* Scott Ellis <scott@xxxxxxxxxxxxxx> [100319 12:43]: > > Only 3430 and 3630 TRMs says 0xd, 0xe, 0xf = Division not supported. > > > I tested a 3503 with clock divider values of 0x0d, 0x0e and 0x0f. > It worked fine. > I collected data off the SPI bus successfully at the expected > frequencies of 5859 Hz, 2929 Hz and 1464 Hz. > > > But then again, the TRMs can have errors. > > > Looks like this is a case of that. OK, good thing you checked it :) > My patches #2 and #3 are unnecessary then and #4 makes use of a new > field added in #3. > > I can resubmit #4, "Use transfer speed_hz if provided". That was the > original problem I was working on. > > Should I leave the hard-coded 0x0f in the code or would you prefer a > named constant? Named constant in the long run, but a minimal fix is best for the -rc cycle. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
