* Tero Kristo <tero.kristo@xxxxxxxxx> [100202 01:38]:
> From: Tero Kristo <tero.kristo@xxxxxxxxx>
>
> Only RX interrupt will now kick the sleep prevent timer. In addition, TX
> fifo status is checked before disabling clocks, this will prevent occasional
> garbage being printed on serial line. Smartidle is also disabled while
> entering idle if we have data in the transmit buffer, because having this
> enabled will prevent wakeups from the TX interrupt, and this causes
> pauses while sending large blocks of data.
Sounds this is for 2.6.34 merge window and does not contain anything
that needs to be fixed for 2.6.33.
Regards,
Tony
> Signed-off-by: Tero Kristo <tero.kristo@xxxxxxxxx>
> ---
> arch/arm/mach-omap2/serial.c | 19 +++++++++++++++----
> 1 files changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index 777e802..e11dfe9 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -317,7 +317,8 @@ static void omap_uart_allow_sleep(struct omap_uart_state *uart)
> if (!uart->clocked)
> return;
>
> - omap_uart_smart_idle_enable(uart, 1);
> + if (serial_read_reg(uart->p, UART_LSR) & UART_LSR_TEMT)
> + omap_uart_smart_idle_enable(uart, 1);
> uart->can_sleep = 1;
> del_timer(&uart->timer);
> }
> @@ -335,7 +336,11 @@ void omap_uart_prepare_idle(int num)
>
> list_for_each_entry(uart, &uart_list, node) {
> if (num == uart->num && uart->can_sleep) {
> - omap_uart_disable_clocks(uart);
> + if (serial_read_reg(uart->p, UART_LSR) &
> + UART_LSR_TEMT)
> + omap_uart_disable_clocks(uart);
> + else
> + omap_uart_smart_idle_enable(uart, 0);
> return;
> }
> }
> @@ -407,8 +412,14 @@ int omap_uart_can_sleep(void)
> static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
> {
> struct omap_uart_state *uart = dev_id;
> + u8 lsr;
>
> - omap_uart_block_sleep(uart);
> + lsr = serial_read_reg(uart->p, UART_LSR);
> + /* Check for receive interrupt */
> + if (lsr & UART_LSR_DR)
> + omap_uart_block_sleep(uart);
> + if (lsr & UART_LSR_TEMT && uart->can_sleep)
> + omap_uart_smart_idle_enable(uart, 1);
>
> return IRQ_NONE;
> }
> --
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
