> -----Original Message----- > From: Tomi Valkeinen [mailto:tomi.valkeinen@xxxxxxxxx] > Sent: Thursday, April 15, 2010 7:43 PM > To: Hiremath, Vaibhav > Cc: linux-omap@xxxxxxxxxxxxxxx > Subject: Re: [PATCH-RESEND 1/2] OMAP: LCD LS037V7DW01: Add Backlight driver > support > > Hi, > > On Thu, 2010-04-15 at 16:00 +0200, ext hvaibhav@xxxxxx wrote: > > From: Vaibhav Hiremath <hvaibhav@xxxxxx> > > > > Tested on OMAP3EVM for OMAP3530 and AM/DM 3730. > > > > This looks ok to me, I'll add it to my queue. > [Hiremath, Vaibhav] Thanks. Thanks, Vaibhav > Tomi > > > Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> > > --- > > .../video/omap2/displays/panel-sharp-ls037v7dw01.c | 77 > ++++++++++++++++++++ > > 1 files changed, 77 insertions(+), 0 deletions(-) > > > > diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c > b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c > > index 8d51a5e..d84feb0 100644 > > --- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c > > +++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c > > @@ -20,10 +20,16 @@ > > #include <linux/module.h> > > #include <linux/delay.h> > > #include <linux/device.h> > > +#include <linux/backlight.h> > > +#include <linux/fb.h> > > #include <linux/err.h> > > > > #include <plat/display.h> > > > > +struct sharp_data { > > + struct backlight_device *bl; > > +}; > > + > > static struct omap_video_timings sharp_ls_timings = { > > .x_res = 480, > > .y_res = 640, > > @@ -39,18 +45,89 @@ static struct omap_video_timings sharp_ls_timings = { > > .vbp = 1, > > }; > > > > +static int sharp_ls_bl_update_status(struct backlight_device *bl) > > +{ > > + struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev); > > + int level; > > + > > + if (!dssdev->set_backlight) > > + return -EINVAL; > > + > > + if (bl->props.fb_blank == FB_BLANK_UNBLANK && > > + bl->props.power == FB_BLANK_UNBLANK) > > + level = bl->props.brightness; > > + else > > + level = 0; > > + > > + return dssdev->set_backlight(dssdev, level); > > +} > > + > > +static int sharp_ls_bl_get_brightness(struct backlight_device *bl) > > +{ > > + if (bl->props.fb_blank == FB_BLANK_UNBLANK && > > + bl->props.power == FB_BLANK_UNBLANK) > > + return bl->props.brightness; > > + > > + return 0; > > +} > > + > > +static const struct backlight_ops sharp_ls_bl_ops = { > > + .get_brightness = sharp_ls_bl_get_brightness, > > + .update_status = sharp_ls_bl_update_status, > > +}; > > + > > + > > + > > static int sharp_ls_panel_probe(struct omap_dss_device *dssdev) > > { > > + struct backlight_properties props; > > + struct backlight_device *bl; > > + struct sharp_data *sd; > > + int r; > > + > > dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | > > OMAP_DSS_LCD_IHS; > > dssdev->panel.acb = 0x28; > > dssdev->panel.timings = sharp_ls_timings; > > > > + sd = kzalloc(sizeof(*sd), GFP_KERNEL); > > + if (!sd) > > + return -ENOMEM; > > + > > + dev_set_drvdata(&dssdev->dev, sd); > > + > > + memset(&props, 0, sizeof(struct backlight_properties)); > > + props.max_brightness = dssdev->max_backlight_level; > > + > > + bl = backlight_device_register("sharp-ls", &dssdev->dev, dssdev, > > + &sharp_ls_bl_ops, &props); > > + if (IS_ERR(bl)) { > > + r = PTR_ERR(bl); > > + kfree(sd); > > + return r; > > + } > > + sd->bl = bl; > > + > > + bl->props.fb_blank = FB_BLANK_UNBLANK; > > + bl->props.power = FB_BLANK_UNBLANK; > > + bl->props.brightness = dssdev->max_backlight_level; > > + r = sharp_ls_bl_update_status(bl); > > + if (r < 0) > > + dev_err(&dssdev->dev, "failed to set lcd brightness\n"); > > + > > return 0; > > } > > > > static void sharp_ls_panel_remove(struct omap_dss_device *dssdev) > > { > > + struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); > > + struct backlight_device *bl = sd->bl; > > + > > + bl->props.power = FB_BLANK_POWERDOWN; > > + sharp_ls_bl_update_status(bl); > > + backlight_device_unregister(bl); > > + > > + kfree(sd); > > } > > > > static int sharp_ls_power_on(struct omap_dss_device *dssdev) > > -- > > 1.6.2.4 > > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
