Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> writes: > Update omap3_defconfig to work towards a minimal kernel by building > most things as modules. Some drivers that cannot currently be built > as modules and need to be fixed: > > - MMC: platform code uses MMC core regulator functions directly > - ASoC: drivers call omap_ctrl_[read|write] directly > > In addition some additional changes: > > - use new SLUB allocator instead of SLAB (increased debugability) > - compile with PREEMPT enabled by default > - disable OABI_COMPAT. We should not pretend to support this IMHO > - disable CPUfreq: not yet supported in mainline > - disable PM_DEBUG_VERBOSE > - enable fb/DSS2 as modules > - disable Kprobes > > zImage size comparison > before: 3160272 > after: 2610108 > > Some ideas for reducing this further: > - fix MMC and ASoC, then build those as modules > - disable all the kernel debug features > - convert MTD and all flash fs to modules > > Then, we should have platform specific initramfs configs so rootfs > from flash, MMC, etc. could be done using modules in initramfs. > > Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> After some objections over what to build as modules, I'll respin this moving a few less things to modules. In particular, I'll move everything to modules except possible rootfs sources (MTD, MMC, etc.) I'd still like to see movement towards everything as modules though using initramfs, but can save that for another step. Kevin > --- > arch/arm/configs/omap3_defconfig | 215 ++++++++++++++++++++------------------ > 1 files changed, 112 insertions(+), 103 deletions(-) > > diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig > index 2bc80d7..247f191 100644 > --- a/arch/arm/configs/omap3_defconfig > +++ b/arch/arm/configs/omap3_defconfig > @@ -1,7 +1,7 @@ > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.33-rc5 > -# Tue Jan 26 11:05:31 2010 > +# Fri Jan 29 16:02:40 2010 > # > CONFIG_ARM=y > CONFIG_SYS_SUPPORTS_APM_EMULATION=y > @@ -32,6 +32,7 @@ CONFIG_CONSTRUCTORS=y > # > CONFIG_EXPERIMENTAL=y > CONFIG_BROKEN_ON_SMP=y > +CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > @@ -105,16 +106,16 @@ CONFIG_AIO=y > # Kernel Performance Events And Counters > # > CONFIG_VM_EVENT_COUNTERS=y > +# CONFIG_SLUB_DEBUG is not set > CONFIG_COMPAT_BRK=y > -CONFIG_SLAB=y > -# CONFIG_SLUB is not set > +# CONFIG_SLAB is not set > +CONFIG_SLUB=y > # CONFIG_SLOB is not set > CONFIG_PROFILING=y > CONFIG_TRACEPOINTS=y > -CONFIG_OPROFILE=y > +CONFIG_OPROFILE=m > CONFIG_HAVE_OPROFILE=y > -CONFIG_KPROBES=y > -CONFIG_KRETPROBES=y > +# CONFIG_KPROBES is not set > CONFIG_HAVE_KPROBES=y > CONFIG_HAVE_KRETPROBES=y > CONFIG_HAVE_CLK=y > @@ -125,7 +126,6 @@ CONFIG_HAVE_CLK=y > # CONFIG_GCOV_KERNEL is not set > # CONFIG_SLOW_WORK is not set > CONFIG_HAVE_GENERIC_DMA_COHERENT=y > -CONFIG_SLABINFO=y > CONFIG_RT_MUTEXES=y > CONFIG_BASE_SMALL=0 > CONFIG_MODULES=y > @@ -251,7 +251,7 @@ CONFIG_OMAP_MUX=y > CONFIG_OMAP_MUX_DEBUG=y > CONFIG_OMAP_MUX_WARNINGS=y > CONFIG_OMAP_MCBSP=y > -# CONFIG_OMAP_MBOX_FWK is not set > +CONFIG_OMAP_MBOX_FWK=m > # CONFIG_OMAP_MPU_TIMER is not set > CONFIG_OMAP_32K_TIMER=y > CONFIG_OMAP_32K_TIMER_HZ=128 > @@ -354,13 +354,14 @@ CONFIG_VMSPLIT_3G=y > # CONFIG_VMSPLIT_2G is not set > # CONFIG_VMSPLIT_1G is not set > CONFIG_PAGE_OFFSET=0xC0000000 > -CONFIG_PREEMPT_NONE=y > +# CONFIG_PREEMPT_NONE is not set > # CONFIG_PREEMPT_VOLUNTARY is not set > -# CONFIG_PREEMPT is not set > +CONFIG_PREEMPT=y > CONFIG_HZ=128 > # CONFIG_THUMB2_KERNEL is not set > CONFIG_AEABI=y > -CONFIG_OABI_COMPAT=y > +# CONFIG_OABI_COMPAT is not set > +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y > # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set > # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set > # CONFIG_HIGHMEM is not set > @@ -394,21 +395,12 @@ CONFIG_ATAGS_PROC=y > # > # CPU Power Management > # > -CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_TABLE=y > -# CONFIG_CPU_FREQ_DEBUG is not set > -CONFIG_CPU_FREQ_STAT=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > +# CONFIG_CPU_FREQ is not set > +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set > -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set > -CONFIG_CPU_FREQ_GOV_USERSPACE=y > -CONFIG_CPU_FREQ_GOV_ONDEMAND=y > -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set > # CONFIG_CPU_IDLE is not set > > # > @@ -439,11 +431,10 @@ CONFIG_BINFMT_MISC=y > # > CONFIG_PM=y > CONFIG_PM_DEBUG=y > -CONFIG_PM_VERBOSE=y > +# CONFIG_PM_VERBOSE is not set > CONFIG_CAN_PM_TRACE=y > CONFIG_PM_SLEEP=y > CONFIG_SUSPEND=y > -# CONFIG_PM_TEST_SUSPEND is not set > CONFIG_SUSPEND_FREEZER=y > # CONFIG_APM_EMULATION is not set > # CONFIG_PM_RUNTIME is not set > @@ -539,32 +530,31 @@ CONFIG_NETFILTER_ADVANCED=y > # Network testing > # > # CONFIG_NET_PKTGEN is not set > -# CONFIG_NET_TCPPROBE is not set > # CONFIG_NET_DROP_MONITOR is not set > # CONFIG_HAMRADIO is not set > # CONFIG_CAN is not set > # CONFIG_IRDA is not set > -CONFIG_BT=y > -CONFIG_BT_L2CAP=y > -CONFIG_BT_SCO=y > -CONFIG_BT_RFCOMM=y > +CONFIG_BT=m > +CONFIG_BT_L2CAP=m > +CONFIG_BT_SCO=m > +CONFIG_BT_RFCOMM=m > CONFIG_BT_RFCOMM_TTY=y > -CONFIG_BT_BNEP=y > +CONFIG_BT_BNEP=m > CONFIG_BT_BNEP_MC_FILTER=y > CONFIG_BT_BNEP_PROTO_FILTER=y > -CONFIG_BT_HIDP=y > +CONFIG_BT_HIDP=m > > # > # Bluetooth device drivers > # > # CONFIG_BT_HCIBTUSB is not set > # CONFIG_BT_HCIBTSDIO is not set > -CONFIG_BT_HCIUART=y > +CONFIG_BT_HCIUART=m > CONFIG_BT_HCIUART_H4=y > CONFIG_BT_HCIUART_BCSP=y > CONFIG_BT_HCIUART_LL=y > -CONFIG_BT_HCIBCM203X=y > -CONFIG_BT_HCIBPA10X=y > +CONFIG_BT_HCIBCM203X=m > +CONFIG_BT_HCIBPA10X=m > # CONFIG_BT_HCIBFUSB is not set > # CONFIG_BT_HCIVHCI is not set > # CONFIG_BT_MRVL is not set > @@ -672,7 +662,6 @@ CONFIG_MTD_CFI_UTIL=y > # CONFIG_MTD_COMPLEX_MAPPINGS is not set > # CONFIG_MTD_PHYSMAP is not set > # CONFIG_MTD_ARM_INTEGRATOR is not set > -CONFIG_MTD_OMAP_NOR=y > # CONFIG_MTD_PLATRAM is not set > > # > @@ -770,7 +759,7 @@ CONFIG_HAVE_IDE=y > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > -CONFIG_SCSI=y > +CONFIG_SCSI=m > CONFIG_SCSI_DMA=y > # CONFIG_SCSI_TGT is not set > # CONFIG_SCSI_NETLINK is not set > @@ -779,7 +768,7 @@ CONFIG_SCSI_PROC_FS=y > # > # SCSI support type (disk, tape, CD-ROM) > # > -CONFIG_BLK_DEV_SD=y > +CONFIG_BLK_DEV_SD=m > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > @@ -844,7 +833,7 @@ CONFIG_SMC91X=y > # CONFIG_DM9000 is not set > # CONFIG_ENC28J60 is not set > # CONFIG_ETHOC is not set > -# CONFIG_SMC911X is not set > +CONFIG_SMC911X=y > CONFIG_SMSC911X=y > # CONFIG_DNET is not set > # CONFIG_IBM_NEW_EMAC_ZMII is not set > @@ -872,9 +861,9 @@ CONFIG_WLAN=y > # CONFIG_B43LEGACY is not set > # CONFIG_HOSTAP is not set > # CONFIG_IWM is not set > -CONFIG_LIBERTAS=y > -CONFIG_LIBERTAS_USB=y > -CONFIG_LIBERTAS_SDIO=y > +CONFIG_LIBERTAS=m > +CONFIG_LIBERTAS_USB=m > +CONFIG_LIBERTAS_SDIO=m > # CONFIG_LIBERTAS_SPI is not set > CONFIG_LIBERTAS_DEBUG=y > # CONFIG_P54_COMMON is not set > @@ -893,25 +882,25 @@ CONFIG_LIBERTAS_DEBUG=y > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > -CONFIG_USB_USBNET=y > -CONFIG_USB_NET_AX8817X=y > -CONFIG_USB_NET_CDCETHER=y > +CONFIG_USB_USBNET=m > +CONFIG_USB_NET_AX8817X=m > +CONFIG_USB_NET_CDCETHER=m > # CONFIG_USB_NET_CDC_EEM is not set > # CONFIG_USB_NET_DM9601 is not set > # CONFIG_USB_NET_SMSC95XX is not set > # CONFIG_USB_NET_GL620A is not set > -CONFIG_USB_NET_NET1080=y > +CONFIG_USB_NET_NET1080=m > # CONFIG_USB_NET_PLUSB is not set > # CONFIG_USB_NET_MCS7830 is not set > # CONFIG_USB_NET_RNDIS_HOST is not set > -CONFIG_USB_NET_CDC_SUBSET=y > +CONFIG_USB_NET_CDC_SUBSET=m > CONFIG_USB_ALI_M5632=y > CONFIG_USB_AN2720=y > CONFIG_USB_BELKIN=y > CONFIG_USB_ARMLINUX=y > CONFIG_USB_EPSON2888=y > CONFIG_USB_KC2190=y > -CONFIG_USB_NET_ZAURUS=y > +CONFIG_USB_NET_ZAURUS=m > # CONFIG_USB_NET_INT51X1 is not set > # CONFIG_WAN is not set > # CONFIG_PPP is not set > @@ -933,11 +922,11 @@ CONFIG_INPUT=y > # > # Userland interfaces > # > -CONFIG_INPUT_MOUSEDEV=y > +CONFIG_INPUT_MOUSEDEV=m > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > -CONFIG_INPUT_JOYDEV=y > +CONFIG_INPUT_JOYDEV=m > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > @@ -961,7 +950,7 @@ CONFIG_KEYBOARD_GPIO=y > CONFIG_KEYBOARD_TWL4030=y > # CONFIG_KEYBOARD_XTKBD is not set > CONFIG_INPUT_MOUSE=y > -CONFIG_MOUSE_PS2=y > +CONFIG_MOUSE_PS2=m > CONFIG_MOUSE_PS2_ALPS=y > CONFIG_MOUSE_PS2_LOGIPS2PP=y > CONFIG_MOUSE_PS2_SYNAPTICS=y > @@ -978,7 +967,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TABLET is not set > CONFIG_INPUT_TOUCHSCREEN=y > -CONFIG_TOUCHSCREEN_ADS7846=y > +CONFIG_TOUCHSCREEN_ADS7846=m > # CONFIG_TOUCHSCREEN_AD7877 is not set > # CONFIG_TOUCHSCREEN_AD7879_I2C is not set > # CONFIG_TOUCHSCREEN_AD7879_SPI is not set > @@ -1037,7 +1026,7 @@ CONFIG_DEVKMEM=y > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > -CONFIG_SERIAL_8250_NR_UARTS=32 > +CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > CONFIG_SERIAL_8250_EXTENDED=y > CONFIG_SERIAL_8250_MANY_PORTS=y > @@ -1055,9 +1044,9 @@ CONFIG_UNIX98_PTYS=y > # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set > # CONFIG_LEGACY_PTYS is not set > # CONFIG_IPMI_HANDLER is not set > -CONFIG_HW_RANDOM=y > +CONFIG_HW_RANDOM=m > # CONFIG_HW_RANDOM_TIMERIOMEM is not set > -CONFIG_HW_RANDOM_OMAP=y > +CONFIG_HW_RANDOM_OMAP=m > # CONFIG_R3964 is not set > # CONFIG_RAW_DRIVER is not set > # CONFIG_TCG_TPM is not set > @@ -1110,7 +1099,7 @@ CONFIG_SPI_MASTER=y > # > # CONFIG_SPI_BITBANG is not set > # CONFIG_SPI_GPIO is not set > -CONFIG_SPI_OMAP24XX=y > +CONFIG_SPI_OMAP24XX=m > # CONFIG_SPI_XILINX is not set > # CONFIG_SPI_DESIGNWARE is not set > > @@ -1156,7 +1145,7 @@ CONFIG_GPIO_TWL4030=y > # > # AC97 GPIO expanders: > # > -CONFIG_W1=y > +CONFIG_W1=m > CONFIG_W1_CON=y > > # > @@ -1177,14 +1166,14 @@ CONFIG_W1_CON=y > # CONFIG_W1_SLAVE_DS2433 is not set > # CONFIG_W1_SLAVE_DS2760 is not set > # CONFIG_W1_SLAVE_BQ27000 is not set > -CONFIG_POWER_SUPPLY=y > +CONFIG_POWER_SUPPLY=m > # CONFIG_POWER_SUPPLY_DEBUG is not set > # CONFIG_PDA_POWER is not set > # CONFIG_BATTERY_DS2760 is not set > # CONFIG_BATTERY_DS2782 is not set > # CONFIG_BATTERY_BQ27x00 is not set > # CONFIG_BATTERY_MAX17040 is not set > -CONFIG_HWMON=y > +CONFIG_HWMON=m > # CONFIG_HWMON_VID is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > > @@ -1264,8 +1253,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y > # Watchdog Device Drivers > # > # CONFIG_SOFT_WATCHDOG is not set > -CONFIG_OMAP_WATCHDOG=y > -CONFIG_TWL4030_WATCHDOG=y > +CONFIG_OMAP_WATCHDOG=m > +CONFIG_TWL4030_WATCHDOG=m > > # > # USB-based Watchdog Cards > @@ -1289,7 +1278,7 @@ CONFIG_MFD_CORE=y > # CONFIG_TPS65010 is not set > # CONFIG_MENELAUS is not set > CONFIG_TWL4030_CORE=y > -# CONFIG_TWL4030_POWER is not set > +CONFIG_TWL4030_POWER=y > CONFIG_TWL4030_CODEC=y > # CONFIG_MFD_TMIO is not set > # CONFIG_MFD_T7L66XB is not set > @@ -1325,13 +1314,13 @@ CONFIG_REGULATOR_TWL4030=y > # > # CONFIG_VGASTATE is not set > # CONFIG_VIDEO_OUTPUT_CONTROL is not set > -CONFIG_FB=y > +CONFIG_FB=m > CONFIG_FIRMWARE_EDID=y > # CONFIG_FB_DDC is not set > # CONFIG_FB_BOOT_VESA_SUPPORT is not set > -CONFIG_FB_CFB_FILLRECT=y > -CONFIG_FB_CFB_COPYAREA=y > -CONFIG_FB_CFB_IMAGEBLIT=y > +CONFIG_FB_CFB_FILLRECT=m > +CONFIG_FB_CFB_COPYAREA=m > +CONFIG_FB_CFB_IMAGEBLIT=m > # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set > # CONFIG_FB_SYS_FILLRECT is not set > # CONFIG_FB_SYS_COPYAREA is not set > @@ -1354,25 +1343,38 @@ CONFIG_FB_TILEBLITTING=y > # CONFIG_FB_METRONOME is not set > # CONFIG_FB_MB862XX is not set > # CONFIG_FB_BROADSHEET is not set > -CONFIG_FB_OMAP=y > CONFIG_FB_OMAP_LCD_VGA=y > -# CONFIG_FB_OMAP_031M3R is not set > -# CONFIG_FB_OMAP_048M3R is not set > -CONFIG_FB_OMAP_079M3R=y > -# CONFIG_FB_OMAP_092M9R is not set > -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set > -# CONFIG_FB_OMAP_LCD_MIPID is not set > # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set > -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 > -# CONFIG_OMAP2_DSS is not set > +CONFIG_OMAP2_VRAM=y > +CONFIG_OMAP2_VRFB=y > +CONFIG_OMAP2_DSS=m > +CONFIG_OMAP2_VRAM_SIZE=4 > +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y > +# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set > +# CONFIG_OMAP2_DSS_RFBI is not set > +CONFIG_OMAP2_DSS_VENC=y > +# CONFIG_OMAP2_DSS_SDI is not set > +# CONFIG_OMAP2_DSS_DSI is not set > +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set > +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 > +CONFIG_FB_OMAP2=m > +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y > +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set > +CONFIG_FB_OMAP2_NUM_FBS=3 > + > +# > +# OMAP2/3 Display Device Drivers > +# > +CONFIG_PANEL_GENERIC=m > +CONFIG_PANEL_SHARP_LS037V7DW01=m > CONFIG_BACKLIGHT_LCD_SUPPORT=y > -CONFIG_LCD_CLASS_DEVICE=y > +CONFIG_LCD_CLASS_DEVICE=m > # CONFIG_LCD_LMS283GF05 is not set > # CONFIG_LCD_LTV350QV is not set > # CONFIG_LCD_ILI9320 is not set > # CONFIG_LCD_TDO24M is not set > # CONFIG_LCD_VGG2432A4 is not set > -CONFIG_LCD_PLATFORM=y > +CONFIG_LCD_PLATFORM=m > CONFIG_BACKLIGHT_CLASS_DEVICE=y > CONFIG_BACKLIGHT_GENERIC=y > > @@ -1390,7 +1392,7 @@ CONFIG_DISPLAY_SUPPORT=y > # > # CONFIG_VGA_CONSOLE is not set > CONFIG_DUMMY_CONSOLE=y > -CONFIG_FRAMEBUFFER_CONSOLE=y > +CONFIG_FRAMEBUFFER_CONSOLE=m > # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set > CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y > CONFIG_FONTS=y > @@ -1414,13 +1416,13 @@ CONFIG_SOUND_OSS_CORE_PRECLAIM=y > CONFIG_SND=y > CONFIG_SND_TIMER=y > CONFIG_SND_PCM=y > -CONFIG_SND_HWDEP=y > -CONFIG_SND_RAWMIDI=y > +CONFIG_SND_HWDEP=m > +CONFIG_SND_RAWMIDI=m > CONFIG_SND_JACK=y > # CONFIG_SND_SEQUENCER is not set > CONFIG_SND_OSSEMUL=y > -CONFIG_SND_MIXER_OSS=y > -CONFIG_SND_PCM_OSS=y > +CONFIG_SND_MIXER_OSS=m > +CONFIG_SND_PCM_OSS=m > CONFIG_SND_PCM_OSS_PLUGINS=y > # CONFIG_SND_HRTIMER is not set > # CONFIG_SND_DYNAMIC_MINORS is not set > @@ -1443,7 +1445,7 @@ CONFIG_SND_DRIVERS=y > CONFIG_SND_ARM=y > CONFIG_SND_SPI=y > CONFIG_SND_USB=y > -CONFIG_SND_USB_AUDIO=y > +CONFIG_SND_USB_AUDIO=m > # CONFIG_SND_USB_CAIAQ is not set > CONFIG_SND_SOC=y > CONFIG_SND_OMAP_SOC=y > @@ -1468,11 +1470,17 @@ CONFIG_HID=y > # > # USB Input Devices > # > -CONFIG_USB_HID=y > +CONFIG_USB_HID=m > # CONFIG_HID_PID is not set > # CONFIG_USB_HIDDEV is not set > > # > +# USB HID Boot Protocol drivers > +# > +# CONFIG_USB_KBD is not set > +# CONFIG_USB_MOUSE is not set > + > +# > # Special HID drivers > # > # CONFIG_HID_A4TECH is not set > @@ -1506,7 +1514,7 @@ CONFIG_USB_SUPPORT=y > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB_ARCH_HAS_EHCI=y > -CONFIG_USB=y > +CONFIG_USB=m > CONFIG_USB_DEBUG=y > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y > > @@ -1520,7 +1528,7 @@ CONFIG_USB_SUSPEND=y > CONFIG_USB_OTG=y > # CONFIG_USB_OTG_WHITELIST is not set > # CONFIG_USB_OTG_BLACKLIST_HUB is not set > -CONFIG_USB_MON=y > +CONFIG_USB_MON=m > # CONFIG_USB_WUSB is not set > # CONFIG_USB_WUSB_CBAF is not set > > @@ -1537,7 +1545,7 @@ CONFIG_USB_MON=y > # CONFIG_USB_SL811_HCD is not set > # CONFIG_USB_R8A66597_HCD is not set > # CONFIG_USB_HWA_HCD is not set > -CONFIG_USB_MUSB_HDRC=y > +CONFIG_USB_MUSB_HDRC=m > CONFIG_USB_MUSB_SOC=y > > # > @@ -1558,7 +1566,7 @@ CONFIG_USB_MUSB_DEBUG=y > # > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > -CONFIG_USB_WDM=y > +CONFIG_USB_WDM=m > # CONFIG_USB_TMC is not set > > # > @@ -1568,7 +1576,7 @@ CONFIG_USB_WDM=y > # > # also be needed; see USB_STORAGE Help for more info > # > -CONFIG_USB_STORAGE=y > +CONFIG_USB_STORAGE=m > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > @@ -1615,10 +1623,10 @@ CONFIG_USB_LIBUSUAL=y > # CONFIG_USB_LD is not set > # CONFIG_USB_TRANCEVIBRATOR is not set > # CONFIG_USB_IOWARRIOR is not set > -CONFIG_USB_TEST=y > +CONFIG_USB_TEST=m > # CONFIG_USB_ISIGHTFW is not set > # CONFIG_USB_VST is not set > -CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET=m > CONFIG_USB_GADGET_DEBUG=y > CONFIG_USB_GADGET_DEBUG_FILES=y > CONFIG_USB_GADGET_DEBUG_FS=y > @@ -1664,8 +1672,8 @@ CONFIG_USB_OTG_UTILS=y > # CONFIG_USB_GPIO_VBUS is not set > # CONFIG_ISP1301_OMAP is not set > # CONFIG_USB_ULPI is