> -----Original Message----- > From: Y, Kishore > Sent: Thursday, February 11, 2010 1:51 PM > To: Tomi Valkeinen > Cc: Hiremath, Vaibhav; Aguirre, Sergio; Christensen, Mikkel; linux- > omap@xxxxxxxxxxxxxxx > Subject: [PATCH V2] OMAP: DSS: Add NEC NL8048HL11-01B display panel > > From: Erik Gilling <konkers@xxxxxxxxxxx> > > NEC WVGA LCD NL8048HL11-01B support has been added. > > Signed-off-by: Mukund Mittal <mmittal@xxxxxx> > Signed-off-by: Kishore Y <kishore.y@xxxxxx> > --- > Changes from version 1: > incorporated cosmetic comments. > > drivers/video/omap2/displays/Kconfig | 6 + > drivers/video/omap2/displays/Makefile | 1 + > .../omap2/displays/panel-nec-NL8048HL11-01B.c | 284 > ++++++++++++++++++++ > 3 files changed, 291 insertions(+), 0 deletions(-) > create mode 100644 drivers/video/omap2/displays/panel-nec- > NL8048HL11-01B.c > > diff --git a/drivers/video/omap2/displays/Kconfig > b/drivers/video/omap2/displays/Kconfig > index dfb57ee..010ed48 100644 > --- a/drivers/video/omap2/displays/Kconfig > +++ b/drivers/video/omap2/displays/Kconfig > @@ -37,4 +37,10 @@ config PANEL_TPO_TD043MTEA1 > help > LCD Panel used in OMAP3 Pandora > > +config PANEL_NEC_NL8048HL11_01B > + tristate "NEC NL8048HL11-01B Panel" > + depends on OMAP2_DSS > + help > + LCD Panel from NEC. > + > endmenu > diff --git a/drivers/video/omap2/displays/Makefile > b/drivers/video/omap2/displays/Makefile > index e2bb321..9aace29 100644 > --- a/drivers/video/omap2/displays/Makefile > +++ b/drivers/video/omap2/displays/Makefile > @@ -5,3 +5,4 @@ obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel- > sharp-lq043t1dg01.o > obj-$(CONFIG_PANEL_TAAL) += panel-taal.o > obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o > obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o > +obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-NL8048HL11- > 01B.o [Hiremath, Vaibhav] I think you have submitted patch from your working directory and not linux-master. If I understand correctly we do not have these panels supported in linux-omap. Please rebase it with linux-omap and re-send. One small change mentioned below - > diff --git a/drivers/video/omap2/displays/panel-nec-NL8048HL11-01B.c > b/drivers/video/omap2/displays/panel-nec-NL8048HL11-01B.c > new file mode 100644 > index 0000000..4d7e8ab > --- /dev/null > +++ b/drivers/video/omap2/displays/panel-nec-NL8048HL11-01B.c > @@ -0,0 +1,284 @@ > +/* > + * NEC panel support > + * [Hiremath, Vaibhav] copy-right is missing. > + * This program is free software; you can redistribute it and/or > modify it > + * under the terms of the GNU General Public License version 2 as > published by > + * the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > but WITHOUT > + * ANY WARRANTY; without even the implied warranty of > MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > License for > + * more details. > + * > + * You should have received a copy of the GNU General Public > License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/module.h> > +#include <linux/delay.h> > +#include <linux/platform_device.h> > +#include <linux/spi/spi.h> [Hiremath, Vaibhav] you may want to add extra blank line here > +#include <asm/mach-types.h> [Hiremath, Vaibhav] ditto. > +#include <plat/gpio.h> > +#include <plat/mux.h> > +#include <plat/control.h> > +#include <plat/display.h> > + > +#define LCD_XRES 800 > +#define LCD_YRES 480 > +/* NEC PIX Clock Ratings > + * MINi:21.8MHz