ARM : OMAP : Remove #ifdef from board-omap3evm.c
Remove #ifdef around usb_nop_xceiv_register()from
board-omap3evm.c
Signed-off-by: Maulik Mankad <x0082077@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxx>
Cc: Olof Johansson <olof@xxxxxxxxx>
Cc: Gupta, Ajay Kumar <ajay.gupta@xxxxxx>
---
Index: felipe_musb/arch/arm/mach-omap2/board-omap3evm.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3evm.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3evm.c
@@ -444,10 +444,10 @@ static void __init omap3_evm_init(void)
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
-#ifdef CONFIG_NOP_USB_XCEIV
+
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
-#endif
+
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
