From: Paul Walmsley <paul@xxxxxxxxx>
Split the OMAP1 and OMAP2+ platform_device build and register code.
Convert the OMAP2+ variant to use omap_device.
This patch was developed in collaboration with Rajendra Nayak
<rnayak@xxxxxx>.
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
---
arch/arm/mach-omap1/i2c.c | 103 +++++++++++++++++++++++
arch/arm/mach-omap2/i2c.c | 67 +++++++++++++++
arch/arm/plat-omap/i2c.c | 144 +++++++++++----------------------
arch/arm/plat-omap/include/plat/i2c.h | 24 ++++++
4 files changed, 240 insertions(+), 98 deletions(-)
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 1bf4735..7cff846 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -19,9 +19,112 @@
*
*/
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
#include <plat/i2c.h>
#include <plat/mux.h>
#include <plat/cpu.h>
+#include <plat/irqs.h>
+
+#include "mux.h"
+
+#define OMAP1_I2C_SIZE 0x3f
+#define OMAP1_I2C_BASE 0xfffb3800
+
+static const char name[] = "i2c_omap";
+
+#define OMAP1_I2C_RESOURCE_BUILDER(base, irq) \
+{
+ { \
+ .start = (base), \
+ .end = (base) + OMAP1_I2C_SIZE, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = (irq), \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+}
+
+static struct resource i2c_resources[][2] = {
+ { OMAP1_I2C_RESOURCE_BUILDER(OMAP1_I2C_BASE, INT_I2C) },
+};
+
+#define OMAP1_I2C_DEV_BUILDER(bus_id, res) \
+ { \
+ .id = (bus_id), \
+ .name = name, \
+ .num_resources = ARRAY_SIZE(res), \
+ .resource = (res), \
+ }
+
+static struct platform_device omap_i2c_devices[] = {
+ OMAP1_I2C_DEV_BUILDER(1, i2c_resources[0]),
+};
+
+#define I2C_ICLK 0
+#define I2C_FCLK 1
+static struct clk *omap_i2c_clks[ARRAY_SIZE(omap_i2c_devices)][2];
+
+static struct omap_i2c_dev_attr omap1_i2c_dev_attr;
+
+int __init omap1_i2c_nr_ports(void)
+{
+ return 1;
+}
+
+static int omap1_i2c_device_enable(struct platform_device *pdev)
+{
+ struct clk *c;
+ c = omap_i2c_clks[pdev->id - 1][I2C_ICLK];
+ if (c && !IS_ERR(c))
+ clk_enable(c);
+
+ c = omap_i2c_clks[pdev->id - 1][I2C_FCLK];
+ if (c && !IS_ERR(c))
+ clk_enable(c);
+
+ return 0;
+}
+
+static int omap1_i2c_device_idle(struct platform_device *pdev)
+{
+ struct clk *c;
+
+ c = omap_i2c_clks[pdev->id - 1][I2C_FCLK];
+ if (c && !IS_ERR(c))
+ clk_disable(c);
+
+ c = omap_i2c_clks[pdev->id - 1][I2C_ICLK];
+ if (c && !IS_ERR(c))
+ clk_disable(c);
+
+ return 0;
+}
+
+int __init omap1_i2c_add_bus(int bus_id)
+{
+ struct platform_device *pdev;
+ struct omap_i2c_platform_data *pdata;
+
+ pdev = &omap_i2c_devices[bus_id - 1];
+ pdata = omap_i2c_get_pdata(bus_id - 1);
+
+ /* idle and shutdown share the same code */
+ pdata->device_enable = omap1_i2c_device_enable;
+ pdata->device_idle = omap1_i2c_device_idle;
+ pdata->device_shutdown = omap1_i2c_device_idle;
+ pdata->dev_attr = &omap1_i2c_dev_attr;
+
+ omap_i2c_clks[bus_id - 1][I2C_ICLK] = clk_get(&pdev->dev, "ick");
+ omap_i2c_clks[bus_id - 1][I2C_FCLK] = clk_get(&pdev->dev, "fck");
+
+ return platform_device_register(pdev);
+}
int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 789ca8c..e773a25 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,12 +19,79 @@
*
*/
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+
#include <plat/cpu.h>
#include <plat/i2c.h>
+#include <plat/irqs.h>
#include <plat/mux.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
#include "mux.h"
+static const char name[] = "i2c_omap";
+
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
+
+int __init omap2_i2c_nr_ports(void)
+{
+ int ports = 0;
+
+ if (cpu_is_omap24xx())
+ ports = 2;
