Re: [PATCH v2 1/3] OMAP: ZOOM: Introducing 'board-zoom-flash.c'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Vimal Singh <vimal.newwork@xxxxxxxxx> [100210 21:16]:
> From: Vimal Singh <vimalsingh@xxxxxx>
> 
> This patch adds 'board-zoom-flash.c', which could be utilized
> by boards similar to ZOOM2. (For ex: LDP, ZOOM2, ZOOM3).
> 
> This does initialization for NAND device based on the 'cs' number
> and partition information passed from board file (ex: board-zoom2.c).
> 
> Signed-off-by: Vimal Singh <vimalsingh@xxxxxx>
> ---
>  arch/arm/mach-omap2/board-zoom-flash.c        |   85 +++++++++++++++++++++++++
>  arch/arm/mach-omap2/include/mach/board-zoom.h |   11 +++
>  2 files changed, 96 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/board-zoom-flash.c
> 
> diff --git a/arch/arm/mach-omap2/board-zoom-flash.c
> b/arch/arm/mach-omap2/board-zoom-flash.c
> new file mode 100644
> index 0000000..f2328a4
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-zoom-flash.c
> @@ -0,0 +1,85 @@
> +/*
> + * board-zoom-flash.c
> + *
> + * Copyright (C) 2009 Texas Instruments Inc.
> + * Vimal Singh <vimalsingh@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +#include <linux/mtd/nand.h>
> +#include <linux/types.h>
> +#include <linux/io.h>
> +
> +#include <asm/mach/flash.h>
> +#include <plat/board.h>
> +#include <plat/gpmc.h>
> +#include <plat/nand.h>
> +
> +#include <mach/board-zoom.h>
> +
> +#if defined(CONFIG_MTD_NAND_OMAP2) || \
> +		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
> +
> +/* Note that all values in this struct are in nanoseconds */
> +static struct gpmc_timings nand_timings = {
> +
> +	.sync_clk = 0,
> +
> +	.cs_on = 0,
> +	.cs_rd_off = 36,
> +	.cs_wr_off = 36,
> +
> +	.adv_on = 6,
> +	.adv_rd_off = 24,
> +	.adv_wr_off = 36,
> +
> +	.we_off = 30,
> +	.oe_off = 48,
> +
> +	.access = 54,
> +	.rd_cycle = 72,
> +	.wr_cycle = 72,
> +
> +	.wr_access = 30,
> +	.wr_data_mux_bus = 0,
> +};
> +
> +/* NAND chip access: 16 bit */
> +static struct omap_nand_platform_data zoom_nand_data = {
> +	.nand_setup	= NULL,
> +	.gpmc_t		= &nand_timings,
> +	.dma_channel	= -1,	/* disable DMA in OMAP NAND driver */
> +	.dev_ready	= NULL,
> +	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
> +};
> +
> +/**
> + * zoom_flash_init - Identify devices connected to GPMC and register.
> + *
> + * @return - void.
> + */
> +void __init zoom_flash_init(struct flash_partitions zoom_nand_parts[], int cs)
> +{
> +	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
> +
> +	zoom_nand_data.cs		= cs;
> +	zoom_nand_data.parts		= zoom_nand_parts[0].parts;
> +	zoom_nand_data.nr_parts		= zoom_nand_parts[0].nr_parts;
> +	zoom_nand_data.gpmc_baseaddr	= (void *)(gpmc_base_add);
> +	zoom_nand_data.gpmc_cs_baseaddr	= (void *)(gpmc_base_add +
> +						GPMC_CS0_BASE +
> +						cs * GPMC_CS_SIZE);

The gpmc_baseaddr and gpmc_cs_baseaddr should no longer be
needed with gpmc-nand.c, right?

Tony

> +	gpmc_nand_init(&zoom_nand_data);
> +}
> +#else
> +void __init zoom_flash_init(struct flash_partitions zoom_nand_parts[], int cs)
> +{
> +}
> +#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
> +
> diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h
> b/arch/arm/mach-omap2/include/mach/board-zoom.h
> index c93b29e..f4469d3 100644
> --- a/arch/arm/mach-omap2/include/mach/board-zoom.h
> +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
> @@ -1,5 +1,16 @@
>  /*
>   * Defines for zoom boards
>   */
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +
> +struct flash_partitions {
> +	struct mtd_partition *parts;
> +	int nr_parts;
> +};
> +
> +#define ZOOM_NAND_CS	0
> +
> +extern void __init zoom_flash_init(struct flash_partitions [], int); >  extern int __init zoom_debugboard_init(void);
>  extern void __init zoom_peripherals_init(void);
> -- 
> 1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux