each board will have a different mode which is peculiar
to that board.
Cc: linux-usb@xxxxxxxxxxxxxxx
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
arch/arm/mach-omap2/board-2430sdp.c | 3 ++-
arch/arm/mach-omap2/board-3430sdp.c | 3 ++-
arch/arm/mach-omap2/board-cm-t35.c | 3 ++-
arch/arm/mach-omap2/board-igep0020.c | 3 ++-
arch/arm/mach-omap2/board-ldp.c | 3 ++-
arch/arm/mach-omap2/board-omap3beagle.c | 3 ++-
arch/arm/mach-omap2/board-omap3evm.c | 3 ++-
arch/arm/mach-omap2/board-omap3pandora.c | 3 ++-
arch/arm/mach-omap2/board-omap3touchbook.c | 3 ++-
arch/arm/mach-omap2/board-overo.c | 3 ++-
arch/arm/mach-omap2/board-rx51.c | 3 ++-
arch/arm/mach-omap2/board-zoom-peripherals.c | 3 ++-
arch/arm/mach-omap2/usb-musb.c | 13 ++++---------
arch/arm/plat-omap/include/plat/usb.h | 3 ++-
14 files changed, 30 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d3857d6..45d3197 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -23,6 +23,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/usb/musb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -203,7 +204,7 @@ static void __init omap_2430sdp_init(void)
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
twl4030_mmc_init(mmc);
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
board_smc91x_init();
/* Turn off secondary LCD backlight */
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 1d52fd1..37e7328 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -24,6 +24,7 @@
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/usb/musb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -664,7 +665,7 @@ static void __init omap_3430sdp_init(void)
ARRAY_SIZE(sdp3430_spi_board_info));
ads7846_dev_init();
omap_serial_init();
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
board_smc91x_init();
sdp3430_display_init();
enable_board_wakeup_source();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 56922f4..9d5db6b 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -27,6 +27,7 @@
#include <linux/input/matrix_keypad.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/usb/musb.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
@@ -585,7 +586,7 @@ static void __init cm_t35_init(void)
cm_t35_init_ethernet();
cm_t35_init_led();
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
}
MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 16be1d5..6fc0608 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -216,7 +217,7 @@ static void __init igep2_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
igep2_i2c_init();
omap_serial_init();
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
igep2_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ca2acd2..7e8c8a8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -27,6 +27,7 @@
#include <linux/i2c/twl.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/usb/musb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -394,7 +395,7 @@ static void __init omap_ldp_init(void)
ARRAY_SIZE(ldp_spi_board_info));
ads7846_dev_init();
omap_serial_init();
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
twl4030_mmc_init(mmc);
/* link regulators to MMC adapters */
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 52f65e6..17f6381 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -23,6 +23,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/usb/musb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -443,7 +444,7 @@ static void __init omap3_beagle_init(void)
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
usb_ehci_init(&ehci_pdata);
omap3beagle_flash_init();
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c5fd85d..1160004 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -23,6 +23,7 @@
#include <linux/input/matrix_keypad.h>
#include <linux/leds.h>
#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -469,7 +470,7 @@ static void __init omap3_evm_init(void)
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
}
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
omap3evm_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b0cdf77..191b75c 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -29,6 +29,7 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
+#include <linux/usb/musb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -413,7 +414,7 @@ static void __init omap3pandora_init(void)
omap3pandora_ads7846_init();
usb_ehci_init(&ehci_pdata);
pandora_keys_gpio_init();
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index f7f7670..287b914 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -23,6 +23,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/usb/musb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -545,7 +546,7 @@ static void __init omap3_touchbook_init(void)
spi_register_board_info(omap3_ads7846_spi_board_info,
ARRAY_SIZE(omap3_ads7846_spi_board_info));
omap3_ads7846_init();
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
usb_ehci_init(&ehci_pdata);
omap3touchbook_flash_init();
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4e07a08..df04029 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -28,6 +28,7 @@
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/usb/musb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -420,7 +421,7 @@ static void __init overo_init(void)
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_serial_init();
overo_flash_init();
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
usb_ehci_init(&ehci_pdata);
overo_ads7846_init();
overo_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 0e19316..2480870 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -16,6 +16,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/usb/musb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -82,7 +83,7 @@ static void __init rx51_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
- usb_musb_init(0);
+ usb_musb_init(MUSB_PERIPHERAL, 0);
rx51_peripherals_init();
/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index abb5fc2..f157733 100755
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/usb/musb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -267,5 +268,5 @@ void __init zoom_peripherals_init(void)
{
omap_i2c_init();
omap_serial_init();
- usb_musb_init(100);
+ usb_musb_init(MUSB_OTG, 100);
}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index b4b8ccc..884336f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -114,17 +114,11 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
- .mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
- .mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
-#endif
/* .clock is set dynamically */
.set_clock = musb_set_clock,
.config = &musb_config,
/* .power = DYNAMIC, */
+ /* .mode = DYNAMIC, */
};
static u64 musb_dmamask = DMA_BIT_MASK(32);
@@ -141,7 +135,7 @@ static struct platform_device musb_device = {
.resource = musb_resources,
};
-void __init usb_musb_init(unsigned power)
+void __init usb_musb_init(enum musb_mode mode, unsigned power)
{
if (cpu_is_omap243x())
musb_resources[0].start = OMAP243X_HS_BASE;
@@ -155,6 +149,7 @@ void __init usb_musb_init(unsigned power)
*/
musb_plat.clock = "ick";
musb_plat.power = power >> 1;
+ musb_plat.mode = mode;
if (platform_device_register(&musb_device) < 0) {
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
@@ -163,7 +158,7 @@ void __init usb_musb_init(unsigned power)
}
#else
-void __init usb_musb_init(unsigned power)
+void __init usb_musb_init(enum musb_mode mode, unsigned power)
{
}
#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 1b779a1..1e03105 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,6 +3,7 @@
#ifndef __ASM_ARCH_OMAP_USB_H
#define __ASM_ARCH_OMAP_USB_H
+#include <linux/usb/musb.h>
#include <plat/board.h>
#define OMAP3_HS_USB_PORTS 3
@@ -42,7 +43,7 @@ struct ehci_hcd_omap_platform_data {
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-extern void usb_musb_init(unsigned power);
+extern void usb_musb_init(enum musb_mode mode, unsigned power);
extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
--
1.6.6.35.g1d85d
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
