This patch uses new formula to derive the dpll3 clock Stabilization
delay during DVFS for OMAP3630. The formula used is :
Latency = 2 * SYS_CLK + 10 * CLKOUTX2
Signed-off-by: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
Signed-off-by: Pramod Gurav <pramod.gurav@xxxxxx>
---
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 53 +++++++++++++++++++++++--------
1 files changed, 39 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 3f61eb2..eee0332 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -67,7 +67,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
u32 clk_sel_regval;
u32 core_dpll_mul_m, core_dpll_div_n, core_dpll_clkoutdiv_m2;
u32 sys_clk_rate, sdrc_clk_stab;
- u32 refclk, clkoutx2, switch_latency;
+ u32 refclk, clkoutx2, switch_latency, dpll_lock_freq;
unsigned int delay_sram;
if (!clk || !rate)
@@ -103,25 +103,50 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
sys_clk_rate = sys_clk_rate / CYCLES_PER_MHZ;
- /* wait time for L3 clk stabilization = 4*REFCLK + 8*CLKOUTX2 */
- refclk = (4 * (core_dpll_div_n + 1)) / sys_clk_rate;
- clkoutx2 = ((core_dpll_div_n + 1) * core_dpll_clkoutdiv_m2) /
+ if (cpu_is_omap3630()) {
+ /*
+ * wait time for L3 clk stabilization =
+ * 2*SYS_CLK + 10*CLKOUTX2
+ */
+ /* Avoid truncation of float values */
+ refclk = 2000 / sys_clk_rate;
+ dpll_lock_freq = (1000 * 100 * (core_dpll_div_n + 1))/
+ (2 * sys_clk_rate * core_dpll_mul_m);
+ clkoutx2 = 10 * (dpll_lock_freq * core_dpll_clkoutdiv_m2) / 100;
+ switch_latency = refclk + clkoutx2;
+
+ /* Adding 1000 nano seconds to sdrc clk stab */
+ sdrc_clk_stab = switch_latency + 1000;
+
+ delay_sram = delay_sram_val();
+ /*
+ * Calculate the number of MPU cycles to wait for
+ * SDRC to stabilize
+ */
+ _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+
+ c = ((sdrc_clk_stab * _mpurate) / (delay_sram * 2 * 1000));
+ } else {
+ /* wait time for L3 clk stabilization = 4*REFCLK + 8*CLKOUTX2*/
+ refclk = (4 * (core_dpll_div_n + 1)) / sys_clk_rate;
+ clkoutx2 = ((core_dpll_div_n + 1) * core_dpll_clkoutdiv_m2) /
(sys_clk_rate * core_dpll_mul_m * 2);
- switch_latency = refclk + 8 * clkoutx2;
+ switch_latency = refclk + 8 * clkoutx2;
- /* Adding 2us to sdrc clk stab */
- sdrc_clk_stab = switch_latency + 2;
+ /* Adding 2us to sdrc clk stab */
+ sdrc_clk_stab = switch_latency + 2;
- delay_sram = delay_sram_val();
+ delay_sram = delay_sram_val();
- /*
- * Calculate the number of MPU cycles
- * to wait for SDRC to stabilize
- */
+ /*
+ * Calculate the number of MPU cycles
+ * to wait for SDRC to stabilize
+ */
+ _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
- _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+ c = ((sdrc_clk_stab * _mpurate) / (delay_sram * 2));
- c = ((sdrc_clk_stab * _mpurate) / (delay_sram * 2));
+ }
pr_debug("m = %d, n = %d, m2 =%d\n", core_dpll_mul_m, core_dpll_div_n,
core_dpll_clkoutdiv_m2);
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