not set > -CONFIG_TWL4030_USB=y > -CONFIG_NOP_USB_XCEIV=y > +CONFIG_TWL4030_USB=m > +CONFIG_NOP_USB_XCEIV=m > CONFIG_MMC=y > # CONFIG_MMC_DEBUG is not set > CONFIG_MMC_UNSAFE_RESUME=y > @@ -1673,9 +1681,9 @@ CONFIG_MMC_UNSAFE_RESUME=y > # > # MMC/SD/SDIO Card Drivers > # > -CONFIG_MMC_BLOCK=y > +CONFIG_MMC_BLOCK=m > CONFIG_MMC_BLOCK_BOUNCE=y > -CONFIG_SDIO_UART=y > +CONFIG_SDIO_UART=m > # CONFIG_MMC_TEST is not set > > # > @@ -1683,7 +1691,7 @@ CONFIG_SDIO_UART=y > # > # CONFIG_MMC_SDHCI is not set > # CONFIG_MMC_OMAP is not set > -CONFIG_MMC_OMAP_HS=y > +CONFIG_MMC_OMAP_HS=m > # CONFIG_MMC_AT91 is not set > # CONFIG_MMC_ATMELMCI is not set > # CONFIG_MMC_SPI is not set > @@ -1719,10 +1727,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y > # > # CONFIG_ACCESSIBILITY is not set > CONFIG_RTC_LIB=y > -CONFIG_RTC_CLASS=y > -CONFIG_RTC_HCTOSYS=y > -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > -# CONFIG_RTC_DEBUG is not set > +CONFIG_RTC_CLASS=m > > # > # RTC interfaces > @@ -1747,7 +1752,7 @@ CONFIG_RTC_INTF_DEV=y > # CONFIG_RTC_DRV_PCF8583 is not set > # CONFIG_RTC_DRV_M41T80 is not set > # CONFIG_RTC_DRV_BQ32K is not set > -CONFIG_RTC_DRV_TWL4030=y > +CONFIG_RTC_DRV_TWL4030=m > # CONFIG_RTC_DRV_S35390A is not set > # CONFIG_RTC_DRV_FM3130 is not set > # CONFIG_RTC_DRV_RX8581 is not set > @@ -1795,6 +1800,11 @@ CONFIG_RTC_DRV_TWL4030=y > # CONFIG_STAGING is not set > > # > +# CBUS support > +# > +# CONFIG_CBUS is not set > + > +# > # File systems > # > CONFIG_EXT2_FS=y > @@ -2012,8 +2022,8 @@ CONFIG_SCHED_DEBUG=y > CONFIG_SCHEDSTATS=y > CONFIG_TIMER_STATS=y > # CONFIG_DEBUG_OBJECTS is not set > -# CONFIG_DEBUG_SLAB is not set > # CONFIG_DEBUG_KMEMLEAK is not set > +CONFIG_DEBUG_PREEMPT=y > # CONFIG_DEBUG_RT_MUTEXES is not set > # CONFIG_RT_MUTEX_TESTER is not set > CONFIG_DEBUG_SPINLOCK=y > @@ -2040,11 +2050,9 @@ CONFIG_DEBUG_INFO=y > # CONFIG_BOOT_PRINTK_DELAY is not set > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_RCU_CPU_STALL_DETECTOR is not set > -# CONFIG_KPROBES_SANITY_TEST is not set > # CONFIG_BACKTRACE_SELF_TEST is not set > # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set > # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set > -# CONFIG_LKDTM is not set > # CONFIG_FAULT_INJECTION is not set > # CONFIG_LATENCYTOP is not set > # CONFIG_SYSCTL_SYSCALL_CHECK is not set > @@ -2060,6 +2068,7 @@ CONFIG_TRACING_SUPPORT=y > CONFIG_FTRACE=y > # CONFIG_FUNCTION_TRACER is not set > # CONFIG_IRQSOFF_TRACER is not set > +# CONFIG_PREEMPT_TRACER is not set > # CONFIG_SCHED_TRACER is not set > # CONFIG_ENABLE_DEFAULT_TRACERS is not set > # CONFIG_BOOT_TRACER is not set > -- > 1.6.6 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
