OMAP3430SDP board can use the common default values defined in
VC init code. No need to define custom values in board file.
---
arch/arm/mach-omap2/board-3430sdp.c | 19 -------------------
1 files changed, 0 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 65ab469..c924950 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -48,7 +48,6 @@
#include "mmc-twl4030.h"
#include "pm.h"
#include "omap3-opp.h"
-#include "vc.h"
#define SDP3430_TS_GPIO_IRQ_SDPV1 3
#define SDP3430_TS_GPIO_IRQ_SDPV2 2
@@ -76,23 +75,6 @@ static struct cpuidle_params omap3_cpuidle_params_table[] = {
{1, 10000, 30000, 300000},
};
-/* FIXME: These are not the optimal setup values to be used on 3430sdp*/
-static struct prm_setup_vc omap3_setuptime_table = {
- .clksetup = 0xff,
- .voltsetup_time1 = 0xfff,
- .voltsetup_time2 = 0xfff,
- .voltoffset = 0xff,
- .voltsetup2 = 0xff,
- .vdd0_on = 0x30,
- .vdd0_onlp = 0x20,
- .vdd0_ret = 0x1e,
- .vdd0_off = 0x00,
- .vdd1_on = 0x2c,
- .vdd1_onlp = 0x20,
- .vdd1_ret = 0x1e,
- .vdd1_off = 0x00,
-};
-
static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -344,7 +326,6 @@ static void __init omap_3430sdp_init_irq(void)
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
- omap3_pm_init_vc(&omap3_setuptime_table);
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL, omap3_mpu_rate_table,
omap3_dsp_rate_table, omap3_l3_rate_table);
omap_init_irq();
--
1.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
