * we can't share this chip with another i2c master.
-	 */
-	ret = tca6416_read_reg(chip, TCA6416_OUTPUT, &chip->reg_output);
-	if (ret)
-		goto fail1;
-
-	ret = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
-	if (ret)
-		goto fail1;
-
-	/* ensure that keypad pins are set to input */
-	reg_val = chip->reg_direction | chip->pinmask;
-	ret = tca6416_write_reg(chip, TCA6416_DIRECTION, reg_val);
-	if (ret)
-		goto fail1;
-
-	ret = tca6416_read_reg(chip, TCA6416_DIRECTION, &chip->reg_direction);
-	if (ret)
-		goto fail1;
-
-	ret = tca6416_read_reg(chip, TCA6416_INPUT, &chip->reg_input);
-	if (ret)
-		goto fail1;
-
-	i2c_set_clientdata(client, chip);
-
-
-	ddata = kzalloc(sizeof(struct tca6416_drv_data) +
-			pdata->nbuttons * sizeof(struct tca6416_button),
-			GFP_KERNEL);
-	if (!ddata) {
-		ret = -ENOMEM;
-		goto fail1;
-	}
-
-	input = input_allocate_device();
-	if (!input) {
-		dev_dbg(&client->dev, "failed to allocate state\n");
-		ret = -ENOMEM;
-		kfree(ddata);
-		goto fail2;
-	}
+	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
 
 	input->phys = "tca6416-keys/input0";
 	input->name = client->name;
 	input->dev.parent = &client->dev;
 
+	input->open = tca6416_keys_open;
+	input->close = tca6416_keys_close;
+
 	input->id.bustype = BUS_HOST;
 	input->id.vendor = 0x0001;
 	input->id.product = 0x0001;
@@ -227,20 +243,23 @@ static int __devinit tca6416_keypad_probe(struct i2c_client *client,
 	if (pdata->rep)
 		__set_bit(EV_REP, input->evbit);
 
-	ddata->input = input;
-
 	for (i = 0; i < pdata->nbuttons; i++) {
 		unsigned int type;
 
-		ddata->data[i] = pdata->buttons[i];
+		chip->buttons[i] = pdata->buttons[i];
 		type = (pdata->buttons[i].type) ?: EV_KEY;
-		input_set_capability(input, type, (pdata->buttons[i].code));
+		input_set_capability(input, type, pdata->buttons[i].code);
 	}
 
-	chip->drv_data = ddata;
-	chip->use_polling = pdata->use_polling;
+	input_set_drvdata(input, chip);
 
-	INIT_DELAYED_WORK(&chip->dwork, tca6416_keys_work_func);
+	/*
+	 * Initialize cached registers from their original values.
+	 * we can't share this chip with another i2c master.
+	 */
+	error = tca6416_setup_registers(chip);
+	if (error)
+		goto fail1;
 
 	if (!chip->use_polling) {
 		if (pdata->irq_is_gpio)
@@ -248,81 +267,55 @@ static int __devinit tca6416_keypad_probe(struct i2c_client *client,
 		else
 			chip->irqnum = client->irq;
 
-		ret = request_irq(chip->irqnum, tca6416_keys_isr,
-				IRQF_SHARED | IRQF_TRIGGER_FALLING ,
-				"tca6416-keypad", chip);
-		if (ret) {
+		error = request_threaded_irq(chip->irqnum, NULL,
+					     tca6416_keys_isr,
+					     IRQF_TRIGGER_FALLING,
+					     "tca6416-keypad", chip);
+		if (error) {
 			dev_dbg(&client->dev,
 				"Unable to claim irq %d; error %d\n",
-				chip->irqnum, ret);
-			goto fail3;
+				chip->irqnum, error);
+			goto fail1;
 		}
 		disable_irq(chip->irqnum);
 	}
 
-	ret = input_register_device(input);
-	if (ret) {
-		dev_dbg(&client->dev, "Unable to register input device, "
-			"error: %d\n", ret);
-		goto fail4;
-	}
-
-	/* get current state of buttons */
-
-	ret = tca6416_read_reg(chip, TCA6416_INPUT, &reg_val);
-	if (ret)
-		goto fail5;
-
-	chip->reg_input = reg_val & chip->pinmask;
-
-	for (i = 0, pin_index = 0; i < 16; i++) {
-		if (chip->pinmask & (1 << i)) {
-			struct tca6416_button *button = &ddata->data[pin_index];
-			unsigned int type = button->type ?: EV_KEY;
-			int state = ((reg_val & (1 << i)) ? 1 : 0)
-						^ button->active_low;
-
-			input_event(input, type, button->code, !!state);
-			input_sync(input);
-			pin_index++;
-		}
+	error = input_register_device(input);
+	if (error) {
+		dev_dbg(&client->dev,
+			"Unable to register input device, error: %d\n", error);
+		goto fail2;
 	}
-	input_sync(input);
 
-	if (chip->use_polling)
-		schedule_delayed_work(&chip->dwork, msecs_to_jiffies(100));
-	else
-		enable_irq(chip->irqnum);
+	i2c_set_clientdata(client, chip);
 
 	return 0;
 
-fail5:
-	input_unregister_device(input);
-fail4:
-	if (!chip->use_polling)
-		free_irq(chip->irqnum, chip);
-fail3:
-	input_free_device(input);
 fail2:
-	kfree(ddata);
+	if (!chip->use_polling) {
+		free_irq(chip->irqnum, chip);
+		enable_irq(chip->irqnum);
+	}
 fail1:
+	input_free_device(input);
 	kfree(chip);
-	return ret;
+	return error;
 }
 
-static int tca6416_keypad_remove(struct i2c_client *client)
+static int __devexit tca6416_keypad_remove(struct i2c_client *client)
 {
 	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
-	struct tca6416_drv_data *ddata = chip->drv_data;
-	struct input_dev *input = ddata->input;
 
-	if (!chip->use_polling)
+	if (!chip->use_polling) {
 		free_irq(chip->irqnum, chip);
-	cancel_delayed_work_sync(&chip->dwork);
-	input_unregister_device(input);
-	input_free_device(input);
-	kfree(ddata);
+		enable_irq(chip->irqnum);
+	}
+
+	input_unregister_device(chip->input);
 	kfree(chip);
+
+	i2c_set_clientdata(client, NULL);
+
 	return 0;
 }
 
@@ -332,7 +325,7 @@ static struct i2c_driver tca6416_keypad_driver = {
 		.name	= "tca6416-keypad",
 	},
 	.probe		= tca6416_keypad_probe,
-	.remove		= tca6416_keypad_remove,
+	.remove		= __devexit_p(tca6416_keypad_remove),
 	.id_table	= tca6416_id,
 };
 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux