> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Y, Kishore > Sent: Thursday, March 11, 2010 7:29 AM > To: Y, Kishore; Gadiyar, Anand; Tomi Valkeinen > Cc: linux-omap@xxxxxxxxxxxxxxx > Subject: RE: compile break on dss2 branch for zoom3 > > > -----Original Message----- > > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Y, Kishore > > Sent: Thursday, March 11, 2010 5:23 PM > > To: Gadiyar, Anand; Tomi Valkeinen > > Cc: linux-omap@xxxxxxxxxxxxxxx > > Subject: RE: compile break on dss2 branch for zoom3 > > > > > -----Original Message----- > > > From: Gadiyar, Anand > > > Sent: Thursday, March 11, 2010 5:18 PM > > > To: Tomi Valkeinen; Y, Kishore > > > Cc: linux-omap@xxxxxxxxxxxxxxx > > > Subject: RE: compile break on dss2 branch for zoom3 > > > > > > Tomi Valkeinen wrote: > > > > > > > > On Thu, 2010-03-11 at 12:40 +0100, ext Y, Kishore wrote: > > > > > Hi Tomi, > > > > > I am unable to compile dss2 tree for zoom3. Commit I am > using > > > following commit id > > > > > > > > > > 893d461b538e889da350061edaadeb8a9289913c > > > > > OMAP: DSS2: quick hack for set mode > > > > > > > > > > > > > > > Error I see is related to usb:- > > > > > drivers/usb/core/hcd.c: In function 'usb_hcd_resume_root_hub': > > > > > drivers/usb/core/hcd.c:1892: error: 'pm_wq' undeclared (first use > in > > > this function) > > > > > drivers/usb/core/hcd.c:1892: error: (Each undeclared identifier is > > > reported only once > > > > > drivers/usb/core/hcd.c:1892: error: for each function it appears > > in.) > > > > > make[3]: *** [drivers/usb/core/hcd.o] Error 1 > > > > > make[2]: *** [drivers/usb/core] Error 2 > > > > > make[1]: *** [drivers/usb] Error 2 > > > > > make: *** [drivers] Error 2 > > > > > > > > > > When I disable usb, build goes through but the board does not > bootup > > > with this image. It is stuck at uncompressing linux. > > > > > > > > Yes, mainstream linux tree seems to be broken. Not much I can do to > > help > > > > you there. You can try rebasing on top of later mainstrean version, > > > > perhaps it's been fixed there. > > > > > > > > > > I sent this patch [1] to linux-usb to fix this. It's yet to be queued > > up. > > > The alternative is to enable CONFIG_PM_RUNTIME in the build. > > > > > > Regards, > > > Anand > > > > > > [1] http://marc.info/?l=linux-usb&m=126675883221098&w=2 > > > > I will try this out. > I have tried to use the main line which already has this patch. I am able > to compile the code without any issues. But board still does not boot. Am > I missing something? > > My bootargs: > setenv bootargs console=ttyS3,115200n8 noinitrd root=/dev/nfs rw > nfsroot=192.168.223.72:/home/x0114913/fs1_inc2_rc0,nolock,rsize=1024,wsize > =1024 rootdelay=0 ip=192.168.223.251 debug Can you take this series: http://marc.info/?l=linux-omap&m=126826639903105&w=2 And test with ttyS0? Regards, Sergio > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
