Hi all, I'm having problems trying to run the SDIO WLAN module on my IGEP v2 board using the latest omap kernel (2.6.33-rc2). The SDIO WLAN module is connected to the MMC2 using 4 wires. With an older kernel ( 2.6.28 ) works fine but the same configuration with 2.6.33-rc2 do not detect the SDIO card. Any idea to solve the problem ? There is a substantial modification in this driver. Any help will be appreciated. I attached the log. Thanks in advance, Enric [ 24.521484] mmci-omap-hs mmci-omap-hs.1: DISABLED -> ENABLED [ 24.522003] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 [ 24.522033] mmci-omap-hs mmci-omap-hs.1: ENABLED -> DISABLED [ 24.522308] mmci-omap-hs mmci-omap-hs.1: DISABLED -> ENABLED [ 24.522338] mmc1: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 65535 width 0 timing 0 [ 24.545104] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 65535 width 0 timing 0 [ 24.568298] mmc1: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 65535 width 0 timing 0 [ 24.569335] mmc1: starting CMD0 arg 00000000 flags 000000c0 [ 24.569366] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD0, argument 0x00000000 [ 24.569519] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 1 [ 24.569549] mmc1: req done (CMD0): 0: 00000000 00000000 00000000 00000000 [ 24.572540] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 65535 width 0 timing 0 [ 24.573547] mmc1: starting CMD8 arg 000000aa flags 000002f5 [ 24.573577] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD8, argument 0x000000aa [ 24.573913] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.573913] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.573944] mmc1: req done (CMD8): -110: 00000000 00000000 00000000 00000000 [ 24.575744] mmc1: starting CMD5 arg 00000000 flags 000002e1 [ 24.575775] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD5, argument 0x00000000 [ 24.576110] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.576141] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.576171] mmc1: req failed (CMD5): -110, retrying... [ 24.576171] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD5, argument 0x00000000 [ 24.576507] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.576538] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.576568] mmc1: req failed (CMD5): -110, retrying... [ 24.576568] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD5, argument 0x00000000 [ 24.576904] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.576934] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.576934] mmc1: req failed (CMD5): -110, retrying... [ 24.576965] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD5, argument 0x00000000 [ 24.577301] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.577331] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.577331] mmc1: req done (CMD5): -110: 00000000 00000000 00000000 00000000 [ 24.578247] mmc1: starting CMD55 arg 00000000 flags 000000f5 [ 24.578247] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD55, argument 0x00000000 [ 24.578582] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.578613] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.578643] mmc1: req done (CMD55): -110: 00000000 00000000 00000000 00000000 [ 24.580444] mmc1: starting CMD55 arg 00000000 flags 000000f5 [ 24.580474] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD55, argument 0x00000000 [ 24.580810] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.580810] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.580841] mmc1: req done (CMD55): -110: 00000000 00000000 00000000 00000000 [ 24.582641] mmc1: starting CMD55 arg 00000000 flags 000000f5 [ 24.582672] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD55, argument 0x00000000 [ 24.583007] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.583007] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.583038] mmc1: req done (CMD55): -110: 00000000 00000000 00000000 00000000 [ 24.584899] mmc1: starting CMD55 arg 00000000 flags 000000f5 [ 24.584899] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD55, argument 0x00000000 [ 24.585235] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.585266] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.585296] mmc1: req done (CMD55): -110: 00000000 00000000 00000000 00000000 [ 24.587097] mmc1: starting CMD1 arg 00000000 flags 000000e1 [ 24.587097] mmci-omap-hs mmci-omap-hs.1: mmc1: CMD1, argument 0x00000000 [ 24.587432] mmci-omap-hs mmci-omap-hs.1: IRQ Status is 18000 [ 24.587463] mmci-omap-hs mmci-omap-hs.1: MMC IRQ 0x18000 : ERRI CTO [ 24.587493] mmc1: req done (CMD1): -110: 00000000 00000000 00000000 00000000 [ 24.589294] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 [ 24.623962] mmci-omap-hs mmci-omap-hs.1: ENABLED -> DISABLED -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
