From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
There are several places where readw()/writew() functions are used instead of
OMAP_MCBSP_READ()/WRITE() macros for manipulating McBSP registers. Replace
them with macros to ensure consistent behaviour after caching is introduced.
Tested on OMAP1510 based Amstrad Delta.
Compile-tested with omap_3430sdp_defconfig.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
Acked-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
Acked-by: Jarkko Nikula <jhnikula@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/plat-omap/mcbsp.c | 44 ++++++++++++++++++++++----------------------
1 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index c1eb615..eaaf53b 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -636,26 +636,26 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
mcbsp = id_to_mcbsp_ptr(id);
base = mcbsp->io_base;
- writew(buf, base + OMAP_MCBSP_REG_DXR1);
+ OMAP_MCBSP_WRITE(base, DXR1, buf);
/* if frame sync error - clear the error */
- if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
+ if (OMAP_MCBSP_READ(base, SPCR2) & XSYNC_ERR) {
/* clear error */
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR),
- base + OMAP_MCBSP_REG_SPCR2);
+ OMAP_MCBSP_WRITE(base, SPCR2,
+ OMAP_MCBSP_READ(base, SPCR2) & (~XSYNC_ERR));
/* resend */
return -1;
} else {
/* wait for transmit confirmation */
int attemps = 0;
- while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) {
+ while (!(OMAP_MCBSP_READ(base, SPCR2) & XRDY)) {
if (attemps++ > 1000) {
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) &
- (~XRST),
- base + OMAP_MCBSP_REG_SPCR2);
+ OMAP_MCBSP_WRITE(base, SPCR2,
+ OMAP_MCBSP_READ(base, SPCR2) &
+ (~XRST));
udelay(10);
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) |
- (XRST),
- base + OMAP_MCBSP_REG_SPCR2);
+ OMAP_MCBSP_WRITE(base, SPCR2,
+ OMAP_MCBSP_READ(base, SPCR2) |
+ (XRST));
udelay(10);
dev_err(mcbsp->dev, "Could not write to"
" McBSP%d Register\n", mcbsp->id);
@@ -681,24 +681,24 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
base = mcbsp->io_base;
/* if frame sync error - clear the error */
- if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
+ if (OMAP_MCBSP_READ(base, SPCR1) & RSYNC_ERR) {
/* clear error */
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR),
- base + OMAP_MCBSP_REG_SPCR1);
+ OMAP_MCBSP_WRITE(base, SPCR1,
+ OMAP_MCBSP_READ(base, SPCR1) & (~RSYNC_ERR));
/* resend */
return -1;
} else {
/* wait for recieve confirmation */
int attemps = 0;
- while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) {
+ while (!(OMAP_MCBSP_READ(base, SPCR1) & RRDY)) {
if (attemps++ > 1000) {
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) &
- (~RRST),
- base + OMAP_MCBSP_REG_SPCR1);
+ OMAP_MCBSP_WRITE(base, SPCR1,
+ OMAP_MCBSP_READ(base, SPCR1) &
+ (~RRST));
udelay(10);
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) |
- (RRST),
- base + OMAP_MCBSP_REG_SPCR1);
+ OMAP_MCBSP_WRITE(base, SPCR1,
+ OMAP_MCBSP_READ(base, SPCR1) |
+ (RRST));
udelay(10);
dev_err(mcbsp->dev, "Could not read from"
" McBSP%d Register\n", mcbsp->id);
@@ -706,7 +706,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
}
}
}
- *buf = readw(base + OMAP_MCBSP_REG_DRR1);
+ *buf = OMAP_MCBSP_READ(base, DRR1);
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
