On 12/17/2009 10:20 PM, Niamathullah sharief wrote: > Hello, > I am trying to compile my kernel for ARM Processor. when i do that i > am getting some following error. I didnt find what will be the > problem. > > Hi, > root@ariem-desktop:/home/ariem/Desktop/kernels/linux-2.6.28-006rc8# > make CROSS_COMPILE=/home/ariem/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi- > uImage > CHK include/linux/version.h > make[1]: `include/asm-arm/mach-types.h' is up to date. > CHK include/linux/utsrelease.h > SYMLINK include/asm -> include/asm-arm > CALL scripts/checksyscalls.sh > <stdin>:1097:2: warning: #warning syscall fadvise64 not implemented > <stdin>:1265:2: warning: #warning syscall migrate_pages not implemented > <stdin>:1321:2: warning: #warning syscall pselect6 not implemented > <stdin>:1325:2: warning: #warning syscall ppoll not implemented > <stdin>:1365:2: warning: #warning syscall epoll_pwait not implemented > CC init/main.o > /tmp/cczCT0T5.s: Assembler messages: > /tmp/cczCT0T5.s:255: Error: selected processor does not support `cpsie i' > /tmp/cczCT0T5.s:704: Error: selected processor does not support `cpsid i' > /tmp/cczCT0T5.s:712: Error: selected processor does not support `cpsid i' > /tmp/cczCT0T5.s:726: Error: selected processor does not support `cpsid i' > /tmp/cczCT0T5.s:740: Error: selected processor does not support `cpsid i' > /tmp/cczCT0T5.s:812: Error: selected processor does not support `cpsid i' > /tmp/cczCT0T5.s:837: Error: selected processor does not support `cpsie i' > make[1]: *** [init/main.o] Error 1 > make: *** [init] Error 2 > root@ariem-desktop:/home/ariem/Desktop/kernels/linux-2.6.28-006rc8# > > Kindly help me > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Unless you're using an OMAP-based ARM processor, this is probably not the right list to be asking this. You're also not giving sufficient information for anyone to help you much - what processor and what hardware platform are you compiling for? In any case, have you run the proper defconfig for your board - see, for example, the discussion below: http://linux.omap.com/pipermail/linux-omap-open-source/2007-August/010792.html Good luck! Eino-Ville Talvala Computer Graphics Lab Stanford University -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