+ else if (cpu_is_omap34xx() || cpu_is_omap44xx())
+ ports = 3;
+
+ return ports;
+}
+
+static struct omap_device_pm_latency omap_i2c_latency[] = {
+ [0] = {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+int __init omap2_i2c_add_bus(int bus_id)
+{
+ struct omap_hwmod *oh;
+ struct omap_device *od;
+ char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+ int l, idx;
+ struct omap_i2c_platform_data *pdata;
+
+ idx = bus_id - 1;
+
+ l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN,
+ "i2c%d_hwmod", bus_id);
+ WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+ "String buffer overflow in I2C%d device setup\n", bus_id);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return -EEXIST;
+ }
+
+ pdata = omap_i2c_get_pdata(idx);
+ pdata->dev_attr = oh->dev_attr;
+ pdata->device_enable = omap_device_enable;
+ pdata->device_idle = omap_device_idle;
+ pdata->device_shutdown = omap_device_shutdown;
+
+ od = omap_device_build(name, bus_id, oh, pdata,
+ sizeof(struct omap_i2c_platform_data),
+ omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency));
+ WARN(IS_ERR(od), "Could not build omap_device for %s %s\n",
+ name, oh_name);
+
+ return PTR_ERR(od);
+}
+
int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len)
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 96d2781..7c1bb32 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -28,96 +28,20 @@
#include <linux/i2c.h>
#include <mach/irqs.h>
#include <plat/mux.h>
+#include <plat/i2c.h>
-#define OMAP_I2C_SIZE 0x3f
-#define OMAP1_I2C_BASE 0xfffb3800
-#define OMAP2_I2C_BASE1 0x48070000
-#define OMAP2_I2C_BASE2 0x48072000
-#define OMAP2_I2C_BASE3 0x48060000
-
-static const char name[] = "i2c_omap";
-
-#define I2C_RESOURCE_BUILDER(base, irq) \
- { \
- .start = (base), \
- .end = (base) + OMAP_I2C_SIZE, \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = (irq), \
- .flags = IORESOURCE_IRQ, \
- },
-
-static struct resource i2c_resources[][2] = {
- { I2C_RESOURCE_BUILDER(0, 0) },
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
-#endif
-#if defined(CONFIG_ARCH_OMAP3)
- { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
-#endif
-};
-
-#define I2C_DEV_BUILDER(bus_id, res, data) \
- { \
- .id = (bus_id), \
- .name = name, \
- .num_resources = ARRAY_SIZE(res), \
- .resource = (res), \
- .dev = { \
- .platform_data = (data), \
- }, \
- }
-
-static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
-static struct platform_device omap_i2c_devices[] = {
- I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
-#endif
-#if defined(CONFIG_ARCH_OMAP3)
- I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
-#endif
-};
+/*
+ * Indicates to the OMAP platform I2C init code that the rate was set
+ * from the kernel command line
+ */
+#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
+#define OMAP_I2C_MAX_CONTROLLERS 3
-#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
+static struct omap_i2c_platform_data omap_i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-static int __init omap_i2c_nr_ports(void)
+struct omap_i2c_platform_data * __init omap_i2c_get_pdata(int bus_id)
{
- int ports = 0;
-
- if (cpu_class_is_omap1())
- ports = 1;
- else if (cpu_is_omap24xx())
- ports = 2;
- else if (cpu_is_omap34xx())
- ports = 3;
-
- return ports;
-}
-
-static int __init omap_i2c_add_bus(int bus_id)
-{
- struct platform_device *pdev;
- struct resource *res;
- resource_size_t base, irq;
-
- pdev = &omap_i2c_devices[bus_id - 1];
- if (bus_id == 1) {
- res = pdev->resource;
- if (cpu_class_is_omap1()) {
- base = OMAP1_I2C_BASE;
- irq = INT_I2C;
- } else {
- base = OMAP2_I2C_BASE1;
- irq = INT_24XX_I2C1_IRQ;
- }
- res[0].start = base;
- res[0].end = base + OMAP_I2C_SIZE;
- res[1].start = irq;
- }
-
- return platform_device_register(pdev);
+ return &omap_i2c_pdata[bus_id];
}
/**
@@ -135,13 +59,23 @@ static int __init omap_i2c_bus_setup(char *str)
{
int ports;
int ints[3];
+ int rate;
+
+ if (cpu_class_is_omap1())
+ ports = omap1_i2c_nr_ports();
+ else if (cpu_class_is_omap2())
+ ports = omap2_i2c_nr_ports();
+ else
+ ports = 0;
- ports = omap_i2c_nr_ports();
get_options(str, 3, ints);
if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
return 0;
- i2c_rate[ints[1] - 1] = ints[2];
- i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
+
+ rate = ints[2];
+ rate |= OMAP_I2C_CMDLINE_SETUP;
+
+ omap_i2c_pdata[ints[1] - 1].rate = rate;
return 1;
}
@@ -155,10 +89,14 @@ static int __init omap_register_i2c_bus_cmdline(void)
{
int i, err = 0;
- for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
- if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
- i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
- err = omap_i2c_add_bus(i + 1);
+ for (i = 0; i < ARRAY_SIZE(omap_i2c_pdata); i++)
+ if (omap_i2c_pdata[i].rate & OMAP_I2C_CMDLINE_SETUP) {
+ omap_i2c_pdata[i].rate &= ~OMAP_I2C_CMDLINE_SETUP;
+ err = -EINVAL;
+ if (cpu_class_is_omap1())
+ err = omap1_i2c_add_bus(i + 1);
+ else if (cpu_class_is_omap2())
+ err = omap2_i2c_add_bus(i + 1);
if (err)
goto out;
}
@@ -182,8 +120,14 @@ int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
unsigned len)
{
int err;
+ int nr_ports = 0;
+
+ if (cpu_class_is_omap1())
+ nr_ports = omap1_i2c_nr_ports();
+ else if (cpu_class_is_omap2())
+ nr_ports = omap2_i2c_nr_ports();
- BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+ BUG_ON(bus_id < 1 || bus_id > nr_ports);
if (info) {
err = i2c_register_board_info(bus_id, info, len);
@@ -191,9 +135,13 @@ int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
return err;
}
- if (!i2c_rate[bus_id - 1])
- i2c_rate[bus_id - 1] = clkrate;
- i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
+ if (!omap_i2c_pdata[bus_id - 1].rate)
+ omap_i2c_pdata[bus_id - 1].rate = clkrate;
+ omap_i2c_pdata[bus_id - 1].rate &= ~OMAP_I2C_CMDLINE_SETUP;
+
+ if (cpu_class_is_omap1())
+ return omap1_i2c_add_bus(bus_id);
+ else if (cpu_class_is_omap2())
+ return omap2_i2c_add_bus(bus_id);
- return omap_i2c_add_bus(bus_id);
}
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 6520980..aeb72f8 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -20,6 +20,7 @@
*/
#include <linux/i2c.h>
+#include <linux/platform_device.h>
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
@@ -50,3 +51,26 @@ struct omap_i2c_dev_attr {
u8 fifo_depth;
u8 flags;
};
+
+/**
+ * struct omap_i2c_platform_data - OMAP I2C controller platform data
+ */
+struct omap_i2c_platform_data {
+ u32 rate;
+ struct omap_i2c_dev_attr *dev_attr;
+ void (*set_mpu_wkup_lat)(struct device *dev, int set);
+ int (*device_enable) (struct platform_device *pdev);
+ int (*device_shutdown) (struct platform_device *pdev);
+ int (*device_idle) (struct platform_device *pdev);
+};
+
+/* Prototypes for OMAP platform I2C core initialization code */
+
+struct omap_i2c_platform_data * __init omap_i2c_get_pdata(int bus_id);
+
+int __init omap1_i2c_nr_ports(void);
+int __init omap2_i2c_nr_ports(void);
+
+int __init omap1_i2c_add_bus(int bus_id);
+int __init omap2_i2c_add_bus(int bus_id);
+
--
1.5.4.7
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
