Re: [PATCH v2 1/6] omap3: pm: re-program the sleep state of TRITON resources by modifying the REMAP register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



x0080970@xxxxxx writes:

> From: Lesly A M <x0080970@xxxxxx>
>
> omap3: pm: re-program the sleep state of TRITON resources by modifying the REMAP register

This line duplicates subject, and is duplicated when applying to git.
This causes maintainers to have t manually edit the changelog to
remove the duplicate lines.

Could I recommend that you use git-format-patch + git-send-email?

The additional From: at the top isn't necessary either when the sender
and the author are the same.  To ensure you have the right name/email
in your git-generated patches, edit/edit  ~/.gitconfig and add something
that looks like this (changing the name/email to yours of course)  ;)

[user]
	name = Kevin Hilman
	email = khilman@xxxxxxxxxxxxxxxxxxx

I also noticed that the diffstat in PATCH 0/6 did not reflect all the
files touched.  At least the twl4030-script* files are missing from
the diffstat.

Again, git-format-patch would help here.  Using the --cover-letter option
to git-format-patch would generate a template for PATCH 0/x with the right
diffstat already done.


> Removed the warning print with checking order of scripts, since the order
> is not important. Only the values configured in the register, which is pointing to
> the starting address of each sequence should be correct.
>
> Signed-off-by: Lesly A M <x0080970@xxxxxx>
> Cc: Nishanth Menon <nm@xxxxxx>
> Cc: David Derrick <dderrick@xxxxxx>
> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>

So I take it this patch can be ignored, as the equivalent is already
upstream, right?

Kevin

> ---
>  drivers/mfd/twl4030-power.c |   30 +++++++++++++++++++++++-------
>  1 file changed, 23 insertions(+), 7 deletions(-)
>
> Index: linux-omap-pm/drivers/mfd/twl4030-power.c
> ===================================================================
> --- linux-omap-pm.orig/drivers/mfd/twl4030-power.c	2010-01-19 19:18:56.000000000 +0530
> +++ linux-omap-pm/drivers/mfd/twl4030-power.c	2010-01-19 19:19:02.000000000 +0530
> @@ -416,14 +416,35 @@
>  		return err;
>  	}
>  
> -	return 0;
> +
> +	/* Set the remap sleep cmd */
> +	err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &remap,
> +					rconfig_addr + REMAP_OFFSET);
> +	if (err < 0) {
> +		printk(KERN_ERR "TWL4030 Resource %d remap could not read\n",
> +							rconfig->resource);
> +		return err;
> +	}
> +
> +	if (rconfig->remap_sleep >= 0) {
> +		remap &= ~SLEEP_STATE_MASK;
> +		remap |= rconfig->remap_sleep;
> +	}
> +
> +	err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, remap,
> +				rconfig_addr + REMAP_OFFSET);
> +	if (err < 0) {
> +		pr_err("TWL4030 failed to program remap sleep cmd \n");
> +		return err;
> +	}
> +
> +	return err;
>  }
>  
>  static int __init load_twl4030_script(struct twl4030_script *tscript,
>  	       u8 address)
>  {
>  	int err;
> -	static int order;
>  
>  	/* Make sure the script isn't going beyond last valid address (0x3f) */
>  	if ((address + tscript->size) > END_OF_SCRIPT) {
> @@ -444,7 +465,6 @@
>  		err = twl4030_config_wakeup12_sequence(address);
>  		if (err)
>  			goto out;
> -		order = 1;
>  	}
>  	if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) {
>  		err = twl4030_config_wakeup3_sequence(address);
> @@ -452,10 +472,6 @@
>  			goto out;
>  	}
>  	if (tscript->flags & TWL4030_SLEEP_SCRIPT)
> -		if (order)
> -			pr_warning("TWL4030: Bad order of scripts (sleep "\
> -					"script before wakeup) Leads to boot"\
> -					"failure on some boards\n");
>  		err = twl4030_config_sleep_sequence(address);
>  out:
>  	return err;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux