----- Original Message -----
From: "Mike Rapoport" <mike@xxxxxxxxxxxxxx>
To: <x0080970@xxxxxx>
Cc: <linux-omap@xxxxxxxxxxxxxxx>; "Nishanth Menon" <nm@xxxxxx>; "David
Derrick" <dderrick@xxxxxx>; "Samuel Ortiz" <sameo@xxxxxxxxxxxxxxx>
Sent: Wednesday, January 20, 2010 8:58 PM
Subject: Re: [PATCH v2 1/6] omap3: pm: re-program the sleep state of TRITON
resources by modifying the REMAP register
x0080970@xxxxxx wrote:
From: Lesly A M <x0080970@xxxxxx>
omap3: pm: re-program the sleep state of TRITON resources by modifying
the REMAP register
Removed the warning print with checking order of scripts, since the order
is not important. Only the values configured in the register, which is
pointing to
the starting address of each sequence should be correct.
Signed-off-by: Lesly A M <x0080970@xxxxxx>
Cc: Nishanth Menon <nm@xxxxxx>
Cc: David Derrick <dderrick@xxxxxx>
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
---
drivers/mfd/twl4030-power.c | 30 +++++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
Index: linux-omap-pm/drivers/mfd/twl4030-power.c
===================================================================
--- linux-omap-pm.orig/drivers/mfd/twl4030-power.c 2010-01-19
19:18:56.000000000 +0530
+++ linux-omap-pm/drivers/mfd/twl4030-power.c 2010-01-19
19:19:02.000000000 +0530
@@ -416,14 +416,35 @@
return err;
}
- return 0;
+
+ /* Set the remap sleep cmd */
+ err = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &remap,
+ rconfig_addr + REMAP_OFFSET);
+ if (err < 0) {
+ printk(KERN_ERR "TWL4030 Resource %d remap could not read\n",
+ rconfig->resource);
+ return err;
+ }
+
+ if (rconfig->remap_sleep >= 0) {
+ remap &= ~SLEEP_STATE_MASK;
+ remap |= rconfig->remap_sleep;
+ }
+
+ err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, remap,
+ rconfig_addr + REMAP_OFFSET);
+ if (err < 0) {
+ pr_err("TWL4030 failed to program remap sleep cmd \n");
+ return err;
+ }
+
Is it necessary to initialize the remap sleep twice?
No.
Sorry.. I didn't notice that Amit has already pushed this.
+ return err;
}
static int __init load_twl4030_script(struct twl4030_script *tscript,
u8 address)
{
int err;
- static int order;
/* Make sure the script isn't going beyond last valid address (0x3f) */
if ((address + tscript->size) > END_OF_SCRIPT) {
@@ -444,7 +465,6 @@
err = twl4030_config_wakeup12_sequence(address);
if (err)
goto out;
- order = 1;
}
if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) {
err = twl4030_config_wakeup3_sequence(address);
@@ -452,10 +472,6 @@
goto out;
}
if (tscript->flags & TWL4030_SLEEP_SCRIPT)
- if (order)
- pr_warning("TWL4030: Bad order of scripts (sleep "\
- "script before wakeup) Leads to boot"\
- "failure on some boards\n");
err = twl4030_config_sleep_sequence(address);
out:
return err;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Sincerely yours,
Mike.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
