Madhusudhan wrote:
-----Original Message-----
From: Adrian Hunter [mailto:adrian.hunter@xxxxxxxxx]
Sent: Saturday, January 16, 2010 7:33 PM
To: Tony Lindgren
Cc: Adrian Hunter; Madhusudhan Chikkature; Paul Walmsley; linux-omap
Mailing List; linux-mmc Mailing List; Andrew Morton
Subject: [PATCH V2 0/10] omap_hsmmc changes V2
Hi
Here are some changes we need for omap_hsmmc. They are dependent on OMAP
board files so it would be simplest if the patches all went via the OMAP
tree.
This is version 2 of this patch set. Thank you Tony, Paul and Madhu for
your comments.
Changes from version 1:
- amended patch 'omap_hsmmc: Move gpio and regulator control from
board file' so that system control functions remain in the board
file
- for clarity, split patch 'omap: Rename mmc-twl4030 to hsmmc' into
'omap: Rename mmc-twl4030 files to hsmmc' and
'omap: Rename hsmmc symbols to reflect independence from twl4030'
- removed patch 'omap_hsmmc: set DVFS/PM constraints'
- added patch 'omap: Add functions for dynamic remuxing of pins'
- renamed and reworked patch 'omap: RX51: Remux to pull eMMC lines
down when powering off' (was 'omap_hsmmc: RX51: set padconfs to pull
down when powering off eMMC')
- added patch 'omap_hsmmc: Ensure regulator enable / disable are
paired'
- fixed mistakes in patch 'omap_hsmmc: Allow for a shared VccQ'
Reviewed the omap_hsmmc changes and did a sanity test on Zoom2.
Acked-by: Madhusudhan Chikkature <madhu.cr@xxxxxx>
Regards,
Madhu
Thanks Madhu. Tony, are you ok taking these patches into your tree?
Adrian Hunter (9):
omap_hsmmc: Move gpio and regulator control from board file
omap: Rename mmc-twl4030 files to hsmmc
omap: Rename hsmmc symbols to reflect independence from twl4030
omap: Reconnect hsmmc context loss count
omap: RX51: Remux to pull eMMC lines down when powering off
omap_hsmmc: Allow for power saving without going off
omap_hsmmc: Fix disable timeouts
omap_hsmmc: Ensure regulator enable / disable are paired
omap_hsmmc: Allow for a shared VccQ
Tony Lindgren (1):
omap: Add functions for dynamic remuxing of pins
arch/arm/configs/rx51_defconfig | 4 +-
arch/arm/mach-omap2/Makefile | 28 +-
arch/arm/mach-omap2/board-2430sdp.c | 6 +-
arch/arm/mach-omap2/board-3430sdp.c | 6 +-
arch/arm/mach-omap2/board-cm-t35.c | 6 +-
arch/arm/mach-omap2/board-igep0020.c | 6 +-
arch/arm/mach-omap2/board-ldp.c | 6 +-
arch/arm/mach-omap2/board-omap3beagle.c | 6 +-
arch/arm/mach-omap2/board-omap3evm.c | 6 +-
arch/arm/mach-omap2/board-omap3pandora.c | 6 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 6 +-
arch/arm/mach-omap2/board-overo.c | 6 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 63 +++-
arch/arm/mach-omap2/board-zoom-peripherals.c | 6 +-
arch/arm/mach-omap2/hsmmc.c | 261 ++++++++++++
arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} | 14 +-
arch/arm/mach-omap2/mmc-twl4030.c | 537 -------------------
-----
arch/arm/mach-omap2/mux.c | 22 +-
arch/arm/mach-omap2/mux.h | 24 +
arch/arm/plat-omap/include/plat/mmc.h | 35 ++-
drivers/mmc/host/omap_hsmmc.c | 375 ++++++++++++++++-
21 files changed, 788 insertions(+), 641 deletions(-)
create mode 100644 arch/arm/mach-omap2/hsmmc.c
rename arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} (63%)
delete mode 100644 arch/arm/mach-omap2/mmc-twl4030.c
Regards
Adrian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
