Hello,
Few little comments bellow.
On Tue, Jan 05, 2010 at 07:36:08AM +0100, ext Vishwanath BS wrote:
> DPLL4 for 3630 introduces a changed block requiring special divisor
> bits and additional reg fields. To allow for silicons to use this, this
> is introduced as a omap3_has_jtype_dpll4() and is enabled for 3630
^
I don't see anywhere in this patch a reference to this function/macro
> silicon. Also FREQSEL field is no longer valid for OMAP3630. So reference
> to this is removed for 3630.
>
> Tested with 3630 ZOOM3 and OMAP3430 ZOOM2
>
> Cc: Paul Walmsley <paul@xxxxxxxxx>
>
> Signed-off-by: Richard Woodruff <r-woodruff2@xxxxxx>
> Signed-off-by: Nishanth Menon <nm@xxxxxx>
> Signed-off-by: Vishwanath BS <Vishwanath.bs@xxxxxx>
> ---
> arch/arm/mach-omap2/clock.h | 3 ++
> arch/arm/mach-omap2/clock34xx_data.c | 2 +
> arch/arm/mach-omap2/clock44xx_data.c | 1 +
> arch/arm/mach-omap2/cm-regbits-34xx.h | 6 +++-
> arch/arm/mach-omap2/dpll.c | 53 ++++++++++++++++++++++++++++--
> arch/arm/plat-omap/include/plat/clock.h | 1 +
> 6 files changed, 61 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
> index 93c48df..14f73e7 100644
> --- a/arch/arm/mach-omap2/clock.h
> +++ b/arch/arm/mach-omap2/clock.h
> @@ -47,6 +47,9 @@
> #define DPLL_LOW_POWER_BYPASS 0x5
> #define DPLL_LOCKED 0x7
>
> +/*DPLL Type and DCO Selection Flags*/
> +#define DPLL_J_TYPE 0x1
> +#define DPLL_NO_DCO_SEL 0x2
Add blank line here, just to make it cleaner.
> int omap2_clk_init(void);
> int omap2_clk_enable(struct clk *clk);
> void omap2_clk_disable(struct clk *clk);
> diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
> index 043caed..9aac354 100644
> --- a/arch/arm/mach-omap2/clock34xx_data.c
> +++ b/arch/arm/mach-omap2/clock34xx_data.c
> @@ -3241,6 +3241,8 @@ int __init omap2_clk_init(void)
> cpu_clkflg |= CK_3430ES2;
> }
> }
> + if (cpu_is_omap3630())
> + dpll4_ck.dpll_data->flags |= DPLL_J_TYPE;
>
> clk_init(&omap2_clk_functions);
>
> diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
> index 2210e22..7347246 100644
> --- a/arch/arm/mach-omap2/clock44xx_data.c
> +++ b/arch/arm/mach-omap2/clock44xx_data.c
> @@ -2736,6 +2736,7 @@ int __init omap2_clk_init(void)
> if (cpu_is_omap44xx()) {
> cpu_mask = RATE_IN_4430;
> cpu_clkflg = CK_443X;
> + dpll_usb_ck.dpll_data->flags |= DPLL_NO_DCO_SEL | DPLL_J_TYPE;
> }
>
> clk_init(&omap2_clk_functions);
> diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
> index 6923deb..6f2802b 100644
> --- a/arch/arm/mach-omap2/cm-regbits-34xx.h
> +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
> @@ -516,9 +516,13 @@
>
> /* CM_CLKSEL2_PLL */
> #define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8
> -#define OMAP3430_PERIPH_DPLL_MULT_MASK (0x7ff << 8)
> +#define OMAP3430_PERIPH_DPLL_MULT_MASK (0xfff << 8)
> #define OMAP3430_PERIPH_DPLL_DIV_SHIFT 0
> #define OMAP3430_PERIPH_DPLL_DIV_MASK (0x7f << 0)
> +#define OMAP3630_PERIPH_DPLL_DCO_SEL_SHIFT 21
> +#define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK (0x7 << 21)
> +#define OMAP3630_PERIPH_DPLL_SD_DIV_SHIFT 24
> +#define OMAP3630_PERIPH_DPLL_SD_DIV_MASK (0xff << 24)
>
> /* CM_CLKSEL3_PLL */
> #define OMAP3430_DIV_96M_SHIFT 0
> diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c
> index f6055b4..d52ab37 100644
> --- a/arch/arm/mach-omap2/dpll.c
> +++ b/arch/arm/mach-omap2/dpll.c
> @@ -238,6 +238,42 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
> }
>
> /**
> + * lookup_dco_sddiv - Set j-type DPLL4 compensation variables
> + * @clk: pointer to a DPLL struct clk
