[PATCH v2 02/18] OMAP2/3/4 clock: move DPLL clock functions into mach-omap2/clkt_dpll.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move all DPLL-related clock functions from mach-omap2/clock.c to
mach-omap2/clkt_dpll.c.  This is intended to make the clock code
easier to understand, since all of the functions needed to manage
DPLLs are now located in their own file, rather than being mixed with
other, unrelated functions.

Clock debugging is also now more finely-grained, since the DEBUG macro
can now be defined for DPLLs alone.  This should reduce unnecessary
console noise when debugging.

Also, if at some future point the mach-omap2/ directory is split
into OMAP2/3/4 variants, this clkt file can be moved to the plat-omap/
directory to be shared.

Thanks to Alexander Shishkin <virtuoso@xxxxxxxxx> for his comments to
improve the patch description.

Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Cc: Alexander Shishkin <virtuoso@xxxxxxxxx>
---
 arch/arm/mach-omap2/Makefile    |    3 
 arch/arm/mach-omap2/clkt_dpll.c |  386 +++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/clock.c     |  355 ------------------------------------
 3 files changed, 388 insertions(+), 356 deletions(-)
 create mode 100644 arch/arm/mach-omap2/clkt_dpll.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 7d46fde..1a135c8 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -8,7 +8,8 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
 omap-3-4-common				= dpll3xxx.o
 prcm-common				= prcm.o powerdomain.o
-clock-common				= clock.o clock_common_data.o clockdomain.o
+clock-common				= clock.o clock_common_data.o \
+					  clockdomain.o clkt_dpll.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
new file mode 100644
index 0000000..9eee0e6
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -0,0 +1,386 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@xxxxxx>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER		1
+#define DPLL_MIN_DIVIDER		1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW		-1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR		64
+#define DPLL_SCALE_BASE			2
+#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
+					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define DPLL_FINT_BAND1_MIN		750000
+#define DPLL_FINT_BAND1_MAX		2100000
+#define DPLL_FINT_BAND2_MIN		7500000
+#define DPLL_FINT_BAND2_MAX		21000000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW		-1
+#define DPLL_FINT_INVALID		-2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk *clk, u8 n)
+{
+	struct dpll_data *dd;
+	long fint;
+	int ret = 0;
+
+	dd = clk->dpll_data;
+
+	/* DPLL divider must result in a valid jitter correction val */
+	fint = clk->parent->rate / (n + 1);
+	if (fint < DPLL_FINT_BAND1_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "lowering max_divider\n", n);
+		dd->max_divider = n;
+		ret = DPLL_FINT_UNDERFLOW;
+
+	} else if (fint > DPLL_FINT_BAND1_MAX &&
+		   fint < DPLL_FINT_BAND2_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure\n", n);
+		ret = DPLL_FINT_INVALID;
+
+	} else if (fint > DPLL_FINT_BAND2_MAX) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "boosting min_divider\n", n);
+		dd->min_divider = n;
+		ret = DPLL_FINT_INVALID;
+
+	}
+
+	return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+					    unsigned int m, unsigned int n)
+{
+	unsigned long long num;
+
+	num = (unsigned long long)parent_rate * m;
+	do_div(num, n);
+	return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL.  Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
+ * a non-scaled m upon return.  This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+			   unsigned long target_rate,
+			   unsigned long parent_rate)
+{
+	int r = 0, carry = 0;
+
+	/* Unscale m and round if necessary */
+	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+		carry = 1;
+	*m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+	/*
+	 * The new rate must be <= the target rate to avoid programming
+	 * a rate that is impossible for the hardware to handle
+	 */
+	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+	if (*new_rate > target_rate) {
+		(*m)--;
+		*new_rate = 0;
+	}
+
+	/* Guard against m underflow */
+	if (*m < DPLL_MIN_MULTIPLIER) {
+		*m = DPLL_MIN_MULTIPLIER;
+		*new_rate = 0;
+		r = DPLL_MULT_UNDERFLOW;
+	}
+
+	if (*new_rate == 0)
+		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+	return r;
+}
+
+/* Public functions */
+
+void omap2_init_dpll_parent(struct clk *clk)
+{
+	u32 v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* Reparent in case the dpll is in bypass */
