clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_ARCH_* options for those other
chip families; that will be done in a future patch, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Cc: Benoît Cousson <b-cousson@xxxxxx>
Cc: Rajendra Nayak <rnayak@xxxxxx>
Cc: Ranjith Lohithakshan <ranjithl@xxxxxx>
---
arch/arm/mach-omap2/Makefile | 36 ++--
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 1
arch/arm/mach-omap2/clock.c | 12 +
arch/arm/mach-omap2/clock.h | 2
arch/arm/mach-omap2/clock34xx.c | 260 --------------------------------
arch/arm/mach-omap2/clock34xx.h | 27 +--
arch/arm/mach-omap2/clock3517.c | 124 +++++++++++++++
arch/arm/mach-omap2/clock3517.h | 14 ++
arch/arm/mach-omap2/clock36xx.c | 72 +++++++++
arch/arm/mach-omap2/clock36xx.h | 13 ++
arch/arm/mach-omap2/clock3xxx.c | 145 ++++++++++++++++++
arch/arm/mach-omap2/clock3xxx.h | 21 +++
arch/arm/mach-omap2/clock3xxx_data.c | 16 +-
arch/arm/mach-omap2/clock44xx.c | 19 --
arch/arm/mach-omap2/clock44xx.h | 6 -
arch/arm/mach-omap2/clock44xx_data.c | 12 +
arch/arm/mach-omap2/io.c | 2
17 files changed, 450 insertions(+), 332 deletions(-)
create mode 100644 arch/arm/mach-omap2/clock3517.c
create mode 100644 arch/arm/mach-omap2/clock3517.h
create mode 100644 arch/arm/mach-omap2/clock36xx.c
create mode 100644 arch/arm/mach-omap2/clock36xx.h
create mode 100644 arch/arm/mach-omap2/clock3xxx.c
create mode 100644 arch/arm/mach-omap2/clock3xxx.h
rename arch/arm/mach-omap2/{clock34xx_data.c => clock3xxx_data.c} (99%)
delete mode 100644 arch/arm/mach-omap2/clock44xx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 10e6c6e..03058ad 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -7,22 +7,14 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
omap-2-3-common = irq.o sdrc.o omap_hwmod.o \
omap_hwmod_common_data.o
-omap-3-4-common = dpll3xxx.o
prcm-common = prcm.o powerdomain.o
clock-common = clock.o clock_common_data.o \
clockdomain.o clkt_dpll.o \
clkt_clksel.o
-clock-omap2xxx = clkt2xxx_dpllcore.o \
- clkt2xxx_virt_prcm_set.o \
- clkt2xxx_apll.o clkt2xxx_osc.o \
- clkt2xxx_sys.o
-clock-omap3xxx = clkt34xx_dpll3m2.o
-
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
- $(clock-omap2xxx)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
- $(omap-3-4-common) $(clock-omap3xxx)
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) $(prcm-common) $(clock-common)
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) $(prcm-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@@ -56,14 +48,24 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
+ clock2xxx_data.o clkt2xxx_sys.o \
+ clkt2xxx_dpllcore.o \
+ clkt2xxx_virt_prcm_set.o \
+ clkt2xxx_apll.o clkt2xxx_osc.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
+ clock34xx.o clkt34xx_dpll3m2.o \
+ clock3517.o clock36xx.o \
+ dpll3xxx.o clock3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
+ dpll3xxx.o
+
+# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o
obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o
-obj-$(CONFIG_ARCH_OMAP4) += clock44xx.o clock44xx_data.o
# EMU peripherals
-obj-$(CONFIG_OMAP3_EMU) += emu.o
+obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
@@ -118,7 +120,7 @@ obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
-obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
+obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
# Platform specific device init code
obj-y += usb-musb.o
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 8716a01..b2b1e37 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -26,6 +26,7 @@
#include <plat/sdrc.h>
#include "clock.h"
+#include "clock3xxx.h"
#include "clock34xx.h"
#include "sdrc.h"
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 9df5937..82b17ef 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -336,6 +336,18 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
return omap2_clksel_set_parent(clk, new_parent);
}
+/* OMAP3/4 non-CORE DPLL clkops */
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+ .enable = omap3_noncore_dpll_enable,
+ .disable = omap3_noncore_dpll_disable,
+};
+
+#endif
+
+
/*-------------------------------------------------------------------------
* Omap2 clock reset and init functions
*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index f7e7100..8b724bb 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -115,4 +115,6 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
#define omap2_clk_exit_cpufreq_table 0
#endif
+extern const struct clkops clkops_omap3_noncore_dpll_ops;
+
#endif
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index c8b4e56..6febd5f 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -8,7 +8,8 @@
* Jouni Högander
*
* Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,42 +18,16 @@
#undef DEBUG
#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/err.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
#include "clock.h"
#include "clock34xx.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST 120000000
-
-/*
- * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
- * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
- * at an offset of 4 from ICK enable bit.
