Hi Tomi, Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx> writes: > On Tue, 2010-04-06 at 22:41 +0200, ext Arnaud Ebalard wrote: > >> >> For the records, just in case someone wants to do the same, I had to >> use: >> >> /sbin/getty 115200 tty0 -n -l /bin/sh >> >> I also had to set CONFIG_KEYBOARD_TWL4030 to get the keyboard >> working. Any reason for that option not be enabled by default in >> rx51_defconfig? >> >> Additionally, after something like 25 seconds, the screen goes black and >> the device stops. Any clue? Can be panel realted? > > I'm guessing here, but it could be the HW watchdog kicking in if by > "device stops" you mean that serial etc also stops. Although it should > reboot, not stop... Well, it's a stock N900, not a development board so I don't have a serial; only the screen and the led in the left corner below the screen. By "device stops" I mean that the screen and the led (which was previously on) get dark and stay as is. I also suspected a HW watchdog but 25 seconds did not sound like it. I built a kernel without HW watchdog: same result. Any idea regarding how I could debug that? Cheers, a+ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