> + * @dco: digital control oscillator selector
> + * @sd_div: target sigma-delta divider
> + * @m: DPLL multiplier to set
> + * @n: DPLL divider to set
> + */
> +static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16
> + m, u8 n)
> + {
> + unsigned long fint, clkinp, sd; /* watch out for overflow */
> + int mod1, mod2;
> +
> + clkinp = clk->parent->rate;
> + fint = (clkinp / n) * m;
> +
> + if (fint < 1000000000)
> + *dco = 2;
> + else
> + *dco = 4;
> + /*
> + * target sigma-delta to near 250MHz
> + * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
> + */
> + clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2*/
> + mod1 = (clkinp * m) % (250 * n);
> + sd = (clkinp * m) / (250 * n);
> + mod2 = sd % 10;
> + sd /= 10;
> +
> + if (mod1 + mod2)
> + sd++;
I think would make sense to change the above condition to a real boolean expression.
I know this is not required, but increases code readability.
> + *sd_div = sd;
> +}
> +
> +/**
> * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
> * @clk: pointer to a DPLL struct clk
> *
> @@ -311,7 +347,7 @@ int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
> _omap3_noncore_dpll_bypass(clk);
>
> /* Set jitter correction */
> - if (!cpu_is_omap44xx()) {
> + if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
Is the above really related to J_TYPE of DPLL4 (as patch subject)?
> v = __raw_readl(dd->control_reg);
> v &= ~dd->freqsel_mask;
> v |= freqsel << __ffs(dd->freqsel_mask);
> @@ -323,6 +359,15 @@ int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
> v &= ~(dd->mult_mask | dd->div1_mask);
> v |= m << __ffs(dd->mult_mask);
> v |= (n - 1) << __ffs(dd->div1_mask);
> +
> + if ((dd->flags & DPLL_J_TYPE) && !(dd->flags & DPLL_NO_DCO_SEL)) {
> + u8 dco, sd_div;
> + lookup_dco_sddiv(clk, &dco, &sd_div, m, n);
> + v &= ~(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK
> + | OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
> + v |= dco << __ffs(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK);
> + v |= sd_div << __ffs(OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
> + }
> __raw_writel(v, dd->mult_div1_reg);
>
> /* We let the clock framework set the other output dividers later */
> @@ -384,8 +429,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
> if (dd->last_rounded_rate == 0)
> return -EINVAL;
>
> - /* No freqsel on OMAP4 */
> - if (!cpu_is_omap44xx()) {
> + /* No freqsel on OMAP4 and OMAP3630 */
> + if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
dito
> freqsel = _omap3_dpll_compute_freqsel(clk,
> dd->last_rounded_n);
> if (!freqsel)
> @@ -530,7 +575,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
>
> v = __raw_readl(dd->control_reg) & dd->enable_mask;
> v >>= __ffs(dd->enable_mask);
> - if (v != OMAP3XXX_EN_DPLL_LOCKED)
> + if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
> rate = clk->parent->rate;
> else
> rate = clk->parent->rate * 2;
> diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
> index 309b6d1..15d0d9a 100644
> --- a/arch/arm/plat-omap/include/plat/clock.h
> +++ b/arch/arm/plat-omap/include/plat/clock.h
> @@ -62,6 +62,7 @@ struct dpll_data {
> void __iomem *idlest_reg;
> u32 autoidle_mask;
> u32 freqsel_mask;
> + u8 flags;
It would be nice to add some comment for this new field, as it is generically named "flags".
> u32 idlest_mask;
> u8 auto_recal_bit;
> u8 recal_en_bit;
> --
> 1.5.6.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Eduardo Valentin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