- */
-#define AM35XX_IPSS_ICK_MASK 0xF
-#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
-#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
-#define AM35XX_IPSS_CLK_IDLEST_VAL 0
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
@@ -149,234 +124,3 @@ const struct clkops clkops_omap3430es2_hsotgusb_wait = {
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
-
-/**
- * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
- * from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
- *
- * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
- * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
- * valueafter their respective PWRDN bits are set. Any dummy write
- * (Any other value different from the Read value) to the
- * corresponding CM_CLKSEL register will refresh the dividers.
- */
-static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
-{
- u32 dummy_v, orig_v, clksel_shift;
- int ret;
-
- /* Clear PWRDN bit of HSDIVIDER */
- ret = omap2_dflt_clk_enable(clk);
-
- /* Restore the dividers */
- if (!ret) {
- clksel_shift = __ffs(clk->parent->clksel_mask);
- orig_v = __raw_readl(clk->parent->clksel_reg);
- dummy_v = orig_v;
-
- /* Write any other value different from the Read value */
- dummy_v ^= (1 << clksel_shift);
- __raw_writel(dummy_v, clk->parent->clksel_reg);
-
- /* Write the original divider */
- __raw_writel(orig_v, clk->parent->clksel_reg);
- }
-
- return ret;
-}
-
-const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
- .enable = omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
- .disable = omap2_dflt_clk_disable,
- .find_companion = omap2_clk_dflt_find_companion,
- .find_idlest = omap2_clk_dflt_find_idlest,
-};
-
-const struct clkops clkops_noncore_dpll_ops = {
- .enable = omap3_noncore_dpll_enable,
- .disable = omap3_noncore_dpll_disable,
-};
-
-/**
- * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The interface clocks on AM35xx IPSS reflects the clock idle status
- * in the enable register itsel at a bit offset of 4 from the enable
- * bit. A value of 1 indicates that clock is enabled.
- */
-static void am35xx_clk_find_idlest(struct clk *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = (__force void __iomem *)(clk->enable_reg);
- *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
- *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
-}
-
-/**
- * am35xx_clk_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as HECC) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
- u8 *other_bit)
-{
- *other_reg = (__force void __iomem *)(clk->enable_reg);
- if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
- *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
- else
- *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
-}
-
-const struct clkops clkops_am35xx_ipss_module_wait = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
- .find_idlest = am35xx_clk_find_idlest,
- .find_companion = am35xx_clk_find_companion,
-};
-
-/**
- * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The IPSS target CM_IDLEST bit is at a different shift from the
- * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
- * and @idlest_bit. No return value.
- */
-static void am35xx_clk_ipss_find_idlest(struct clk *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = AM35XX_ST_IPSS_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clkops clkops_am35xx_ipss_wait = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
- .find_idlest = am35xx_clk_ipss_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
-{
- /*
- * According to the 12-5 CDP code from TI, "Limitation 2.5"
- * on 3430ES1 prevents us from changing DPLL multipliers or dividers
- * on DPLL4.
- */
- if (omap_rev() == OMAP3430_REV_ES1_0) {
- printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
- "silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
- return omap3_noncore_dpll_set_rate(clk, rate);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
- struct clk *dpll5_clk;
- struct clk *dpll5_m2_clk;
-
- dpll5_clk = clk_get(NULL, "dpll5_ck");
- clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_enable(dpll5_clk);
-
- /* Enable autoidle to allow it to enter low power bypass */
- omap3_dpll_allow_idle(dpll5_clk);
-
- /* Program dpll5_m2_clk divider for no division */
- dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
- clk_enable(dpll5_m2_clk);
- clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
- clk_disable(dpll5_m2_clk);
- clk_disable(dpll5_clk);
- return;
-}
-
-/* Common clock code */
-
-/* REVISIT: Move this init stuff out into clock.c */
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
- struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
- unsigned long osc_sys_rate;
- bool err = 0;
-
- if (!cpu_is_omap34xx())
- return 0;
-
- if (!mpurate)
- return -EINVAL;
-
- /* XXX test these for success */
- dpll1_ck = clk_get(NULL, "dpll1_ck");
- if (WARN(IS_ERR(dpll1_ck), "Failed to get dpll1_ck.\n"))
- err = 1;
-
- arm_fck = clk_get(NULL, "arm_fck");
- if (WARN(IS_ERR(arm_fck), "Failed to get arm_fck.\n"))
- err = 1;
-
- core_ck = clk_get(NULL, "core_ck");
- if (WARN(IS_ERR(core_ck), "Failed to get core_ck.\n"))
- err = 1;
-
- osc_sys_ck = clk_get(NULL, "osc_sys_ck");
- if (WARN(IS_ERR(osc_sys_ck), "Failed to get osc_sys_ck.\n"))
- err = 1;
-
- if (err)
- return -ENOENT;
-
- /* REVISIT: not yet ready for 343x */
- if (clk_set_rate(dpll1_ck, mpurate))
- printk(KERN_ERR "*** Unable to set MPU rate\n");
-
- recalculate_root_clocks();
-
- osc_sys_rate = clk_get_rate(osc_sys_ck);
-
- pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (osc_sys_rate / 1000000),
- ((osc_sys_rate / 100000) % 10),
- (clk_get_rate(core_ck) / 1000000),
- (clk_get_rate(arm_fck) / 1000000));
-
- calibrate_delay();
-
- return 0;
-}
-arch_initcall(omap3xxx_clk_arch_init);
-
-
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index b9c65f5..628e8de 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,32 +1,15 @@
/*
- * OMAP3 clock function prototypes and macros
+ * OMAP34xx clock function prototypes and macros
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
*/
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-int omap3xxx_clk_init(void);
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
-void omap3_clk_lock_dpll5(void);
-
-extern struct clk *sdrc_ick_p;
-extern struct clk *arm_fck_p;
-
-/* OMAP34xx-specific clkops */
extern const struct clkops clkops_omap3430es2_ssi_wait;
extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_noncore_dpll_ops;
-
-/* AM35xx-specific clkops */
-extern const struct clkops clkops_am35xx_ipss_module_wait;
-extern const struct clkops clkops_am35xx_ipss_wait;
-
-/* OMAP36xx-specific clkops */
-extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
#endif
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
new file mode 100644
index 0000000..92f120b
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3517.c
@@ -0,0 +1,124 @@
+/*
+ * OMAP3517/3505-specific clock framework functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Ranjith Lohithakshan
+ * Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clockam35xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clkops clkops_am35xx_ipss_module_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clkops clkops_am35xx_ipss_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+
diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h
new file mode 100644
index 0000000..ca5e5a6
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3517.h
@@ -0,0 +1,14 @@
+/*
+ * OMAP3517/3505 clock function prototypes and macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
+
+extern const struct clkops clkops_am35xx_ipss_module_wait;
+extern const struct clkops clkops_am35xx_ipss_wait;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
new file mode 100644
index 0000000..0c5e25e
--- /dev/null
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -0,0 +1,72 @@
+/*
+ * OMAP36xx-specific clkops
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Mike Turquette
+ * Vijaykumar GN
+ * Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock36xx.h"
+
+
+/**
+ * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
+ * from HSDivider PWRDN problem Implements Errata ID: i556.