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	}
+	return;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values.  When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+u32 omap2_get_dpll_rate(struct clk *clk)
+{
+	long long dpll_clk;
+	u32 dpll_mult, dpll_div, v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return 0;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			return dd->clk_bypass->rate;
+	}
+
+	v = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = v & dd->mult_mask;
+	dpll_mult >>= __ffs(dd->mult_mask);
+	dpll_div = v & dd->div1_mask;
+	dpll_div >>= __ffs(dd->div1_mask);
+
+	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
+	do_div(dpll_clk, dpll_div + 1);
+
+	return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
+ * @clk: struct clk * of the DPLL
+ * @tolerance: maximum rate error tolerance
+ *
+ * Set the maximum DPLL rate error tolerance for the rate rounding
+ * algorithm.  The rate tolerance is an attempt to balance DPLL power
+ * saving (the least divider value "n") vs. rate fidelity (the least
+ * difference between the desired DPLL target rate and the rounded
+ * rate out of the algorithm).  So, increasing the tolerance is likely
+ * to decrease DPLL power consumption and increase DPLL rate error.
+ * Returns -EINVAL if provided a null clock ptr or a clk that is not a
+ * DPLL; or 0 upon success.
+ */
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
+{
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	clk->dpll_data->rate_tolerance = tolerance;
+
+	return 0;
+}
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL, a desired target rate, and a rate tolerance, round
+ * the target rate to a possible, programmable rate for this DPLL.
+ * Rate tolerance is assumed to be set by the caller before this
+ * function is called.  Attempts to select the minimum possible n
+ * within the tolerance to reduce power consumption.  Stores the
+ * computed (m, n) in the DPLL's dpll_data structure so set_rate()
+ * will not need to call this (expensive) function again.  Returns ~0
+ * if the target rate cannot be rounded, either because the rate is
+ * too low or because the rate tolerance is set too tightly; or the
+ * rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	int m, n, r, e, scaled_max_m;
+	unsigned long scaled_rt_rp, new_rate;
+	int min_e = -1, min_e_m = -1, min_e_n = -1;
+	struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return ~0;
+
+	dd = clk->dpll_data;
+
+	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
+		 "%ld\n", clk->name, target_rate);
+
+	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+	dd->last_rounded_rate = 0;
+
+	for (n = dd->min_divider; n <= dd->max_divider; n++) {
+
+		/* Is the (input clk, divider) pair valid for the DPLL? */
+		r = _dpll_test_fint(clk, n);
+		if (r == DPLL_FINT_UNDERFLOW)
+			break;
+		else if (r == DPLL_FINT_INVALID)
+			continue;
+
+		/* Compute the scaled DPLL multiplier, based on the divider */
+		m = scaled_rt_rp * n;
+
+		/*
+		 * Since we're counting n up, a m overflow means we
+		 * can bail out completely (since as n increases in
+		 * the next iteration, there's no way that m can
+		 * increase beyond the current m)
+		 */
+		if (m > scaled_max_m)
+			break;
+
+		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+				    dd->clk_ref->rate);
+
+		/* m can't be set low enough for this n - try with a larger n */
+		if (r == DPLL_MULT_UNDERFLOW)
+			continue;
+
+		e = target_rate - new_rate;
+		pr_debug("clock: n = %d: m = %d: rate error is %d "
+			 "(new_rate = %ld)\n", n, m, e, new_rate);
+
+		if (min_e == -1 ||
+		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
+			min_e = e;
+			min_e_m = m;
+			min_e_n = n;
+
+			pr_debug("clock: found new least error %d\n", min_e);
+
+			/* We found good settings -- bail out now */
+			if (min_e <= dd->rate_tolerance)
+				break;
+		}
+	}
+
+	if (min_e < 0) {
+		pr_debug("clock: error: target rate or tolerance too low\n");
+		return ~0;
+	}
+
+	dd->last_rounded_m = min_e_m;
+	dd->last_rounded_n = min_e_n;
+	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
+						       min_e_m,  min_e_n);
+
+	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
+		 min_e, min_e_m, min_e_n);
+	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
+		 dd->last_rounded_rate, target_rate);
+
+	return dd->last_rounded_rate;
+}
+
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d88b255..9819628 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -28,10 +28,7 @@
 #include <plat/clockdomain.h>
 #include <plat/cpu.h>
 #include <plat/prcm.h>
-#include <asm/div64.h>
 
-#include <plat/sdrc.h>
-#include "sdrc.h"
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
@@ -39,72 +36,12 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER		1
-#define DPLL_MIN_DIVIDER		1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW		-1
-
-/*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
- */
-#define DPLL_SCALE_FACTOR		64
-#define DPLL_SCALE_BASE			2
-#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
-					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define DPLL_FINT_BAND1_MIN		750000
-#define DPLL_FINT_BAND1_MAX		2100000
-#define DPLL_FINT_BAND2_MIN		7500000
-#define DPLL_FINT_BAND2_MAX		21000000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW		-1
-#define DPLL_FINT_INVALID		-2
-
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
  * OMAP2/3/4 specific clock functions
  *-------------------------------------------------------------------------*/
 
-void omap2_init_dpll_parent(struct clk *clk)
-{
-	u32 v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return;
-
-	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	/* Reparent in case the dpll is in bypass */
-	if (cpu_is_omap24xx()) {
-		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap34xx()) {
-		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap44xx()) {
-		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	}
-	return;
-}
-
 /**
  * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
  * @clk: struct clk *
@@ -127,52 +64,6 @@ static void _omap2xxx_clk_commit(struct clk *clk)
 	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 }
 
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
- *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
- */
-static int _dpll_test_fint(struct clk *clk, u8 n)
-{
-	struct dpll_data *dd;
-	long fint;
-	int ret = 0;
-
-	dd = clk->dpll_data;
-
-	/* DPLL divider must result in a valid jitter correction val */
-	fint = clk->parent->rate / (n + 1);
-	if (fint < DPLL_FINT_BAND1_MIN) {
-
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "lowering max_divider\n", n);
-		dd->max_divider = n;
-		ret = DPLL_FINT_UNDERFLOW;
-
-	} else if (fint > DPLL_FINT_BAND1_MAX &&
-		   fint < DPLL_FINT_BAND2_MIN) {
-
-		pr_debug("rejecting n=%d due to Fint failure\n", n);
-		ret = DPLL_FINT_INVALID;
-
-	} else if (fint > DPLL_FINT_BAND2_MAX) {
-
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "boosting min_divider\n", n);
-		dd->min_divider = n;
-		ret = DPLL_FINT_INVALID;
-
-	}
-
-	return ret;
-}
-
 /**
  * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
  * @clk: OMAP clock struct ptr to use
@@ -243,62 +134,6 @@ void omap2_init_clksel_parent(struct clk *clk)
 }
 
 /**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values.  When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-u32 omap2_get_dpll_rate(struct clk *clk)
-{
-	long long dpll_clk;
-	u32 dpll_mult, dpll_div, v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return 0;
-
-	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	if (cpu_is_omap24xx()) {
-		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap34xx()) {
-		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap44xx()) {
-		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			return dd->clk_bypass->rate;
-	}
-
-	v = __raw_readl(dd->mult_div1_reg);
-	dpll_mult = v & dd->mult_mask;
-	dpll_mult >>= __ffs(dd->mult_mask);
-	dpll_div = v & dd->div1_mask;
-	dpll_div >>= __ffs(dd->div1_mask);
-
-	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
-	do_div(dpll_clk, dpll_div + 1);
-
-	return dpll_clk;
-}
-
-/**
  * omap2_clk_dflt_find_companion - find companion clock to @clk
  * @clk: struct clk * to find the companion clock of
  * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -858,196 +693,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	return 0;
 }
 
-/* DPLL rate rounding code */
-
-/**
- * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
- * @clk: struct clk * of the DPLL
- * @tolerance: maximum rate error tolerance
- *
- * Set the maximum DPLL rate error tolerance for the rate rounding
- * algorithm.  The rate tolerance is an attempt to balance DPLL power
- * saving (the least divider value "n") vs. rate fidelity (the least
- * difference between the desired DPLL target rate and the rounded
- * rate out of the algorithm).  So, increasing the tolerance is likely
- * to decrease DPLL power consumption and increase DPLL rate error.
- * Returns -EINVAL if provided a null clock ptr or a clk that is not a
- * DPLL; or 0 upon success.
- */
-int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
-{
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	clk->dpll_data->rate_tolerance = tolerance;
-
-	return 0;
-}
-
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
-					    unsigned int m, unsigned int n)
-{
-	unsigned long long num;
-
-	num = (unsigned long long)parent_rate * m;
-	do_div(num, n);
-	return num;
-}
-
-/*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL.  Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
- * a non-scaled m upon return.  This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
- */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
-			   unsigned long target_rate,
-			   unsigned long parent_rate)
-{
-	int r = 0, carry = 0;
-
-	/* Unscale m and round if necessary */
-	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
-		carry = 1;
-	*m = (*m / DPLL_SCALE_FACTOR) + carry;
-
-	/*
-	 * The new rate must be <= the target rate to avoid programming
-	 * a rate that is impossible for the hardware to handle
-	 */
-	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-	if (*new_rate > target_rate) {
-		(*m)--;
-		*new_rate = 0;
-	}
-
-	/* Guard against m underflow */
-	if (*m < DPLL_MIN_MULTIPLIER) {
-		*m = DPLL_MIN_MULTIPLIER;
-		*new_rate = 0;
-		r = DPLL_MULT_UNDERFLOW;
-	}
-
-	if (*new_rate == 0)
-		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
-	return r;
-}
-
-/**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
- *
- * Given a DPLL, a desired target rate, and a rate tolerance, round
- * the target rate to a possible, programmable rate for this DPLL.
- * Rate tolerance is assumed to be set by the caller before this
- * function is called.  Attempts to select the minimum possible n
- * within the tolerance to reduce power consumption.  Stores the
- * computed (m, n) in the DPLL's dpll_data structure so set_rate()
- * will not need to call this (expensive) function again.  Returns ~0
- * if the target rate cannot be rounded, either because the rate is
- * too low or because the rate tolerance is set too tightly; or the
- * rounded rate upon success.
- */
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
-{
-	int m, n, r, e, scaled_max_m;
-	unsigned long scaled_rt_rp, new_rate;
-	int min_e = -1, min_e_m = -1, min_e_n = -1;
-	struct dpll_data *dd;
-
-	if (!clk || !clk->dpll_data)
-		return ~0;
-
-	dd = clk->dpll_data;
-
-	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
-		 "%ld\n", clk->name, target_rate);
-
-	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
-	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
-	dd->last_rounded_rate = 0;
-
-	for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
-		/* Is the (input clk, divider) pair valid for the DPLL? */
-		r = _dpll_test_fint(clk, n);
-		if (r == DPLL_FINT_UNDERFLOW)
-			break;
-		else if (r == DPLL_FINT_INVALID)
-			continue;
-
-		/* Compute the scaled DPLL multiplier, based on the divider */
-		m = scaled_rt_rp * n;
-
-		/*
-		 * Since we're counting n up, a m overflow means we
-		 * can bail out completely (since as n increases in
-		 * the next iteration, there's no way that m can
-		 * increase beyond the current m)
-		 */
-		if (m > scaled_max_m)
-			break;
-
-		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    dd->clk_ref->rate);
-
-		/* m can't be set low enough for this n - try with a larger n */
-		if (r == DPLL_MULT_UNDERFLOW)
-			continue;
-
-		e = target_rate - new_rate;
-		pr_debug("clock: n = %d: m = %d: rate error is %d "
-			 "(new_rate = %ld)\n", n, m, e, new_rate);
-
-		if (min_e == -1 ||
-		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
-			min_e = e;
-			min_e_m = m;
-			min_e_n = n;
-
-			pr_debug("clock: found new least error %d\n", min_e);
-
-			/* We found good settings -- bail out now */
-			if (min_e <= dd->rate_tolerance)
-				break;
-		}
-	}
-
-	if (min_e < 0) {
-		pr_debug("clock: error: target rate or tolerance too low\n");
-		return ~0;
-	}
-
-	dd->last_rounded_m = min_e_m;
-	dd->last_rounded_n = min_e_n;
-	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
-						       min_e_m,  min_e_n);
-
-	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
-		 min_e, min_e_m, min_e_n);
-	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
-		 dd->last_rounded_rate, target_rate);
-
-	return dd->last_rounded_rate;
-}
-
 /*-------------------------------------------------------------------------
  * Omap2 clock reset and init functions
  *-------------------------------------------------------------------------*/


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux