Thomas Weber wrote: > Hi, > I tried to find some users but they are in holiday for a longer time or > didn't respond. > > I will try to explain the problem why I disabled the usb-port2. > The devkit8000 has only one mini-usb-port and one usb-host port like the > beagleboard. The usb2-port on the devkit8000 has some gpios attached for > mmc and touchscreen. Thatswhy the mmc was not working, when the usb-ehci > was enabled on this port. > > The beagleboard has also only one usb-host exposed, but there is no > other thing connected to the not exposed usb-port. Yup, I've been bitten by this before on other boards. Marking the wrong port as an EHCI port will result in 12 pads being put in the wrong mux-mode straight away, due to the padconf settings we do in usb-ehci.c. With 12-pads, there's a very high chance that you lose other functionality. The patch has my ack. Is there a link to the schematics somewhere, so the next time we see something like this, we can just use those as reference? - Anand -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
