Hi, This series contains fixes for omap2/3/4 serial code, and are fixing: - Avoid doing ioremap of a zero-based physical address. (causing a kernel panic during early init on 3630boards) - Unproper omap_revision check during uart globals setup. (omap_revision is not yet filled at that point) - Don't try to enable all uarts generically for zoom2/3 and 3630sdp. - Make zoom2/3 just register one serial port (ttyS0). This is a subset of the original series found here: [1] Thanks to: - Vikram Pandita - Paul Walmsley - Kevin Hilman - Manjunath Kondaiah - Felipe Balbi - Tony Lindgreen For all the feedback recieved so far. Regards, Sergio Detailed changelog: Sergio Aguirre (7): OMAP3: serial: Check for zero-based physical addr OMAP3: serial: Use dev_* macros instead of printk omap2/3/4: serial: Remove condition for getting uart4_phys omap3: zoom2/3 / 3630sdp: Don't init always all uarts omap3: 3630sdp: Explicitly enable all UARTs omap3: zoom 2/3: Change debugboard serial port id omap3: zoom2/3: Register only 1 8250 port arch/arm/configs/omap_zoom2_defconfig | 2 +- arch/arm/configs/omap_zoom3_defconfig | 2 +- arch/arm/mach-omap2/board-3630sdp.c | 1 + arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +- arch/arm/mach-omap2/board-zoom-peripherals.c | 1 - arch/arm/mach-omap2/serial.c | 35 +++++++++++++------------ 6 files changed, 22 insertions(+), 21 deletions(-) [1] http://marc.info/?l=linux-omap&m=126826639903105&w=2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
