Re: SR2: VDD autocomp is not active

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you for your reply ,

But another thing appears and also the system hangs up after
activation the ondemand governor

OPP4 doesn't support SmartReflex
SR1: VDD autocomp not activated

P.S:- I did as you told me by echo 1>sys/power/,,,etc


Regards,

On Mon, Dec 28, 2009 at 9:48 AM, Romit Dasgupta <romit@xxxxxx> wrote:
>
> tarek attia wrote:
> > Hi all,
> >
> > Each time I enable the ondemand governor ,it works fine for a while
> > ,but each time the frequency is changed this messages appears :-
> >
> > SR1: VDD autocomp is not active
> >
> > then it works again ,but after small amount of time this messages
> > appears followed by hang up for the overall system
> >
> > SR2: VDD autocomp is not active
> >
> >
>
> try this:
> echo 1 > /sys/power/sr_vdd1_autocomp; echo 1 > /sys/power/sr_vdd2_autocomp
>



--
tarek
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux