> -----Original Message----- > From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc- > owner@xxxxxxxxxxxxxxx] On Behalf Of Madhusudhan > Sent: Thursday, December 10, 2009 11:32 AM > To: 'Adrian Hunter'; 'Phaneedra Kumar Alapati'; 'Dirk Behme' > Cc: linux-omap@xxxxxxxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; 'Paasikivi > Teemu.3 (EXT-Ixonos/Tampere)' > Subject: RE: [PATCH]OMAP35xx:SDIO IRQ Support for OMAP35xx > > > > > -----Original Message----- > > From: Adrian Hunter [mailto:adrian.hunter@xxxxxxxxx] > > Sent: Thursday, December 10, 2009 3:20 AM > > To: Phaneedra Kumar Alapati > > Cc: linux-omap@xxxxxxxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; Madhusudhan > > Chikkature; Adrian Hunter; Paasikivi Teemu.3 (EXT-Ixonos/Tampere) > > Subject: Re: [PATCH]OMAP35xx:SDIO IRQ Support for OMAP35xx > > > > CC'ing linux-mmc list and the maintainer Madhusudhan Chikkature > > and others who might be interested. > > > > I and Dirk had reviewed this patch previously on LO. > > Dirk? > > Also, the patch seems to have some issue. The checkpatch.pl through the > below error. > > ERROR: patch seems to be corrupt (line wrapped?) > #42: FILE: drivers/mmc/host/omap_hsmmc.c:440: > struct mmc_command *cmd, > > total: 1 errors, 0 warnings, 123 lines checked > > sdio/OMAP35xx.patch has style problems, please review. If any of these > errors > are false positives report them to the maintainer, see > CHECKPATCH in MAINTAINERS. > > > > > -------- Original Message -------- > > From: Phaneedra Kumar Alapati <phani@xxxxxxxxxxx> > > To: linux-omap@xxxxxxxxxxxxxxx <linux-omap@xxxxxxxxxxxxxxx> > > CC: phani@xxxxxxxxxxx <phani@xxxxxxxxxxx> > > Date: Thu, 10 Dec 2009 08:24:57 +0100 > > Subject: [PATCH]OMAP35xx:SDIO IRQ Support for OMAP35xx > > Thread-Topic: [PATCH]OMAP35xx:SDIO IRQ Support for OMAP35xx > > Thread-Index: Acp5aeARQUQJtw2USfCUiuj07cawqQ== > > Message-ID: <8B7FC6A3798741D6B3E3284E1A8D7A27@embwise16de1b5> > > > > This patch adds SDIO IRQ support for OMAP35xx. Tested on OMAP3530EVM > > with Marvell 88W8686 card and below are the observed throughput results > > (ttcp utility): 13Mbps (Downlink), 10.5 Mbps(Uplink) > > > > Did you also test MMC/SD cards just to make sure that memory cards > functionality is not broken in any way? Just a sanity check. > > > Signed-off-by: Phaneendra Kumar <phani@xxxxxxxxxxx> Hi Phaneedra, Overall the patch looks good based on the previous thread of discussion we had in LO. Can you please resend the patch using "git send email" so that lines are not wrapped? Regards, Madhu > > --- > > drivers/mmc/host/omap_hsmmc.c | 55 > > ++++++++++++++++++++++++++++++++++++---- > > 1 files changed, 49 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/mmc/host/omap_hsmmc.c > b/drivers/mmc/host/omap_hsmmc.c > > index 4b23225..fa94580 100644 > > --- a/drivers/mmc/host/omap_hsmmc.c > > +++ b/drivers/mmc/host/omap_hsmmc.c > > @@ -100,6 +100,10 @@ > > #define SRD (1 << 26) > > #define SOFTRESET (1 << 1) > > #define RESETDONE (1 << 0) > > +#define CIRQ (1 << 8) > > +#define CIRQ_ENABLE (1 << 8) > > +#define CTPL (1 << 11) > > +#define CLKEXTFREE (1 << 16) > > > > /* > > * FIXME: Most likely all the data using these _DEVID defines should > come > > @@ -171,6 +175,7 @@ struct omap_hsmmc_host { > > int vdd; > > int protect_card; > > int reqs_blocked; > > + int sdio_int; > > > > struct omap_mmc_platform_data *pdata; > > }; > > @@ -436,6 +441,13 @@ omap_hsmmc_start_command(struct omap_hsmmc_host > > *host, > > struct mmc_command *cmd, > > else > > OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); > > > > + if (host->sdio_int) { > > + OMAP_HSMMC_WRITE(host->base, ISE, > > + (OMAP_HSMMC_READ(host->base, ISE) | CIRQ_ENABLE)); > > + OMAP_HSMMC_WRITE(host->base, IE, > > + (OMAP_HSMMC_READ(host->base, IE) | CIRQ_ENABLE)); > > + } > > + > > host->response_busy = 0; > > if (cmd->flags & MMC_RSP_PRESENT) { > > if (cmd->flags & MMC_RSP_136) > > @@ -640,6 +652,17 @@ static irqreturn_t omap_hsmmc_irq(int irq, void > > *dev_id) > > > > spin_lock(&host->irq_lock); > > > > + data = host->data; > > + status = OMAP_HSMMC_READ(host->base, STAT); > > + dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); > > + > > + if (host->mmc->caps & MMC_CAP_SDIO_IRQ) { > > + if (status & CIRQ) { > > + dev_dbg(mmc_dev(host->mmc), "SDIO Card > > Interrupt\n"); > > + mmc_signal_sdio_irq(host->mmc); > > + } > > + } > > + > > if (host->mrq == NULL) { > > OMAP_HSMMC_WRITE(host->base, STAT, > > OMAP_HSMMC_READ(host->base, STAT)); > > @@ -649,10 +672,6 @@ static irqreturn_t omap_hsmmc_irq(int irq, void > > *dev_id) > > return IRQ_HANDLED; > > } > > > > - data = host->data; > > - status = OMAP_HSMMC_READ(host->base, STAT); > > - dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); > > - > > if (status & ERR) { > > #ifdef CONFIG_MMC_DEBUG > > omap_hsmmc_report_irq(host, status); > > @@ -1254,6 +1273,25 @@ static int omap_hsmmc_get_ro(struct mmc_host > *mmc) > > return mmc_slot(host).get_ro(host->dev, 0); > > } > > > > +static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int > enable) > > +{ > > + struct omap_hsmmc_host *host = mmc_priv(mmc); > > + > > + host->sdio_int = enable; > > + if (enable) { > > + OMAP_HSMMC_WRITE(host->base, ISE, > > + (OMAP_HSMMC_READ(host->base, ISE) | CIRQ_ENABLE)); > > + OMAP_HSMMC_WRITE(host->base, IE, > > + (OMAP_HSMMC_READ(host->base, IE) | CIRQ_ENABLE)); > > + } else { > > + OMAP_HSMMC_WRITE(host->base, IE, > > + (OMAP_HSMMC_READ(host->base, IE) & (~CIRQ_ENABLE))); > > + OMAP_HSMMC_WRITE(host->base, ISE, > > + (OMAP_HSMMC_READ(host->base, ISE) & > > (~CIRQ_ENABLE))); > > + } > > + > > +} > > + > > static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) > > { > > u32 hctl, capa, value; > > @@ -1519,7 +1557,7 @@ static const struct mmc_host_ops omap_hsmmc_ops = > { > > .set_ios = omap_hsmmc_set_ios, > > .get_cd = omap_hsmmc_get_cd, > > .get_ro = omap_hsmmc_get_ro, > > - /* NYET -- enable_sdio_irq */ > > + .enable_sdio_irq = omap_hsmmc_enable_sdio_irq, > > }; > > > > static const struct mmc_host_ops omap_hsmmc_ps_ops = { > > @@ -1529,7 +1567,7 @@ static const struct mmc_host_ops omap_hsmmc_ps_ops > = > > { > > .set_ios = omap_hsmmc_set_ios, > > .get_cd = omap_hsmmc_get_cd, > > .get_ro = omap_hsmmc_get_ro, > > - /* NYET -- enable_sdio_irq */ > > + .enable_sdio_irq = omap_hsmmc_enable_sdio_irq, > > }; > > > > #ifdef CONFIG_DEBUG_FS > > @@ -1657,6 +1695,7 @@ static int __init omap_hsmmc_probe(struct > > platform_device *pdev) > > host->mapbase = res->start; > > host->base = ioremap(host->mapbase, SZ_4K); > > host->power_mode = -1; > > + host->sdio_int = 0; > > > > platform_set_drvdata(pdev, host); > > INIT_WORK(&host->mmc_carddetect_work, omap_hsmmc_detect); > > @@ -1744,6 +1783,10 @@ static int __init omap_hsmmc_probe(struct > > platform_device *pdev) > > if (mmc_slot(host).nonremovable) > > mmc->caps |= MMC_CAP_NONREMOVABLE; > > > > + mmc->caps |= MMC_CAP_SDIO_IRQ; > > + OMAP_HSMMC_WRITE(host->base, CON, > > + OMAP_HSMMC_READ(host->base, CON) | (CTPL | > > CLKEXTFREE)); > > + > > omap_hsmmc_conf_bus_power(host); > > > > /* Select DMA lines */ > > -- > > 1.6.3.3 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