TYP:23.8MHz MAX:25.7MHz > + */ > +#define LCD_PIXEL_CLOCK 23800 > + > +/* NEC NL8048HL11-01B Manual > + * defines HFB, HSW, HBP, VFP, VSW, VBP as shown below > + */ > + > +static struct omap_video_timings nec_8048_panel_timings = { > + /* 800 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ > + .x_res = LCD_XRES, > + .y_res = LCD_YRES, > + .pixel_clock = LCD_PIXEL_CLOCK, > + .hfp = 6, > + .hsw = 1, > + .hbp = 4, > + .vfp = 3, > + .vsw = 1, > + .vbp = 4, > +}; > + > +static int nec_8048_panel_probe(struct omap_dss_device *dssdev) > +{ > + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | > + OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_RF | > + OMAP_DSS_LCD_ONOFF; > + dssdev->panel.timings = nec_8048_panel_timings; > + dssdev->panel.recommended_bpp = 16; > + > + return 0; > +} > + > +static void nec_8048_panel_remove(struct omap_dss_device *dssdev) > +{ > +} > + > +static int nec_8048_panel_enable(struct omap_dss_device *dssdev) > +{ > + int r = 0; > + > + /* Delay recommended by panel DATASHEET */ > + mdelay(4); > + if (dssdev->platform_enable) > + r = dssdev->platform_enable(dssdev); > + > + return r; > +} > + > +static void nec_8048_panel_disable(struct omap_dss_device *dssdev) > +{ > + if (dssdev->platform_disable) > + dssdev->platform_disable(dssdev); > + /* Delay recommended by panel DATASHEET */ > + mdelay(4); > +} > + > +static int nec_8048_panel_suspend(struct omap_dss_device *dssdev) > +{ > + nec_8048_panel_disable(dssdev); > + return 0; > +} > + > +static int nec_8048_panel_resume(struct omap_dss_device *dssdev) > +{ > + return nec_8048_panel_enable(dssdev); > +} > + > +static struct omap_dss_driver nec_8048_driver = { > + .probe = nec_8048_panel_probe, > + .remove = nec_8048_panel_remove, > + .enable = nec_8048_panel_enable, > + .disable = nec_8048_panel_disable, > + .suspend = nec_8048_panel_suspend, > + .resume = nec_8048_panel_resume, > + > + .driver = { > + .name = "NEC_8048_panel", > + .owner = THIS_MODULE, > + }, > +}; > + > +static int > +spi_send(struct spi_device *spi, unsigned char reg_addr, unsigned > char reg_data) > +{ > + int ret = 0; > + unsigned int cmd = 0; > + unsigned int data = 0; > + > + cmd = 0x0000 | reg_addr; /* register address write */ > + data = 0x0100 | reg_data ; /* register data write */ > + data = (cmd << 16) | data; > + ret = spi_write(spi, (unsigned char *)&data, 4); > + if (ret) { > + printk(KERN_ERR "error in spi_write %x\n", data); > + return ret; > + } > + > + /* Delay, part of init seqence recommended by panel DATASHEET > */ > + udelay(10); > + return 0; > +} > + > +static int init_nec_8048_wvga_lcd(struct spi_device *spi) > +{ > + /* Initialization Sequence */ > + /* spi_send(spi, REG, VAL) */ > + spi_send(spi, 3, 0x01); > + spi_send(spi, 0, 0x00); > + spi_send(spi, 1, 0x01); /* R1 = 0x01 (normal), 0x03 > (reversed) */ > + spi_send(spi, 4, 0x00); > + spi_send(spi, 5, 0x14); > + spi_send(spi, 6, 0x24); > + spi_send(spi, 16, 0xD7); > + spi_send(spi, 17, 0x00); > + spi_send(spi, 18, 0x00); > + spi_send(spi, 19, 0x55); > + spi_send(spi, 20, 0x01); > + spi_send(spi, 21, 0x70); > + spi_send(spi, 22, 0x1E); > + spi_send(spi, 23, 0x25); > + spi_send(spi, 24, 0x25); > + spi_send(spi, 25, 0x02); > + spi_send(spi, 26, 0x02); > + spi_send(spi, 27, 0xA0); > + spi_send(spi, 32, 0x2F); > + spi_send(spi, 33, 0x0F); > + spi_send(spi, 34, 0x0F); > + spi_send(spi, 35, 0x0F); > + spi_send(spi, 36, 