Tomi, Resending the patchset. Checkpatch was not complaining at my end. Probably the mail server is mangling the patches. I will send a tarball separately. The only change in this version is that i've put the Video memory initialization code in the board file. The TSC2005 stuff is still thereas without it panel is not detected. The merge conflict with TSC2005 patches if happens is very trivial to resolve. regards, -roger These patches get the N900 LCD panel working. Applys cleanly on 2.6.34-rc3 Changes since v2: -Added Video mem init in board file Changes since v1: -Added Backlight control Pre-requisites: https://patchwork.kernel.org/patch/86318/ https://patchwork.kernel.org/patch/86319/ https://patchwork.kernel.org/patch/86320/ --- Roger Quadros (5): OMAP: RX51: Add LCD Panel support OMAP: RX51: Add "vdds_sdi" supply voltage for SDI OMAP: RX51: Add Touch Controller in SPI board info OMAP: DSS2: Add ACX565AKM Panel Driver OMAP: RX51: Update board defconfig arch/arm/configs/rx51_defconfig | 39 ++- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-rx51-peripherals.c | 43 ++ arch/arm/mach-omap2/board-rx51-video.c | 107 +++ arch/arm/mach-omap2/board-rx51.c | 2 + drivers/video/omap2/displays/Kconfig | 6 + drivers/video/omap2/displays/Makefile | 1 + drivers/video/omap2/displays/panel-acx565akm.c | 819 ++++++++++++++++++++++++ 8 files changed, 1017 insertions(+), 1 deletions(-) create mode 100644 arch/arm/mach-omap2/board-rx51-video.c create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
