> Zoom3 board has omap3630 EHCI port2 connected to a ULPI phy.
> GPIO_64 is connected to the PHY reset pin.
>
> Signed-off-by: Vikram Pandita <vikram.pandita@xxxxxx>
> Cc: Gadiyar, Anand <gadiyar@xxxxxx>
Except for one comment (see below),
Acked-by: Anand Gadiyar <gadiyar@xxxxxx>
> ---
> arch/arm/mach-omap2/board-zoom3.c | 16 ++++++++++++++++
> 1 files changed, 16 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
> index a9fe918..a5e8036 100644
> --- a/arch/arm/mach-omap2/board-zoom3.c
> +++ b/arch/arm/mach-omap2/board-zoom3.c
> @@ -20,6 +20,8 @@
>
> #include <plat/common.h>
> #include <plat/board.h>
> +#include <plat/usb.h>
> +#include <plat/mux.h>
I don't think you need plat/mux.h here?
The omap_mux_init_gpio() call that you added, is declared
in mux.h, that's included on the next line.
>
> #include "mux.h"
> #include "sdram-hynix-h8mbx00u0mer-0em.h"
> @@ -51,11 +53,25 @@ static struct omap_board_mux board_mux[] __initdata = {
> #define board_mux NULL
> #endif
>
> +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
> + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
> + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> +
> + .phy_reset = true,
> + .reset_gpio_port[0] = -EINVAL,
> + .reset_gpio_port[1] = 64,
> + .reset_gpio_port[2] = -EINVAL
> +};
> +
> static void __init omap_zoom_init(void)
> {
> omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
> zoom_peripherals_init();
> zoom_debugboard_init();
> +
> + omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
> + usb_ehci_init(&ehci_pdata);
> }
>
> MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
> --
> 1.6.6.rc0.66.ge160d
>
> --
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
