* Tony Lindgren <tony@xxxxxxxxxxx> [100113 12:38]: > * Tony Lindgren <tony@xxxxxxxxxxx> [100113 12:36]: > > > > You might want to check what happens in omap off-idle mode in these cases > > and see if enabling OMAP_PIN_OFF_INPUT_PULLDOWN makes any difference in > > power consumption in off state. That probably does not matter unless the > > floating lines cause the eMMC to do something on it's own :) > > Or OMAP_PIN_OFF_OUTPUT_LOW actually. One more time.. Most likely OMAP_PIN_OFF_INPUT_PULLDOWN is safer in general as the OMAP_PIN_OFF_OUTPUT_LOW does not work for all pins. According to the TRM, OMAP_PIN_OFF_OUTPUT_LOW only works for pins where at least one of the mux modes supports output mode. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