+ * @clk: DPLL output struct clk
+ *
+ * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
+ * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
+ * valueafter their respective PWRDN bits are set. Any dummy write
+ * (Any other value different from the Read value) to the
+ * corresponding CM_CLKSEL register will refresh the dividers.
+ */
+static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
+{
+ u32 dummy_v, orig_v, clksel_shift;
+ int ret;
+
+ /* Clear PWRDN bit of HSDIVIDER */
+ ret = omap2_dflt_clk_enable(clk);
+
+ /* Restore the dividers */
+ if (!ret) {
+ clksel_shift = __ffs(clk->parent->clksel_mask);
+ orig_v = __raw_readl(clk->parent->clksel_reg);
+ dummy_v = orig_v;
+
+ /* Write any other value different from the Read value */
+ dummy_v ^= (1 << clksel_shift);
+ __raw_writel(dummy_v, clk->parent->clksel_reg);
+
+ /* Write the original divider */
+ __raw_writel(orig_v, clk->parent->clksel_reg);
+ }
+
+ return ret;
+}
+
+const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
+ .enable = omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
+ .disable = omap2_dflt_clk_disable,
+ .find_companion = omap2_clk_dflt_find_companion,
+ .find_idlest = omap2_clk_dflt_find_idlest,
+};
diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h
new file mode 100644
index 0000000..a7dee5b
--- /dev/null
+++ b/arch/arm/mach-omap2/clock36xx.h
@@ -0,0 +1,13 @@
+/*
+ * OMAP36xx clock function prototypes and macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
+
+extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
new file mode 100644
index 0000000..d142457
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -0,0 +1,145 @@
+/*
+ * OMAP3-specific clock framework functions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock3xxx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
+/* needed by omap3_core_dpll_m2_set_rate() */
+struct clk *sdrc_ick_p, *arm_fck_p;
+
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (omap_rev() == OMAP3430_REV_ES1_0) {
+ pr_err("clock: DPLL4 cannot change rate due to "
+ "silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
+void __init omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_enable(dpll5_clk);
+
+ /* Enable autoidle to allow it to enter low power bypass */
+ omap3_dpll_allow_idle(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable(dpll5_m2_clk);
+ clk_disable(dpll5_clk);
+ return;
+}
+
+/* Common clock code */
+
+/* REVISIT: Move this init stuff out into clock.c */
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap3xxx_clk_arch_init(void)
+{
+ struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
+ unsigned long osc_sys_rate;
+ bool err = 0;
+
+ if (!cpu_is_omap34xx())
+ return 0;
+
+ if (!mpurate)
+ return -EINVAL;
+
+ /* XXX test these for success */
+ dpll1_ck = clk_get(NULL, "dpll1_ck");
+ if (WARN(IS_ERR(dpll1_ck), "Failed to get dpll1_ck.\n"))
+ err = 1;
+
+ arm_fck = clk_get(NULL, "arm_fck");
+ if (WARN(IS_ERR(arm_fck), "Failed to get arm_fck.\n"))
+ err = 1;
+
+ core_ck = clk_get(NULL, "core_ck");
+ if (WARN(IS_ERR(core_ck), "Failed to get core_ck.\n"))
+ err = 1;
+
+ osc_sys_ck = clk_get(NULL, "osc_sys_ck");
+ if (WARN(IS_ERR(osc_sys_ck), "Failed to get osc_sys_ck.\n"))
+ err = 1;
+
+ if (err)
+ return -ENOENT;
+
+ /* REVISIT: not yet ready for 343x */
+ if (clk_set_rate(dpll1_ck, mpurate))
+ printk(KERN_ERR "*** Unable to set MPU rate\n");
+
+ recalculate_root_clocks();
+
+ osc_sys_rate = clk_get_rate(osc_sys_ck);
+
+ pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
+ "%ld.%01ld/%ld/%ld MHz\n",
+ (osc_sys_rate / 1000000),
+ ((osc_sys_rate / 100000) % 10),
+ (clk_get_rate(core_ck) / 1000000),
+ (clk_get_rate(arm_fck) / 1000000));
+
+ calibrate_delay();
+
+ return 0;
+}
+arch_initcall(omap3xxx_clk_arch_init);
+
+
diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
new file mode 100644
index 0000000..8bbeeaf
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -0,0 +1,21 @@
+/*
+ * OMAP3-common clock function prototypes and macros
+ *
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
+
+int omap3xxx_clk_init(void);
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+void omap3_clk_lock_dpll5(void);
+
+extern struct clk *sdrc_ick_p;
+extern struct clk *arm_fck_p;
+
+extern const struct clkops clkops_noncore_dpll_ops;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
similarity index 99%
rename from arch/arm/mach-omap2/clock34xx_data.c
rename to arch/arm/mach-omap2/clock3xxx_data.c
index 950d6fc..6305ca9 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -24,7 +24,11 @@
#include <plat/clkdev_omap.h>
#include "clock.h"
+#include "clock3xxx.h"
#include "clock34xx.h"
+#include "clock36xx.h"
+#include "clockam35xx.h"
+
#include "cm.h"
#include "cm-regbits-34xx.h"
#include "prm.h"
@@ -374,7 +378,7 @@ static struct dpll_data dpll2_dd = {
static struct clk dpll2_ck = {
.name = "dpll2_ck",
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll2_dd,
.round_rate = &omap2_dpll_round_rate,
@@ -615,7 +619,7 @@ static struct dpll_data dpll4_dd_3630 __initdata = {
static struct clk dpll4_ck = {
.name = "dpll4_ck",
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll4_dd,
.round_rate = &omap2_dpll_round_rate,
@@ -1023,7 +1027,7 @@ static struct dpll_data dpll5_dd = {
static struct clk dpll5_ck = {
.name = "dpll5_ck",
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll5_dd,
.round_rate = &omap2_dpll_round_rate,
@@ -3567,10 +3571,12 @@ int __init omap3xxx_clk_init(void)
clk_init(&omap2_clk_functions);
- for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); c++)
+ for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
+ c++)
clk_preinit(c->lk.clk);
- for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); c++)
+ for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
+ c++)
if (c->cpu & cpu_clkflg) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c
deleted file mode 100644
index c238717..0000000
--- a/arch/arm/mach-omap2/clock44xx.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * OMAP4-specific clock framework functions
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Rajendra Nayak (rnayak@xxxxxx)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include "clock.h"
-
-const struct clkops clkops_noncore_dpll_ops = {
- .enable = &omap3_noncore_dpll_enable,
- .disable = &omap3_noncore_dpll_disable,
-};
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
index ed3b741..6be1095 100644
--- a/arch/arm/mach-omap2/clock44xx.h
+++ b/arch/arm/mach-omap2/clock44xx.h
@@ -5,8 +5,8 @@
* Copyright (C) 2010 Nokia Corporation
*/
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
/*
* XXX Missing values for the OMAP4 DPLL_USB
@@ -17,6 +17,4 @@
int omap4xxx_clk_init(void);
-extern const struct clkops clkops_noncore_dpll_ops;
-
#endif
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 70b314c..022f1a7 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -277,7 +277,7 @@ static struct clk dpll_abe_ck = {
.parent = &abe_dpll_refclk_mux_ck,
.dpll_data = &dpll_abe_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
@@ -644,7 +644,7 @@ static struct clk dpll_iva_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_iva_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
@@ -704,7 +704,7 @@ static struct clk dpll_mpu_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_mpu_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
@@ -776,7 +776,7 @@ static struct clk dpll_per_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_per_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
@@ -891,7 +891,7 @@ static struct clk dpll_unipro_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_unipro_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
@@ -947,7 +947,7 @@ static struct clk dpll_usb_ck = {
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_usb_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 01ef2ae..ad782e4 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -36,7 +36,7 @@
#include <plat/vram.h>
#include "clock2xxx.h"
-#include "clock34xx.h"
+#include "clock3xxx.h"
#include "clock44xx.h"
#include <plat/omap-pm.h>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
