> -----Original Message----- > From: Madhusudhan [mailto:madhu.cr@xxxxxx] > Sent: Wednesday, March 24, 2010 10:31 AM > To: 'Nishanth Menon'; 'Tony Lindgren' > Cc: 'Pais, Allen'; 'linux-arm-kernel@xxxxxxxxxxxxxxxxxxx'; 'linux- > omap@xxxxxxxxxxxxxxx'; 'Pandita, Vikram' > Subject: RE: mmc errors (was Re: [PATCH] arm: Fix DEBUG_LL for omap > zoom2/3) > > Hi Nishant, > > The eMMC on Zoom2 has an issue with respect to detection as a high > capacity card. This was discussed on the list with Pierre sometime back. I > don't have an acceptable solution to make this device work. Rather I > prefer to submit a patch which disables MMC2 on these boards. > > You can still use MMC1 to mount your file system. This is the card you can > plug in to the cage. > > Regards, > Madhu > > > -----Original Message----- > > From: Nishanth Menon [mailto:nm@xxxxxx] > > Sent: Tuesday, March 23, 2010 5:49 PM > > To: Tony Lindgren > > Cc: Pais, Allen; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux- > > omap@xxxxxxxxxxxxxxx; Pandita, Vikram; Madhusudhan Chikkature Rajashekar > > Subject: mmc errors (was Re: [PATCH] arm: Fix DEBUG_LL for omap zoom2/3) > > > > Tony Lindgren had written, on 03/23/2010 10:27 AM, the following: > > [...] > > > Then at least one issue remains for zoom3 to be usable.. > > > I'm getting tons of MMC errors trying to mount root on it: > > > > > > mmcblk1: error -110 transferring data, sector 2097024, nr 8, card > status > > 0x900 > > > end_request: I/O error, dev mmcblk1, sector 2097024 > > > ... > > > > > I have seen this on few platforms and seem to be related to eMMC usage. > > > > > Any ideas if that's fixed somewhere also? > > Madhu, any comments? > > > > -- > > Regards, > > Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