0x0F); > + spi_send(spi, 37, 0x0F); > + spi_send(spi, 38, 0x0F); > + spi_send(spi, 39, 0x00); > + spi_send(spi, 40, 0x02); > + spi_send(spi, 41, 0x02); > + spi_send(spi, 42, 0x02); > + spi_send(spi, 43, 0x0F); > + spi_send(spi, 44, 0x0F); > + spi_send(spi, 45, 0x0F); > + spi_send(spi, 46, 0x0F); > + spi_send(spi, 47, 0x0F); > + spi_send(spi, 48, 0x0F); > + spi_send(spi, 49, 0x0F); > + spi_send(spi, 50, 0x00); > + spi_send(spi, 51, 0x02); > + spi_send(spi, 52, 0x02); > + spi_send(spi, 53, 0x02); > + spi_send(spi, 80, 0x0C); > + spi_send(spi, 83, 0x42); > + spi_send(spi, 84, 0x42); > + spi_send(spi, 85, 0x41); > + spi_send(spi, 86, 0x14); > + spi_send(spi, 89, 0x88); > + spi_send(spi, 90, 0x01); > + spi_send(spi, 91, 0x00); > + spi_send(spi, 92, 0x02); > + spi_send(spi, 93, 0x0C); > + spi_send(spi, 94, 0x1C); > + spi_send(spi, 95, 0x27); > + spi_send(spi, 98, 0x49); > + spi_send(spi, 99, 0x27); > + spi_send(spi, 102, 0x76); > + spi_send(spi, 103, 0x27); > + spi_send(spi, 112, 0x01); > + spi_send(spi, 113, 0x0E); > + spi_send(spi, 114, 0x02); > + spi_send(spi, 115, 0x0C); > + spi_send(spi, 118, 0x0C); > + spi_send(spi, 121, 0x30); /* R121 = 0x30 (normal), 0x10 > (reversed) */ > + spi_send(spi, 130, 0x00); > + spi_send(spi, 131, 0x00); > + spi_send(spi, 132, 0xFC); > + spi_send(spi, 134, 0x00); > + spi_send(spi, 136, 0x00); > + spi_send(spi, 138, 0x00); > + spi_send(spi, 139, 0x00); > + spi_send(spi, 140, 0x00); > + spi_send(spi, 141, 0xFC); > + spi_send(spi, 143, 0x00); > + spi_send(spi, 145, 0x00); > + spi_send(spi, 147, 0x00); > + spi_send(spi, 148, 0x00); > + spi_send(spi, 149, 0x00); > + spi_send(spi, 150, 0xFC); > + spi_send(spi, 152, 0x00); > + spi_send(spi, 154, 0x00); > + spi_send(spi, 156, 0x00); > + spi_send(spi, 157, 0x00); > + udelay(20); > + spi_send(spi, 2, 0x00); > + return 0; > +} > + > +static int nec_8048_spi_probe(struct spi_device *spi) > +{ > + spi->mode = SPI_MODE_0; > + spi->bits_per_word = 32; > + spi_setup(spi); > + > + init_nec_8048_wvga_lcd(spi); > + > + omap_dss_register_driver(&nec_8048_driver); [Hiremath, Vaibhav] Should be something return omap_dss_register_driver(&nec_8048_driver); Thanks, Vaibhav > + return 0; > +} > + > +static int nec_8048_spi_remove(struct spi_device *spi) > +{ > + omap_dss_unregister_driver(&nec_8048_driver); > + > + return 0; > +} > + > +static int nec_8048_spi_suspend(struct spi_device *spi, > pm_message_t mesg) > +{ > + spi_send(spi, 2, 0x01); > + mdelay(40); > + > + return 0; > +} > + > +static int nec_8048_spi_resume(struct spi_device *spi) > +{ > + /* reinitialize the panel */ > + spi_setup(spi); > + spi_send(spi, 2, 0x00); > + init_nec_8048_wvga_lcd(spi); > + > + return 0; > +} > + > +static struct spi_driver nec_8048_spi_driver = { > + .probe = nec_8048_spi_probe, > + .remove = __devexit_p(nec_8048_spi_remove), > + .suspend = nec_8048_spi_suspend, > + .resume = nec_8048_spi_resume, > + .driver = { > + .name = "nec_8048_spi", > + .bus = &spi_bus_type, > + .owner = THIS_MODULE, > + }, > +}; > + > +static int __init nec_8048_lcd_init(void) > +{ > + return spi_register_driver(&nec_8048_spi_driver); > +} > + > +static void __exit nec_8048_lcd_exit(void) > +{ > + return spi_unregister_driver(&nec_8048_spi_driver); > +} > + > +module_init(nec_8048_lcd_init); > +module_exit(nec_8048_lcd_exit); > +MODULE_LICENSE("GPL"); > + > -- > 1.5.6.3 > > Regards, > Kishore Y -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
